No, Menards does not install toilets. Menards is a home improvement store that sells products from other manufacturers. While they do offer installation services for certain products, they do not install toilets themselves.
If you need a new toilet installed, it is best to contact a local plumber who is trained and experienced in doing this type of work.
How much does it cost to have someone put in a new toilet?
The cost of having someone install a new toilet can vary greatly depending on the type of toilet you choose and the complexity of the installation. A standard, one-piece toilet installation can cost anywhere from $100 to $400, while a more complex, two-piece installation can range from $200 to $500.
That said, the exact cost to have a new toilet put in will depend on the type of toilet you choose, the complexity of the installation, the labor costs in your area, and the installation materials you need such as plumbing fixtures, anchors and mounting hardware.
In addition to the cost of labor, you may also need to purchase a toilet wax ring, toilet bolts, a toilet supply line and other components necessary for a successful installation. All in all, the cost of having a new toilet put in can range anywhere from around $150 for a basic installation to over $600 for a more complex installation.
How much does it cost to install a toilet near me?
The cost to install a toilet near you will vary depending on the type of toilet you’re interested in, what type of installation is needed, and the professional you hire to perform the installation. Some types of toilet installations are more complex than others, such as when installing a toilet in a bathroom that was previously without one or if the toilet needs to be connected to the existing plumbing.
Additionally, the cost of the toilet itself will factor into the overall cost.
The estimated cost for the installation of a basic toilet in a pre-existing bathroom starts around $400 for labor and another $240 for the materials. However, it could be higher or lower depending on the complexity of the job, the type of toilet being installed and the specific location.
You can find plumbers in your area through a website like HomeAdvisor or a company like Home Depot.
Can you install a toilet without a plumber?
Yes, it is possible to install a toilet without a plumber, although it is generally not recommended. A complete toilet installation requires both knowledge and specialized tools, which a non-plumber may not possess.
While modern toilets are designed to make the process self-explanatory, there are still complex steps and connections needed to be properly completed, including plumbing connections, sewage lines, wax rings, and more.
In the hands of an experienced DIYer, the project may be able to be completed with success; however, it is always wise to consider the long-term security of the installation and possible water damage that may occur down the line if it is not correctly completed.
Enlisting the help of a licensed plumber is the safest option when installing a new toilet.
How long does it take to remove a toilet and install a new one?
On average, it takes about 2-4 hours to remove a toilet and install a new one. The exact duration of time depends on the type of toilet you are replacing, the work involved in the installation, and whether you are doing the work yourself or hiring a professional.
If you decide to remove and install the toilet yourself, the process would include shutting off the water supply to the toilet, disconnecting the water supply lines, then unbolting the toilet from the floor and removing it.
The new toilet can be installed by reversing the process, making sure the new toilet is connected correctly to the water supply and properly bolted to the floor. The process can take longer if the new toilet you are installing requires further plumbing or adjustments.
If you are hiring a professional to do the job, the cost and duration of the project will depend on the type of work involved, the cost of any supplies required, and the hourly rate of the contractor.
It is best to get an estimate from the contractor before you hire them to do the work.
Is it worth it to replace old toilet?
Replacing an old toilet can be well worth the effort. Not only can a new toilet be more efficient in terms of water usage and reduce your water bill, but it can also improve the look and feel of any bathroom.
Newer toilets come with a variety of features such as dual flush, comfort height, and low-flow capacity for an even more efficient flush. With a sleeker design, you can also increase the overall aesthetic appeal of the bathroom.
Furthermore, a new toilet will come with a better warranty than an old one, meaning that any mechanical issues that may arise can be solved quickly and easily. All in all, replacing an old toilet could be a great decision to make.
Can I replace a toilet myself?
Yes, it is possible to replace a toilet yourself, but it is not the easiest of jobs and it is essential to exercise caution and ensure that the job is done safely and properly. You should ensure that the water is completely shut off at the water supply valve, and that all of the necessary tools and supplies are gathered before attempting to replace a toilet.
It is best to start by disconnecting any pipes connected to the toilet and then removing the bolts that secure the toilet to the floor. You can then lift the toilet off the floor. When replacing the toilet, you will need to install a wax ring to ensure a watertight seal.
It is also important to ensure that the closet bolts are tightly secured to the floor before securing the toilet to the floor using new bolts and fastenings. After these steps, you can connect the water supply and test out the toilet to make sure there are no leaks.
If this process seems too daunting or you are uncertain in your ability to replace the toilet yourself, it is best to contact a professional plumber for assistance.
Is replacing a toilet worth it?
Replacing a toilet can be worth it if you are looking to upgrade or replace an old or outdated model in your bathroom. A new toilet can provide many improvements such as improved water conservation and efficiency, pressure, better flushing power, and more modern designs.
An upgraded toilet could save you money in the long run due to increased water efficiency and it could add value to your home in the event that you decide to sell it. Additionally, if your toilet is over 10 years old, it is likely to be using antiquated and outdated technology, so replacing it with an updated model could be a smart decision.
Finally, replacing an old, stained, or broken toilet could improve the overall look and feel of your bathroom. In conclusion, replacing a toilet is worth it if you are looking to upgrade or replace an outdated or broken model, or if you want to increase efficiency and improve the aesthetic of your bathroom.
What is the size for a toilet?
The standard size for a residential toilet is between 15 and 18 inches from the floor to the seat, or from the floor to the flange. The standard bowl is typically 15 inches long and 12 inches wide, while the standard tank is 16.
5 inches high and 20. 5 inches wide. Tank widths can range from 25 to 28 inches. Some longer toilets may be up to 24 inches wide. Standard toilet depths range from 28 to 30 inches. Many toilets are available in ADA compliant versions that measure 17 to 19 inches from floor to seat and are designed for individuals who require a higher seat level.
When measuring for a toilet, make sure the bathroom door will still be able to open fully and that you can still reach the plumbing connections.
Do I need a 10 or 12-inch toilet?
This is largely an individual preference, however, it may depend on the size of your bathroom. Generally, a 10-inch toilet bowl is standard, although some bathrooms may be more suited for a 12-inch model.
If the room is large enough, a 12-inch bowl may offer more comfort, but if the room is small it may be more aesthetically pleasing to opt for the smaller 10-inch model. Additionally, the flush mechanism of the toilet may also determine the size of the toilet bowl that is most suitable for the space.
It is important to research the different models to check for compatibility with the flush. Additionally, factors like style, design, and color should also be considered when making the decision. To make sure that the right choice is made, it is recommended to measure the space and have a professional determine the suitable size.
Are all toilets 12 inches from wall?
No, not all toilets are 12 inches from the wall. The distance of a toilet from the wall can vary depending on the size of the toilet and the size of the bathroom. Most toilets are either 10 or 12 inches from the wall, but this distance can vary from 6 to 14 inches, depending on the style of the toilet and the available space.
Many other factors can also affect the distance of a toilet from the wall, such as the type of toilet, the type of installation, and the location of the toilet in the bathroom. It is important to measure the exact distance of your toilet from the wall and select the best location for it to ensure proper installation.
Always consult a professional or expert to check if the selected placement is ideal for your toilet.
How much room is needed for a toilet?
The amount of room needed for a toilet depends on several factors, including the size of the toilet, the layout of the room, and the size and type of fixtures. Generally speaking, an area of at least 60 to 72 inches wide and 44 to 56 inches deep is recommended for a standard toilet installation.
This includes some extra space around the toilet of at least 15 inches from the nearest wall or other fixture to allow for ease of use. Additionally, a full bathroom (or water closet) needs at least one clear path of at least 36 inches wide for wheelchair access, no matter the size of the room.
If opting for a larger toilet, such as a comfort-height model, the space will need to be assessed to provide an adequate fit and allow for ease of use. Furthermore, a corner-mount or angled installation may need extra room to accommodate the necessary pivots and elbows.
It is important to note that a larger toilet requires more floor space, so it may be beneficial to plan accordingly.
Overall, it is important to consider the layout of the entire bathroom, any required clearances, the size of the toilet, and any extra features such as an extended seat to ensure a successful installation.
Depending on the specific details of the project, professional consultation may be necessary for a more accurate evaluation of the needed space for a toilet.
Is 2 feet wide enough for a toilet?
2 feet is not wide enough for a toilet. Generally, the minimum space needed for a toilet is between 24-30 inches, or 2-2 and a half feet, otherwise known as a 60-76 cm clearance. This ensures that the toilet has enough room to be installed and allows for enough space for someone to use it.
In order for a toilet to be comfortable for users, it should ideally be placed 3 feet from any other item and the toilet should be at least 15 inches from the side wall or any obstruction such as a door.
Are toilets One size fits all?
No, toilets are not one size fits all. Toilet size, shape and design vary greatly, depending on manufactured brand and the specific toilet model that is chosen. The size and shape of the toilet bowl and tank, as well as the distance from the floor, the height of the seat and the type of flush system all affect the fit of the toilet.
Furthermore, the size of the space available in the bathroom and the arrangement of the plumbing will also determine whether a particular toilet will fit in a given space. It is important to measure the rough-in dimensions (distance from the wall to the toilet flange) and compare them to the dimensions of the new toilet before purchasing to determine whether it will fit.
Some toilets are designed to fit in a tighter space than traditional toilets. Thus, it is essential to assess the available space in the bathroom and select a model that is the right size and fits comfortably in the space before making a purchase.
Are most toilets 2 or 3 inch?
Most residential toilets use a 3-inch flush valve, but many commercial toilets use a 2-inch flush valve. Manufacturers have begun to install toilets with 2-inch flappers in some residential applications, such as wall-mounted or corner toilets but the standard size flapper is still 3-inch.
Consumers should refer to the specific details of the toilet in question when determining the size of the valve required. In general, toilets with larger water tanks require larger flush valves and toilets with smaller water tanks require smaller flush valves.
The size of the flush valve should be noted in the documentation for the toilet, so take this into consideration when purchasing a new toilet.