The reason why toilets typically have the handle on the right side is because the majority of people in the US are right-handed. When people use the toilet, they naturally reach for the handle with their right hand to flush afterwards.
Therefore, it is more practical and comfortable to have the toilet handle on the right side so that people can easily reach it.
Historically, toilets were designed to be operated by foot pedals, however, over time it became more common to have handles, with the first toilets sporting a lever instead of a handle. It is not entirely known why the lever, and then the handle was placed on the right side, but, since right-handers outnumber left-handers, it was simply the most logical place for the handle.
Should toilet lever be on right or left?
It really depends on preference. Typically, the toilet flush lever is mounted on the right side of most standard toilets, but it can be installed in the left side of the tank upon request. Some people prefer the lever to be located on the left side, while others find it much easier to have the handle be on the right side, depending on their individual needs.
Ultimately, it boils down to the user’s preferences and the capabilities of the toilet installation. Before you make the decision, you should take into account your individual needs and the dimensions of the bathroom design to ensure that the toilet flusher lever is placed in a comfortable, accessible spot.
Where should a toilet handle be?
The toilet handle should be positioned on the left side of the cistern (the water tank mounted on the wall behind or adjacent to the toilet). The handle should be placed approximately 4-6 inches away from the back of the cistern and approximately 10-11 inches off the ground.
This position is best for giving the user easy access to the handle and for optimizing the effectiveness of the flushing mechanism. Additionally, the handle should be centered in the middle of the cistern as this is often where the flushing mechanism is.
What does left hand toilet mean?
A left hand toilet typically refers to a type of toilet that features the tank on the left side as opposed to the right when looking at the toilet from the front. Left hand toilets are usually preferred because the don’t take up as much space and there is more room for people to walk on the right side.
They are also more aesthetically pleasing and create a more spacious feel to the bathroom. Left hand toilets can also offer more options for placement of accessory items such as toilet paper holders, grab bars, and towel holders.
The flush handle may also be more comfortably placed for left handed users.
Are all toilet handles the same?
No, not all toilet handles are the same. Toilet handles come in many different varieties and styles. Some of the most common types include lever handles, button handles, T handles, rocker handles, and trip levers.
Lever handles are traditional, easy to use, and highly versatile. Button handles are more modern, with a button that needs to be pressed to flush the toilet. T handles offer a more cylindrical shape and a single lever release mechanism.
Rocker handles provide a different design, where the handle needs to be rocked back and forth to flush. Lastly, trip levers are typically used on tanks-in-walls, such as in commercial buildings. Other handles like the traditional wire handle and compression handles have largely gone out of fashion.
Ultimately, the type of toilet handle you choose depends on your preference and the aesthetic of the bathroom.
Which way should toilet valve face?
The toilet valve should face the wall that is on the back side of the toilet tank. You want the valve facing away from you so it is not in your direct line of vision when you walk into the bathroom. The valve should typically be located just beneath the floor level, so it does not interfere with any other fixtures in the bathroom.
It should also be aligned with the back of the toilet in order for the water line to be properly connected. It is important to make sure the valve is well secured and sealed to prevent any water leakage in the future.
Can you change the direction your toilet faces?
Yes, it is possible to change the direction a toilet faces. It is essentially a process of removing the toilet from the floor and essentially doing a full 180-degree turn. The best way to do this is to first remove the toilet’s seat and lid, as well as take off the supply line from the wall.
With these things removed from the toilet, it can be lifted from the floor using a suction cup or with another person’s assistance. After it has been repositioned in the desired location, secure the toilet to the floor using bolts.
Reattach the supply line to the wall, the lid and the toilet seat back to the toilet, and the toilet will now face in the new direction it was moved to.
What are the different types of toilet handles?
There are numerous types of toilet handles available for residential and commercial use. The most common types are:
1. Lever Handle – Most toilets have lever handles. These make it easy to flush with one hand, and they normally have color-coded index marks that indicate which way to press the lever for a partial or full flush.
2. Push/Button Flush – Push/button flushes are becoming more popular since they are easier to use and have a clean, modern look. Some models even have dual flushing options, allowing you to choose either a partial or full flush.
3. Touch-Less/Sensor Flush – Touch-less/sensor flushes are the most advanced type of toilet handle. They use motion sensors to trigger the flush when you enter and leave the bathroom.
4. Chain Pulls – Chain pulls are used in some older-style toilets and involve pressing a chain to flush the toilet.
5. Foot Pedal Flush – Foot pedal flushes are often found in commercial settings, such as hotels and restaurants. They involve pressing a pedal with your foot to flush the toilet.
No matter what type of handle you choose, it is important to make sure it is secure, fits properly, and is easy to use.
Is a toilet handle universal?
No, a toilet handle is not universal. While many toilets share common features, the handle is one of the features that can vary from model to model. Depending on the type of toilet you purchase, the handle can look different and the mounting system used to attach it to the tank can also be different from model to model.
Furthermore, different brands can use completely different handles and connecting systems. There are, however, some universal handles that can fit most toilet models. These handles are designed with universal components that enable them to fit a variety of different toilets.
In addition, many stores carry universal handles, so it pays to take your time to shop around and find the right handle for your toilet.
Why does my toilet have two handles?
Most toilets have two handles because one handle controls the water level in the toilet tank and the other handle controls the flushing action. The handle that controls the water level uses a float and mechanism to control the amount of water in the tank.
This mechanism allows the user to adjust how much water is used for each flush. The other handle is the flushing handle, which uses the water in the tank to flush the toilet. When the handle is pushed down, it opens the flapper valve, which allows the water to rush into the bowl and flush the toilet.
Having two handles on the toilet allows it to be easily adjusted to accommodate different levels of water usage. With two handles, users can adjust their toilet to use more water or less water depending on the needs of their household.
Can you swap out toilet handles?
Yes, you can swap out toilet handles. The first step is to shut off the water and flush. Then, unscrew the old handle with a screwdriver and remove it. Next, measure the distance between the mounting holes on the new handle and compare that to the original handle to make sure they are the same size.
Once you’ve confirmed they are the same size, attach the new handle with the screws. Finally, turn the water back on and test your new handle. If it isn’t working, ensure that it is tightened properly and check that the chain is properly attached from the handle and to the flapper.
What is the handle on a toilet called?
The handle on a toilet is generally referred to as the “flusher” or flush handle. The flusher handle is typically located on the top of the toilet tank, although some toilets may have the handle located on the side.
This handle is used to activate and control the flushing action of the toilet, which uses water to flush waste down and out of the bowl. This handle can come in different styles, such as a straight handle, a lever handle, a push button, or a crossbar handle.
Toilets with multiple flush options might also feature a dual-flush handle, allowing users to choose between a low-volume flush and a full-volume flush.
What tools do you need to replace a toilet handle?
In order to replace a toilet handle, you will need the following tools:
1. Pliers – These will be needed to remove the old handle and hardware from the toilet.
2. Adjustable Wrench – You will need this to remove the water supply line from the toilet tank.
3. Screwdriver – This will be needed to remove the toilet handle from the toilet tank.
4. Hand Level – This will help you make sure that the handle is properly aligned when you install it.
5. Toilet Flapper – This will be used to replace the old flapper and make sure the toilet flushes properly.
6. New Toilet Handle kit – This will come with the necessary parts needed to replace the existing handle.
7. Plumber’s Putty – This is important to seal the toilet handle in place.
8. Phillips screwdriver – If the replacement handle has phillips screws then you will need this.
9. Wrench – This will be used to tighten the water supply line back onto the toilet.
Finally, you will want to make sure you have extra screws, washers, nuts and bolts on hand in case any of the existing ones are missing or damaged.
How do you replace a toilet handle without a chain?
Replacing a toilet handle without a chain is a fairly straightforward process. Here is an overview of the process:
1. First, turn off the water supply to the toilet and flush the toilet to drain the tank.
2. Disconnect the water line from the wall: the waterline is typically a flexible white hose from the wall to the tank.
3. Loosen the handle’s mounting nut on the inside of the tank, using a pair of pliers. This should allow you to remove the flush handle.
4. Then, install the new handle: attach the handle’s mounting arm to the valve shaft and then secure it in place with the mounting nut.
5. Next, reattach the water line to the tank and turn the water supply back on.
6. Test the handle by lifting it up and down to ensure it is fully functional.
7. Finally, you will need to adjust the handle to ensure it flushes properly. To do this, adjust the chain on the flapper to the desired length.
And there you have it! You have successfully replaced a toilet handle without a chain.
Are there right handed toilets?
Yes, there are toilets designed specifically for right-handed users. These toilets feature a wider toilet bowl area that is located further to the right for better comfort. Additionally, the tanks are usually located on the right side to provide greater comfort for right-handed users.
Toilet designs with right-handed orientation are becoming increasingly popular as it allows right-handed users to comfortably use the toilet.