It is possible that the plunger is not unclogging the toilet because the clog is too deep or large for the plunger to clear. Clogs can be caused by a variety of factors, including too much toilet paper buildup, a large foreign object, or roots from a tree or shrub entering the sewer line.
If the plunger is not unclogging the toilet, it is best to call a plumber to handle clearing the clog, as stronger tools and equipment may be needed for a more difficult clog. Additionally, if you have a septic system, it could be an indication that your tank needs pumping out, or a blockage in the septic line itself.
A professional plumber can help you determine the cause of the blockage and provide the necessary service to unclog your toilet.
How do you unclog a toilet if the plunger doesn’t work?
If the plunger doesn’t work to unclog a toilet, you should try using a plumbing snake, otherwise known as a drain auger. You can purchase these from a hardware store for around $20. To use the snake, insert the end of the cable into the toilet drain, and start turning the crank clockwise until you feel resistance.
Continue cranking, and when you feel the snake has found the clog, jiggle the snake until the clog breaks. Finally, you should run water into the toilet to rinse out any debris that the auger may have dislodged.
If this method still doesn’t work, you should then check the S-trap to make sure there are no clogs, and if necessary, remove the S-trap and clear any clogs you may find. If all else fails, you should then call a plumber.
Why is my toilet still clogged even after I use the plunger?
If your toilet is still clogged after using the plunger, it’s likely the blockage is too far down the drain for the plunger to reach. A broken pipe, or a more serious underlying issue. If the plunger isn’t providing any relief, it’s probably time to call a plumber who will be able to assess the problem and provide you with an appropriate solution.
The plumber can check to see if the clog is due to a build-up of materials in the pipe or a more serious underlying issue that needs repairs. They can also use more specialized tools and techniques to clear the blockage.
It is always best not to attempt to fix a blocked toilet yourself.
How do you unclog a badly clogged toilet?
Unclogging a badly clogged toilet can be tricky and messy. The first step is to attempt to plunge the toilet to push the blockage out. If that doesn’t work, you may need to shut off the water supply to the toilet; usually located under the tank itself.
If you are lucky enough the blockage may be caused by a hard object, such as a toy or a toothbrush, and removing it with a pair of tongs can solve the problem. Additionally, a drain snake or toilet auger can be used to reach and clear the blockage.
You must be sure to use specially made ones for toilets as regular versions are too stiff and can cause damage to the actual toilet. To keep the clog from happening again, you should make sure to clean out the pipes regularly with a homemade solution such as baking soda, vinegar and hot water.
How long does it take to unclog a toilet with a plunger?
The amount of time it takes to unclog a toilet with a plunger depends on several factors, such as the kind of clog, the size and shape of the plunger, the power of the plunger, how large the plunger is, and how much water is in the toilet.
It can generally take anywhere from five minutes to an hour to unclog a toilet with a plunger. To maximize the efficiency of your plunger, you will want to get a plunger with a flange, as this will help seal the base of the toilet and create a better suction.
Once the plunger is in place, create a tight seal on the sides of the bowl and begin pushing and pulling on the plunger. It may help to add warm water to the bowl to help the clog to dissolve. Finally, you will want to repeat this process several times to make sure that the clog is completely gone.
Why won’t my toilet unclog with a plunger?
If a clog is severe enough, a plunger alone won’t be enough to unclog the toilet and a plumber may be needed. Some possible reasons include objects lodged in the toilet that are too large to be dislodged with a plunger (such as sanitary pads, rags, toys, etc.
), the toilet having a curved bowl or difficult to reach obstructions such as a broken tile, or lodged objects at the base of the toilet. Severe clogs can also be caused by incorrect or excessive amounts of toilet paper being flushed or when too much paper is combined with inadequate flushing power.
Additionally, a plunger may not be able to create enough suction to dislodge the clog, especially if the clog is due to a buildup of minerals and sediments. In these cases, it is best to use a combination of a plunger and a handheld auger, also known as a plumber’s snake.
Will a toilet eventually unclog itself?
No, a toilet will not unclog itself. Toilets can become clogged for a variety of reasons, such as blockages caused by human waste, baby wipes, inappropriate toilet paper, foreign objects, tree root intrusion, and mineral buildup.
To unclog toilets, plungers, augers/plumbers snakes, drain cleaners/clearing agents, and snaking machines may be necessary. One should never use bleach to try to unclog a toilet, as bleach compound can corrode the plumbing and cause more damage to the environment.
How do you force a toilet to unclog?
If the toilet is clogged and unable to flush, there are several things you can try to force it to unclog. The first thing to try is plunging the toilet. Position the plunger over the hole at the bottom and push down on the handle several times in quick succession.
If this does not work, you can try a drain snake. Insert the snake into the hole at the bottom of the toilet and move it around to dislodge the clog. If all else fails, you may need to use chemical drain cleaners.
Follow the instructions carefully, as some of these products can be dangerous if used improperly. If the clog still won’t budge, you may need to call a professional plumber.