The most common cause is that the bolts that hold the seat in place have not been properly tightened, or they may have worked loose over time. In some instances, the bolts may not be properly aligned, causing them to not stay tight.
Additionally, the bolts may be too long or too short, which can also make them difficult to keep secure. It is also possible that the plastic nuts used to hold the seat in place have worn down or cracked over time, leading to a loose seat.
Lastly, if the toilet was recently installed, the seat may not be securely attached because the holes in the base may not have been pre-drilled. Ensuring that the bolts and the plastic nuts are seated securely and that the holes in the base of the toilet are properly pre-drilled will usually fix this issue.
Why won t my toilet seat stay still?
There could be a few reasons why your toilet seat won’t stay still.
The first, and most common issue, is that the bolts that connect the toilet seat to the bowl may not be tightened securely. This can cause the seat to come loose and wiggle. To fix this, use a wrench to make sure the bolts have been secured tightly.
Another issue could be that the hinge bolts are stuck or corroded. This may be a result of a buildup of mineral deposits, water, and other materials over time. To solve this issue, simply take a clean cloth and pour some vinegar on it.
Then, wipe down the hinge bolts to remove any corrosion or debris.
On the other hand, the toilet seat may not fit the bowl properly. If this is the case, you’ll need to replace the seat. Make sure you know the size of your toilet seat and bowl before you purchase a new one to ensure it fits properly.
Finally, if you still cannot get the toilet seat to stay still, you may need to call a licensed plumber for assistance. They can help diagnose the problem and recommend the best fix for your situation.
How do you tighten a toilet seat on a toilet?
Tightening a toilet seat on a toilet is a relatively simple process. It requires a few hand tools and several quick steps.
First, locate the round, flat plastic caps on the underside of the toilet seat. These caps cover the bolts, the nuts, and the washers that hold the seat in place. This can be done from the top of the toilet better, which may require lifting the seat.
Using a Phillips screwdriver, loosen the nuts on each side of the seat by turning them counterclockwise. When the nuts are loosened, you can remove them and access the bolts, as well as the washers located just below them.
Check that the old washers are in good condition and not cracked or misshapen, as these can cause the toilet seat to wobble or become loose over time. If needed, replace the old washers with new ones of the same size.
Next, slide the toilet seat’s hinge plates into their respective slots on the back of the toilet. This will secure the toilet seat to the toilet and make it easier to put the nuts and bolts back into place.
Be sure to position the hinge plates so that the toilet seat and the lid are both positioned evenly and securely.
Next, replace the nuts, making them both snug, but not too tight. You can use a wrench to make sure each nut is properly tightened.
Finally, once the nuts are in place, position the toilet seat over the toilet rim so that it is centered and tighten the bolts. Make sure the bolts are tight enough, but not overly tight. Once the bolts are in place, replace the caps and secure them in place.
And there you have it! Tightening a toilet seat on a toilet is a quick, two-step process. All you need is a few basic tools, and you can easily get your toilet seat secured and ready for use again.
Can you over tighten bolts on toilet?
Yes, you can over-tighten bolts on a toilet. Doing so puts extra strain on the bolt and can cause it to break or become loose over time. Over-tightening can also damage the gasket or put added stress on the toilet bowl, leading to possible cracks or leaks.
When tightening bolts on a toilet, stop when the nut is flush with the bottom of the bolt. Do not tighten it too much, as that can cause problems later. Make sure to use the proper tools, as well, as too much torque can cause the bolts to break.
Why does my toilet seat moves when I sit on it?
Your toilet seat most likely moves when you sit on it because of poor installation. If a toilet seat hasn’t been properly secured to the toilet, it can be susceptible to shifting and moving. When you put weight on the toilet seat, it is not firmly fixed in place and shifts as a result.
Another potential source of diagnostic trouble is that the hinges that connect the seat to the bowl are loose. The hinges ensure the seat is fixed firmly in place, but if they have not been tightened properly, the seat can move when in use.
In most cases, stabilizing a shifting toilet seat is a simple DIY project. To begin, use an adjustable wrench to firmly tighten the bolts that secure the seat to the bowl. After that, apply Teflon tape to the screws that secure the hinges to the bowl, then tighten them securely.
If the problem persists, it may mean that the existing seat is too old and unstable to secure. If this is the case, you may need to purchase a new toilet seat and bolts or hinges in order to achieve a secure fit.
Should you caulk around a toilet?
Yes, it is important to caulk around a toilet. Caulking is applied to create a watertight seal and protect the floor from moisture. A toilet can leak from the base, and if there is no caulk applied, the moisture from the leak can cause the floor to rot or mildew.
Additionally, caulking around a toilet can reduce the amount of air that will escape through the crevices and reduce your energy bills. To protect your home and your wallet, it is best to use a high-quality caulk that is resistant to mold and mildew.
Applying the caulk is a relatively straight-forward process, and you can find detailed instructions online. It is important to make sure that all of the crevices are sealed properly, as moisture can still seep in and create problems if the caulk isn’t applied correctly.
Why wont the screws on my toilet seat tighten?
This could be due to one of several reasons. The first likely cause is that the bolts that are used to secure the seat to the toilet are too short. In order to ensure a secure fit, it is important that the screws reach through both the seat and the toilet.
If the screws are too short, they will not be able to adequately fasten the seat in place.
A second possible cause could be that the threads on the bolts are worn or damaged from repeated loosening and tightening. Corroded screws can also prevent a tight fit. To replace worn bolt threads, the old screws must first be removed.
After unscrewing the bolts from the seat, the threads can be inspected and, if necessary, replaced with new screws.
Finally, if the toilet seat is made of thick material, the threads may not be long enough for the screws to extend far enough into the seat. Replacing the seat with a thinner version may solve the problem.
In summary, there could be several causes behind why the screws on your toilet seat will not tighten. To resolve the issue, it is important to check the bolts, the toilet seat material, and the screws for wear, replace any necessary parts and then retighten the screws as needed.
How do you fix a wobbly toilet seat?
To fix a wobbly toilet seat, you will need to start by turning off the water supply to the toilet by turning the shut-off valve. Next, you will want to remove the screws that secure the seat and the hinges to the toilet bowl.
Once the screws are removed, you will be able to lift the seat off the bowl. Check the condition of the hinges and seats and replace any of the parts that are broken. If the seat and the hinges are still in good condition, check the fasteners to be sure they are properly tightened and secure.
You will likely have to use a screwdriver or a wrench to tighten these. Once the seat and the hinges are secured, turn the water to the toilet back on and reattach the seat and hinges. Finally, check them to make sure they are completely secure, and the toilet seat is no longer wobbly.
Is there a special tool to tighten toilet seat?
Yes, there is a specialized tool for tightening a toilet seat, also known as a “toilet seat tightening kit. ” This kit typically includes a set of bolts, washers, and nuts, as well as a wrench that is specially designed to fit over the bolts, making it easy to tighten the toilet seat without having to use a regular tool set.
Many of these kits are designed to fit a variety of toilet types, so it is important to ensure that you purchase the correct kit for your specific toilet. Additionally, they are relatively inexpensive and can typically be found at most home improvement stores.
What are the different types of toilet seat fittings?
There are typically three types of toilet seat fittings: bolt-on, snap-on, and click-on.
Bolt-on fittings involve mounting the toilet seat using bolts that pass through the hinges of the seat and into the base. This is the most secure type of fitting and is recommended for households with children or elderly people, as it eliminates the chance of a loose seat.
Snap-on fittings involve connecting the toilet seat to the base using plastic, metal, or wood screws. While this is the quickest and easiest way to fit a toilet seat, it can be prone to coming loose over time.
Finally, click-on fittings involve snapping the toilet seat onto the base. This is the simplest type of fitting and requires the least amount of effort and time, but it is also the least secure and should not be used in a home with children or elderly people.
No matter what type of fitting you choose, be sure to use the correct tools and procedure to ensure a secure fit.
Should the toilet seat be up or down while pooping?
The debate over whether the toilet seat should stay up or down while pooping is certainly not a new one, and there is no definitive answer to whether the seat should be up or down. People seem to have strongly divided opinions on this issue.
There are pros and cons to leaving the toilet seat in either position. Those who prefer to leave the seat up often say that it’s a bit cleaner, as it’s easier for someone to clean the seat top afterward.
Others feel that since it’s generally men who are the main poopers in a household, it’s more considerate to leave the seat up just to minimize the area that guys have to aim at.
On the flip side, those who prefer to leave the seat down often feel that it prevents the seat from being splashed with urine. It’s also much more convenient for a person who is done using the restroom to quickly and easily put the seat in the down position regardless of gender.
In the end, there really isn’t a right or wrong answer – this is a personal preference that is better left to the discretion of every household.
Why you shouldn’t flush the toilet with the seat up?
Flushing the toilet with the seat up can cause a multitude of issues. It can cause a messy splash of water to sprays in and around the bathroom, including on any clothes, towels and toiletries that are nearby.
Additionally, it can create unpleasant odors from the waste particles and bacteria that become airborne when the toilet is flushed with the lid up. This can create a hazardous environment, particularly in public restrooms where it could lead to higher risks of spread of communicable and infectious diseases.
Also, in the event of a plumbing issue in the restroom, having the seat up renders the toilet bowl inaccessible, which can make repairs and maintenance difficult or even impossible. Leaving the seat down is an important preventative measure that helps conserve water and reduce the potential for mess and diseases.
Should a toilet sit flat on the floor?
Generally speaking, it is best for a toilet to sit flat on the floor to ensure adequate support and stability. Poor installation of a toilet can result in leaks, low water flow, and other maintenance issues.
In order to ensure these issues are avoided, it’s important to install the toilet properly, which means making sure it sits flat on the floor and is anchored to the floor securely. Brackets that hold the toilet in place should be purchased and attached for extra support and to ensure the toilet won’t move or come loose from the floor.
Additionally, it’s important to use extra sealant and caulking around the base of the toilet to create a watertight seal. This prevents leaks and helps optimize toilet performance. Taking the necessary steps to ensure your toilet sits flat on the floor can help protect the performance of your toilet and prevent costly repairs.
Does closing the toilet lid help Mythbusters?
Closing the toilet lid while flushing is not likely to help the Mythbusters team in any meaningful way. In fact, there are several myths involving toilet lids, how they affect flushing performance, and if they can help reduce the spread of germs.
Despite some of these myths circulating online, most are dispelled after testing and examining the scientific evidence. In a nutshell, tests have proven that closing or leaving the toilet lid open while flushing does not significantly affect either the force or the volume of water used by the toilet.
Additionally, with newer low-flow toilets, closing the lid is not necessary for optimum flushing performance. However, one time when closing the toilet lid can help the Mythbusters team is when they are testing a myth related to germs, like if toilet lids can truly prevent the spread of germs from toilet back-splash.
In that particular instance, closing the lid can help keep any germs from splashing out of the bowl and onto team members.