The on/off switch on a Whirlpool ice maker is typically located near the lower front of the unit, on the side or bottom panel. It is typically a small black switch or knob. Turning the switch off cuts power to the ice maker and stops the production of ice.
When turning the ice maker back on, it may take several minutes for the ice bin to fill with ice again. For added safety and convenience, some models may also feature a reset button to restart the unit if it becomes unresponsive.
Where is the ice maker switch located?
The location of the ice maker switch will depend on the type of refrigerator you have. In most side-by-side and French door refrigerators, the ice maker switch is typically located in the fresh food compartment, toward the top or on the ceiling.
In top-freezer refrigerators, it can be found at the back wall of the freezer section. In old-style refrigerator-freezers, you may need to remove the ‘front kick plate’ to find the switch. If your refrigerator has an icemaker but no switch, it may be controlled by a wiring harness that connects to a main circuit board.
How do I know if my ice maker switch is on or off?
To determine if your ice maker switch is on or off, you will need to locate it first. Depending on the make and model of your refrigerator, it could be located in a variety of places. It could be behind the ice maker itself, in the back of the refrigerator near the compressor, or near the control panel.
If you are having difficulty locating the switch, you can consult your refrigerator’s user manual.
Once you have located the ice maker switch, you can check to see if it is on or off. It should be clearly labeled “on” or “off”, so all you need to do is take a look. If the switch is in the “on” position, your ice maker will be producing ice.
If the switch is in the “off” position, your ice maker will be turned off and will not be producing ice.
If you find that your ice maker switch is off and you want to turn it on, simply switch the switch to the “on” position and then close the refrigerator door. This will allow your ice maker to start producing ice.
Do all Whirlpool ice makers have a reset button?
No, not all Whirlpool ice makers have a reset button. Depending on the model, some may have a reset button, while others may not. Any Whirlpool model that offers a self diagnostic system may also offer a reset option.
Some of the newer icemakers offer a diagnosis system, while some of the older models do not. The best way to determine if your specific model has a reset option is to refer to your user guide or, if you still can’t find the answer, contact a company representative.
Alternatively, you can arrange for service and repair with a certified Whirlpool technician, who will be able to access any reset options that may be available.
How do I turn my ice maker back on?
To turn the ice maker back on, you will need to locate the “on/off” switch or selector switch located on the back of the freezer. This switch will control the cycle of the ice maker. Depending on the type of refrigerator you have, the switch may be a simple toggle switch, a rotary dial, or a digital user interface.
Once you’ve located the switch, make sure that it is in the “on” position. On a toggle switch, make sure the switch is pushed inwards to indicate it’s on. On a rotary dial, make sure that the dial is lined up with the indicator indicating “on.
” If you have a digital user interface, you will need to make sure that the appropriate settings are enabled.
Once the switch is in the “on” position, you will need to wait a few hours for the cycle to begin. The amount of time it takes varies depending on the type of refrigerator and the ambient temperature, but you should expect it to take anywhere from a few minutes to a couple of hours.
Once the ice maker has cycled through, it should begin producing ice. If you don’t see any ice production, check the switch again to make sure it’s in the “on” position and give it a few more hours. If it still isn’t producing ice, then you may need to consult your refrigerator’s user manual or contact a qualified technician for assistance.
Where is reset button on icemaker?
The reset button on an icemaker can typically be found underneath, or on the side or back, of the device. On many models, the reset button can be located inside a control panel that requires undoing several screws before the reset button can be accessed.
It may also be necessary to remove an access panel, which is typically done by removing a few screws. Once this is done, the reset button should be visible. Depending on the model of the icemaker, resetting the device may involve pressing the button for a few seconds or pushing it several times.
Additionally, the location of the reset button may be indicated in the user manual for the icemaker.
Does unplugging a refrigerator reset the ice maker?
No, unplugging a refrigerator will not reset the ice maker. While unplugging a refrigerator will reset any settings and erase any errors, it will not reset the ice maker. The ice maker should be reset manually by pressing the on/off button or by rotating the ice maker’s shut-off arm to the on position.
If the ice maker is not reset manually, the ice maker will not produce any ice. It is also important to check the water supply and make sure the water filter, if there is one, is not clogged before trying to reset the ice maker.
If the ice maker still doesn’t work after all these steps, then service may be needed.
Where is my ice maker reset button?
The location of the ice maker reset button can vary depending on the type of ice maker unit you have. On some units, the reset button is located on the back or side of the appliance and must be pushed with either a pen or paperclip.
It may also be located behind the kick plate located at the bottom of the appliance, or tucked away on the left or right side of the appliance. Additionally, some ice maker units may have a button on the user interface, accessible by pushing the “Select” or “Settings” button until the ice maker option appears.
If unable to locate the reset button, you can refer to your owner’s manual or contact the manufacturer directly for help.