An Equibase speed figure is a number rating for a racehorse’s performance, devised by the Equibase Company LLC to rate a horse’s performance in a race. The Equibase speed figure is a number from 0 up to about a 140 or so, and they’re calculated according to a formula that takes into account the time, the final position of the horse, the race distance, and the track condition.
Generally, a higher figure means the horse ran faster than an average performance, while a lower figure means the horse ran slower than an average race. The speed figure accounts for some variance between races and track conditions, so that a horse that ran at 10 furlongs at Aqueduct may still receive a comparable speed figure to one that ran at six furlongs at Belmont Park.
Speed figures are often used by handicappers, trainers, and other racing analysts to compare performances, evaluate past races and make predictions on future ones.
What is a good speed figure for a horse?
A good speed figure for a horse will depend on the particular race that the horse is running in and the type of race. As a general rule of thumb, a good speed figure for a Thoroughbred horse is generally considered to be in the mid to high 90s.
This figure would be based off of the horse’s performance in the past and various calculations of the race’s past performances. A horse that consistently performs in the 90s and higher would generally be considered a solid racehorse.
Also, if the race is a longer distance, a horse with a higher speed figure will be favored since they will have more endurance and strength over a longer period of time. Additionally, the speed figure should be taken into account in combination with other factors, such as the course and the type of race, to get a good overall idea of how well a horse may perform.
How do you read speed figures in horse racing?
Reading speed figures in horse racing involves analyzing past race times of a horse to determine their ability and potential in the future. Speed figures measure the time it takes for a horse to run a certain distance and are recorded in units such as seconds per furlong (a sixteenth of a mile), class rating, and track variant.
As horses run the same courses, the speed figure is relative to the conditions of the track and each horse’s individual performance, making it an invaluable tool for handicapping.
The number of furlongs in a race will determine which speed figure to use. Shorter races use fractional speed figures, which measure the amount of time it takes for a horse to complete a furlong. Longer races use the two-turn or three-turn speed figure, which measures the time it takes for a horse to complete two or three furlongs of a race.
The class rating is a measure of a horse’s performance relative to the rest of its field and the track variant is a measure of how a horse does on that specific track, compared to its performances on other tracks.
When handicapping races, betting experts use speed figures as a baseline for choosing their wagers. Speed figures take into account a variety of factors that are not accounted for when using traditional handicapping methods.
As such, they can be a valuable tool to help predict performance in upcoming races, giving an edge to those who are familiar with the system.
How do you read timeform pace figures?
Reading timeform pace figures can be a bit tricky, but ultimately it is important to understand them in order to properly handicap races. Timeform pace figures are assigned a numerical weight that reflects the quality of a particular horse’s last performance.
The higher the number, the better the performance.
Typically, a horse’s pace figure will range from 0-100. Anything above 80 is considered highly impressive, while a 20 or lower is an indication that the horse’s performance was not up to par.
It’s also important to understand that Timeform pace figures aren’t just based on pure speed. They also take age, track condition, class (i. e. the grade of competition) and other factors into consideration.
If you are looking at a horse’s performance over a longer distance, then a higher pace figure might not be a good indication of the horse’s ability. For these races, a more accurate measure can be found by looking at the horse’s total time for the race, rather than just their pace figure.
Overall, the best way to learn how to accurately read Timeform pace figures is to look at previous races, do some research and get a feel for how the figures are calculated. With a little practice, soon you will be able to correctly identify potential winners based on their Timeform pace figures.
What is the speed rating chart?
The speed rating chart is a reference guide to help determine the speed capability of a tire. It provides a classification of the tire’s maximum safe speed based on its construction and materials, typically designated by a letter.
The higher the letter, the higher the speed capability. It is important to choose the right speed rating tire for the vehicle in order to meet the performance requirements of the vehicle, especially when exceeding its normal speed limits.
Speed ratings range from L (75 mph) to Y (186 mph), with each letter representing different maximum speeds. For example, an H-rated tire can handle sustained speeds of up to 130 mph and can make it through a quarter-mile in 16.
7 seconds, while a V-rated tire can handle sustained speeds of 149 mph and can make it through a quarter mile in 14. 8 seconds.
It is important to note that speed ratings do not indicate the maximum speed that a vehicle can travel nor do they guarantee the performance of the tire at its rated speed. The speed rating does not account for other factors such as under-inflation, improper balance/alignment, or overloading.
It is up to the driver to maintain their maximum speed based on the condition of their vehicle.
What are the 5 speeds of a horse?
The speed of a horse can vary greatly depending on the breed, experience, and type of terrain. Generally speaking, a horse’s speed is categorized into 5 roles based on the maximum speed they can reach.
Walk: A walk is the slowest form of travel and is a four-beat gait in which the hooves of the two legs on one side of the horse meet together. An average horse at a walk can reach speeds of up to 6 to 4 miles per hour (mph).
Trot: A trot can be described as a two-beat gait in which at least one foot of the horse is always on the ground. At a trot, a horse can reach speeds of 8 to 10 mph.
Canter/Lope: The canter, also known as the lope, is a three-beat gait in which the legs of the horse move in diagonal pairs and the horse can reach speeds of up to 12 mph.
Gallop: The fastest gait a horse can perform is the gallop. It is a four-beat gait in which the hind legs of the horse extend forward with each stride and the horse can reach speeds of up to 25 or even 30 mph.
Pace: The pace is a two-beat gait that is similar to the trot, but instead of the legs on each side of the horse moving passively, the opposite front and back legs move in rhythm together while the horse remains in a jog.
At a pace, a horse can reach speeds of roughly 7 to 12 mph.
What is a 14.2 hh horse?
A 14. 2 hh horse is a horse that stands 14 hands 2 inches high at the withers. This measurement is often used to classify horses of a certain size, with the “hh” representing the imperial measure of height in horses.
horses of this size are typically ridden by smaller or younger riders, or those in narrow or shallow disciplines such as show jumping or eventing. They tend to be versatile and agile, and can be powerful but obedient in their given discipline.
The 14. 2 hh horse is one of the most versatile sizes for a horse, and is also fairly common.
What horse has the highest speed index?
The title for the horse with the highest speed index is held by an elite group of horses. According to the American Quarter Horse Association, Drop The Hammer recorded the highest speed index of 132 when he competed in the Texas Classic Futurity in 2019.
Drop The Hammer, a three year old bay gelding, was bred and trained by Grammy nominated country music artist Wade Hayes. He was ridden by Raul Ramirez Jr. , who also holds the title for competing in the two highest speed index earned in the same race.
In second place for the highest speed index is Santa Gota Dash, who had a speed index of 131. Santa Gota Dash was also a three-year-old bay gelding and was ridden by Emilio Tapia.
The third highest speed index currently belong to Stolis Pro, who had a speed index of 130. Stolis Pro was a three-year-old sorrel gelding ridden by Johnny Trotter.
The fourth and fifth highest speed indexes belong to the horses Coronas First Jet and Heza Dashing Candyman, both with a speed index of 129. Coronas First Jet was ridden by Santos Carrizales, and Heza Dashing Candyman was ridden by Luis Vivanco.
These five horses currently hold the top five speed index titles, and are some of the fastest horses in the racing industry today.
What is Beyer Par?
Beyer Par is an approach to analyzing the performance of a horse derived from the methods first developed by prominent horse racing analyst Andrew Beyer. It centers around assigning a numerical figure to the quality of a horse’s performance and is primarily used to compare different races.
The approach assigns a figure to the horse’s performance factor, which represents the amount of effort the horse put in during the race, and the speed figure, which attempts to measure the actual speed of the horse during the race.
The performance factor is used to award points for a fraction of a length for every position of a horse behind the first-place finisher. After assigning points to each horse, the speed figure is used to assign a numerical value that corresponds to a particular performance range.
The final Beyer Par value is calculated by adding the performance factor and the speed figure together, and comparing the figure to a predetermined chart. This approach gives an objective measurement in comparison to the more subjective speed ratings used by trainers and jockeys.
By comparing races analyzed with Beyer Par values, performance trends of horses and tracks can emerge.
Is 30 mph fast for a horse?
That depends on the context. A horse can easily reach speeds of 30 mph, and horses that are bred for racing can travel much faster. However, a horse’s average walking speed is only 4 mph, so 30 mph could be considered fast for a horse that is not trained for racing.
For example, 30 mph might be too fast for an inexperienced rider to handle, and some horses may lack the proper training to safely and comfortably reach such speeds. Additionally, the health and physical condition of the horse can play an important role in determining its top speed.
Therefore, 30 mph could be considered fast for a horse depending on the horse’s experience, training, and physical condition.