When replacing a toilet, you need to measure several components of the space so you can choose the most appropriate model for the project. Before you make a purchase, measure the following items:
1. Distance from the wall to the bolts that secure the toilet: the bolts should be no more than 12″ from the wall; if they’re farther out, you’ll need an extended flange to install the new toilet.
2. Distance diagonally between the bolts: this measurement will help you determine the correct toilet bowl length.
3. Distance from the floor to the bolts: this will also influence which length is most suitable for your toilet bowl.
4. Distance from the wall to the back of the tank: check this measurement to ensure the new tank will fit in the allotted space.
5. Width of the closet flange: if the closet flange is wider than the recommended size, you will need an extension flange to fit the new toilet.
Having these measurements will give you the information you need to choose the most appropriate toilet for the job. Make sure to also measure the drainage pipe and waste water lines to ensure compatibility when you’re ready to perform the installation.
What are the measurements for installing a toilet?
The measurements for installing a toilet typically depend on the size of the bathroom and where the toilet is located. Generally, a toilet is designed to be installed at least 15 inches away from the wall, and the overall space required around the toilet needs to be at least 21 inches.
In terms of the height of the toilet, the rim of standard toilets should be measured to be no more than 15 inches above the finished floor. In addition, the distance from the middle of the toilet to the center of the closest bath fixture should be no less than 24 inches.
When installing a toilet, the waste line from the toilet should be connected to a trap which is at least 6 inches in diameter and at least 18 inches in length. Lastly, the water line for the toilet should be three-quarters of an inch in diameter and lead up to the wall mounted fill valve.
Can you replace a toilet with any size toilet?
No, you cannot typically replace a toilet with any size toilet. Toilets come in a variety of sizes and types, but most household toilets typically measure 12 inches from the wall to the bolts. That is considered a “standard” toilet size and it is what most toilets are designed for.
This means that when you replace a toilet, you will usually have to use one that is the same size or slightly larger. Attempting to replace a toilet with one that is significantly larger or smaller can cause problems with the connections and the installation.
In some cases, you may need to make structural changes, such as altering the pipes or framing, to accommodate a larger toilet, or you may need to adjust the floor to make sure the bowl is securely installed.
So, before replacing a toilet, it is best to check and make sure that the toilet you plan to install is the same size or slightly larger than the current toilet.
How do I know if my toilet is 10 or 12?
If you’re trying to determine what size your toilet is, you can start by measuring the rough-in which is the distance from the finished wall behind the toilet to the center of the waste line. If the rough-in is 10 inches, then your toilet size is 10.
If the rough-in is 12 inches, then your toilet size would be 12.
In addition to measuring the rough-in, you can also look at the toilet itself to try and determine the size. For instance, look for a manufacturer’s logo, a stamp, or an identification number which could provide an indication to the size.
Other indicators might include the shape or some of the features the toilet has, such as the size and location of the flush button.
If you still can’t determine the size of your toilet, you may be able to find the size in your homeowner’s manual, or by calling the manufacturer for more information.
Are all toilets 12 inches from wall?
No, not all toilets are 12 inches from the wall. Toilet rough-ins refer to the distance from the wall to the center of the waste pipe, and they range from 8 inches to 14 inches on average. Toilet placement when planning the installation is an important consideration and should take all relevant measurements into account.
The purpose of having a consistent toilet rough-in is to make it easier to buy any standard toilet and fit it into any standard alcove, without having to make major modifications. If a toilet that is not compatible with the rough-in is installed, it could lead to costly repairs and possible water damage.
What does 12-inch rough-in mean when installing a toilet?
12-inch rough-in when installing a toilet typically refers to the distance from the wall behind the toilet to the center of the waste pipe that the toilet is connected to. This is important for buying the correct toilet because a 12-inch rough-in means that you need to purchase a toilet that has a 12-inch rough-in.
If the rough-in is too small (say 10-inches) and you purchase a toilet with a 12-inch rough-in, then the toilet will not fit properly. Also, the distance from the wall should be measured from the finished surface to make sure you get the precise measurement so that you purchase the right size toilet.
When measuring, keep the finished wall surface of the toilet in mind and measure from the top of the finished surface to the center of the waste pipe. This will help you determine the proper size toilet to purchase and ensure proper installation.
How many inches is required on each side of a toilet?
Typically, it is recommended that a toilet have a minimum of 15 inches of space on either side and a minimum of 30 inches of space in front of it. It is important to consider the various types of bathroom accessibility standards when installing a toilet.
For example, if the user is wheelchair-bound, it may require additional space to allow enough room for a wheelchair to maneuver. Additionally, many people require a grab bar, toilet armrest or raised toilet seat, which can all require additional space for installation.
In general, it is best to give yourself as much room as possible to ensure comfort and accessibility.
Do all toilets fit the same hole?
No, not all toilets fit the same hole. Toilets come in a variety of sizes and shapes and will require varying sized holes in the floor for installation. Some toilets use a standard 12” rough in, where some compact toilets or wall-mounted toilets require much smaller rough ins.
Additionally, some toilets require a specialized rough-in since the waste line is offset from the back of the bowl. It’s important to measure the dimensions and shape of your current toilet to ensure that the new one you choose will fit the same hole.
What is a fair price for replacing a toilet?
The cost of replacing a toilet will depend on a several factors. It generally costs around $200 to $1000 to replace a simple two-piece toilet, while a one-piece specialty toilet will cost a bit more.
Other considerations should be taken into account when it comes to a replacing a toilet such as the toilet itself, installation labor, and additional components. The toilet itself can range in price from $50 to $1500 or more, depending on the make, model, and design of the toilet.
Installation labor generally costs between $90 and $240, sometimes more. Additional components such as wax rings, additional closet bolts, and a toilet seat can cost between $10 and $150. All of these factors combined can give you a better idea of the overall cost of replacing a toilet.
How long does it take a professional to replace a toilet?
Replacing a toilet typically takes a professional between 1-2 hours. This, however, is assuming that the model of the toilet is the same as the current existing one and that all of the necessary tools and materials are present.
If the existing toilet has to be removed first, that could add an additional 30 minutes to the job. Additional time may be required if the flange has to be repaired or if a new water line or drainage pipe needs to be added to the toilet.
Additionally, if the professional requires additional materials, like wax rings, a shut-off valve, or a supply line, this could increase the job’s estimated completion time.
Should I replace a 20 year old toilet?
Ultimately, the decision whether to replace a 20 year old toilet lies with the homeowner. If the toilet is still functioning, it might make more sense to simply repair it instead. However, if the toilet is no longer functioning properly or is no longer aesthetically pleasing, or if additional plumbing or remodeling of the bathroom is planned, then replacing the toilet may be a wise decision.
Replacing a 20 year old toilet with a modern toilet could help to save on energy and water costs. Modern toilets are designed to be more energy and water efficient, so replacing an older toilet with a newer model that is designed with those features could result in significant cost-savings.
Additionally, a new toilet can greatly improve the look of a bathroom, both in terms of aesthetics and comfort. If considering replacing a 20 year old toilet, it is a good idea to consult a certified plumber to determine which type of toilet would best suit one’s needs.
How much does Home Depot charge for installing a toilet?
The cost of installation for a toilet at Home Depot depends on a variety of factors, including the type of toilet, any related services, and where you live. The pricing for a basic installation starts at approximately $129 and may increase depending on the scope of work.
If you choose to have extra services completed, such as a rough-in or the removal of an existing toilet, additional costs may be added. The cost of installation may also vary depending on the region where you live and the local cost of labor.
To get the most accurate pricing information, contact your local Home Depot and ask for a free in-home consultation. The store’s installation services team will provide you with a precise quote based on the services, materials, and other factors related to your project.
Is it worth it to replace old toilet?
Yes, it is often worth it to replace an old toilet. Replacing an old toilet is a great way to improve both the functionality and the look of your bathroom, while also potentially saving money on water usage.
Including increased water efficiency and potential savings of hundreds of dollars on utility bills. Newer models use less water per flush, saving you money on your water bill each month. Additionally, new toilets often include features such as more height, a curved design to enhance comfort, and improved flushing technology.
From a design perspective, a new toilet can add a more modern feel to a bathroom. Investing in a new model can give you peace of mind that your toilet is running in top condition, and the potential savings on your monthly water bill make the purchase worth it.
How do you tell if a toilet is a 10 inch rough?
The rough-in measurement of a toilet is the distance from the bathroom wall to the center of the closet flange. To determine the rough-in, you will need to measure from the bathroom wall to the center of the closet flange.
Most commonly available 10 inch rough-in toilets will have an overall width of 28 1/2 inches. Toilet models that come with a 10 inch rough-in measurement are typically specified on the packaging. You can also find many toilet brands that offer bowl configurations and flanges that are designed for 10 inch rough-in measurement.
Some of these models may also feature adjustable flanges, which can be adjusted to accommodate for 10 inch rough-in measurements. When measuring for a 10 inch rough-in toilet, it is important to measure from the wall to the center of the flange so that you can accurately identify a 10 inch rough toilet.
What is the difference between a 10 inch and 12-inch toilet?
The primary difference between a 10 inch and 12-inch toilet is the distance from the wall to the toilet when installed. Typically, a 10-inch toilet requires about a 10-inch rough-in (distance from the wall to the center of the waste outlet) and the 12-inch toilet requires a 12-inch rough-in.
The 10-inch model is most commonly found in bathrooms with limited space as it takes up less room overall and it’s also slightly less expensive. The 12-inch model is more widely available as they are generally used in larger bathrooms with more space, but they also require more space to install due to their larger size.
Other factors to consider when choosing between a 10 inch and 12-inch toilet are the water capacity, water use, design, and likely the most important, comfort. As the 10-inch toilets generally hold less water, they use less water per flush than the 12-inch models and generally have less power and a slower flush, so it can take longer to clear the toilet bowl.
The 12-inch models use more water per flush and are usually more powerful, so they can clear the bowl faster. The design of the toilet bowl and seat also changes depending on the size of the toilet, so it’s important to consider the overall look and feel that best suits your tastes.
Finally, seat height and bowl depth are much more important if comfort is a major consideration; the 10-inch model is lower to the ground, while the 12-inch model is taller and with a deeper bowl.