Installing a wall-mounted toilet may seem daunting, but it’s actually quite easy with the right tools. Here are the steps to take:
1. Gather the materials you need:
A wall-mounted toilet, the mounting bolts, anchor bolts, a wax ring, a mounting bracket, a supply line and a flush valve. Also, have a Phillips head screwdriver, a level, a putty knife and a drill with bits on hand.
2. Place the Wall Bracket:
First you’ll need to locate where you want the toilet to be placed, then mark out the location on the wall. It should be at least 15 inches from the center of the drain pipe to the center of the bowl; when you’ve placed the bracket, drill the necessary holes, add the anchor bolts and secure the bracket to the wall.
3. Place the Toilet Bowl:
On a level ground, position the toilet bowl directly underneath the wall bracket. Carefully slide it until the back of the bowl is flush with the wall; then use the mounting bolts to secure the bowl.
4. Connect the Supply Line:
Connect one end of the supply line to the flush valve and the other end to the supplied tee fitting.
5. Install the Wax Ring:
Place the wax ring on the flange of the toilet bowl.
6. Secure the Toilet:
Carefully slide the toilet up to the wall, making sure it aligns properly with the wall bracket. Use the mounting bolts to secure the toilet.
7. Connect the Flush Valve:
Secure the flush valve to the wall and supply line, making sure the toilet drains properly.
8. Test the Toilet:
Turn on the water supply and test the toilet for proper functioning.
And that’s it! With the right tools, installing a wall-mounted toilet is a relatively simple process.
What are the disadvantages of wall-mounted toilet?
One of the major disadvantages of wall-mounted toilets is their cost. These types of toilets are significantly more expensive than traditional floor-mounted ones due to the additional labor and materials required for their installation.
They also require careful placement in order to hide the plumbing and wiring, so a bit of remodeling may need to be done to ensure that the finished product looks neat and clean.
Another disadvantage of wall-mounted toilets is that they are often not well-suited to smaller bathrooms. These types of toilets take up less room than a traditional floor-mounted one but they can still take up valuable floor space in a smaller bathroom.
Additionally, the plumbing and wiring placement may limit the options for vanity and sink placement, making it difficult to design a usable layout within the given space.
Wall-mounted toilets may also pose a safety issue if they are not installed properly. These units are typically attached directly to the wall so if the bolts are not secured tightly, the toilet may move or even become detached from the wall.
This could cause serious injury if someone is using the toilet at the time. To avoid this, it is important to have the toilet installed by a licensed professional who can ensure that it is properly secured.
Are wall-mounted toilets more expensive to install?
Yes, wall-mounted toilets tend to be more expensive to install than traditional floor-mounted models. This is because they require additional hardware and labour to install, often requiring additional pipes and wall reinforcements.
Additionally, wall-mounted toilets can be more expensive as the cost for these models tend to be higher compared to traditional bowl-shaped models. In some cases, wall-mounted toilets can cost up to twice as much as the traditional bowl-shaped model.
The cost of installation also depends on the make and model you choose and the complexity of installation. Wall-mounted toilets often must be professionally installed, making the overall cost higher than with traditional toilets.
In most cases, wall-mounted toilets are more expensive to install than traditional floor-mounted toilets, but they offer a sleeker, more modern look and can add a touch of luxury to any bathroom. So if you’re looking to make a statement, a wall-mounted toilet might be the right choice for you.
Are wall-hung toilets practical?
Yes, wall-hung toilets can be a practical solution for many households. They require little floor space which makes them ideally suited for smaller bathrooms, and their elevated design provides a modern aesthetic and improved function.
Wall-hung toilets often have fewer problems with clogs because of their higher water level and because the water connections and waste pipes are concealed and therefore easier to maintain. Additionally, they look sleek and can help you create a distinctive look for your bathroom.
Finally, as wall-hung toilets are typically set within the wall, even if you move your furniture around, the toilet remains exactly where you placed it; no more worries about misaligned toilets or broken wax seals.
All in all, a wall-hung toilet is a great choice for those looking for practicality, space-savings, and style.
Can wall hung toilet break?
Yes, wall hung toilets can break. Like any fixture, they are subject to the normal wear and tear that happens over time. Additionally, wall hung toilets can be more susceptible to breaking due to their design placing most of the weight of the toilet on a single mounting point in the wall.
Rough use or improper installation can make them more likely to break. Damage to the underlying wall structure can also occur if the mounting point pulls away from the wall. If your wall hung toilet is already showing signs of wear and tear or is installed incorrectly, it is best to call a professional plumber to inspect and repair it.
Is there a weight limit for wall hung toilets?
Yes, the weight limit for wall-hung toilets varies depending on the specific model. Generally, most wall-hung toilets have a weight limit of 350 pounds. However, some models have weight limits up to 400 pounds.
It is important to note that the weight limit of the toilet should not be exceeded, as this could result in structural damage to the wall and potentially cause a safety hazard. If you are unsure what the weight limit is for your specific toilet model, you should consult the instruction manual or contact the manufacturer.
Taking the time to verify the weight limit could save you time, money, and potential damage in the long run.
Do you need a professional to install a toilet?
Yes, it is usually recommended to hire a professional to install a toilet. Installing a toilet is a job that requires knowledge of plumbing systems, and even small mistakes can cause major problems. If a toilet is not properly installed, it can lead to clogging, leaks, and other water damage.
Professionals have the experience and the correct tools to make sure the job is done correctly. Moreover, professional plumbers can detect hidden problems such as old pipes or weak foundations in the floor that can make it difficult to install a toilet.
Additionally, they can make sure the sewer line is not damaged or blocked. Hiring a qualified plumber is the best way to ensure that the toilet is correctly installed and any potential problems are addressed.
Which type of toilet is for health?
The most hygienic and healthy type of toilet is the pressure-assisted toilet. This type of toilet uses a combination of air and water pressure to ensure a strong and efficient flush. The water pressure helps to wash away waste deeply and with force, so that the bowl is thoroughly cleansed and the toilet functions at an optimal level.
The air pressure helps the tank to refill quickly, so that the toilet is available for use shortly after flushing. Pressure-assisted toilets are often a better choice than gravity-operated toilets, as they are considerably more efficient, less noisy, and deposit less water waste into the environment.
How do I stop my wall-mounted toilet from leaking?
If your wall-mounted toilet is leaking, the most important thing is to figure out the source of the leak. Inspect the cistern, the connecting hoses and the pipe for any visible signs of leaking, such as dripping water or any visible cracks.
If the leak appears to be coming from the cistern, check the flushing flush valve, fill valve and gaskets for any potential issues. If the leak appears to be coming from the connecting hoses or pipe, consider replacing the hoses and replacing the sealant around the fittings to ensure a tight connection.
Additionally, it is also important to ensure that the toilet is mounted correctly and that the bolt has been tightened securely. Finally, if the problem persists, it may be necessary to replace the entire cistern.
What is the difference between wall faced and back to wall toilets?
Wall faced toilets feature a pan connected to a cistern that is fixed to the wall. The cistern is usually partially or fully concealed by a brick wall. The toilet seat is the only visible element, making it very neat and good-looking from the front.
The cistern has a pressure system inside, which flushes the water rapidly with one push on the button.
Back to wall toilets, on the other hand, are designed in such a way that the pan and the cistern are hidden behind a wall, giving a bathroom a more streamlined look. The cistern is usually located on the wall, usually around the same level as the basin.
The flush button is usually placed in a convenient place away from the toilet seat, making it easy to flush the toilet. The cistern also features a dual or single flush mechanism to conserve water. Back to wall toilets are usually more expensive than wall faced toilets, but they offer a more aesthetically pleasing solution.
What height of toilet is for seniors?
The acceptable height for a toilet intended for seniors typically falls within the 17 – 19 inch range. The height should be slightly higher than a standard toilet seat ranging from 15 to 17 inches. This allows seniors to more easily sit down, with minimal strain on their legs, knees, and lower back.
It is important to ensure the toilet height is appropriate for the user, as many seniors suffering from age-related joints or muscle conditions can find it difficult to lower to a lower height. Other factors to consider when choosing a toilet intended for seniors include the shape of the bowl, as an elongated or comfort style bowl can better accommodate the user’s anatomy, as well as the type of toilet seat, as some have lids or arms for added support.
Additionally, it is important to make sure the toilet is mounted securely for added safety and stability.
Is a taller or shorter toilet better?
The answer to this question ultimately depends on personal preference and the user’s individual needs. Generally, a taller toilet is thought to be better because it is more comfortable and can help some users avoid ‘splashing’.
Taller toilets may also be easier to get on and off of for those who have difficulty bending down or getting up from lower toilets. Additionally, they allow users to get closer to the bowl and therefore reduce the chance of overshooting the bowl and making a mess.
On the other hand, shorter toilets are typically better for children and smaller individuals who may find taller toilets difficult to use. They are also often considered more aesthetically pleasing in certain environments.
The best advice for someone deciding between a taller or shorter toilet is to consider their own preference and needs. If comfort is a primary concern, it may be best to opt for a taller option, whereas if aesthetics are more important, then a shorter toilet might be the better choice.
Ultimately, it is important for all users to feel comfortable and safe in their environment, so it is helpful to take the time to make sure that the toilet is the right size for them.
Are round or oval toilets better?
The answer as to which type of toilet shape is better, round or oval, really depends on the individual needs and preferences of the user. Rounds are the classic bathroom staple and are typically less expensive than ovals.
This makes them a great option for those on a budget. Rounds are said to be easier on the knees and provide a better fit for smaller bathrooms. Additionally, they often come in shallow varieties that may be ideal for space-constrained settings where the only room to install a toilet is confined.
Ovals, on the other hand, provide greater comfort and ergonomics because of their elongated shape. They also have the benefit of having a larger bowl, which can be beneficial for those with bulky waste.
Plus, since most models have a more generous seat, oversized users typically feel more comfortable on this type of toilet. In the end, it comes down to personal choice, but both types have advantages and improvements to suit various bathroom settings.
Do wall-mounted toilets leak?
Yes, wall-mounted toilets can leak, just like any type of toilet. The most common causes of leakage from wall-mounted toilets are from faulty or worn-out flapper valves, water-supply valves, toilet tanks, and other sealants in the system.
Improperly sealed toilet tanks can lead to water leakage, as can an aged or misaligned flapper valve. Poor installation can also lead to water leaks, as can wear and tear of tank parts. In order to avoid any problems, it is important to regularly inspect and maintain your wall-mounted toilets to ensure that all components are functioning correctly.
If any issues are found, they should promptly be addressed.
What is the cheapest price to install a toilet?
The cheapest price to install a toilet will depend on several factors, such as the type of toilet, the materials required, and any additional services needed. If you’re doing a basic installation with a stock toilet, it can range from as low as $100 – $180 for parts and labor.
This includes shut-off valve, wax ring, flange bolts, water supply line, and holes for the bolts, and any other supplies needed. If you already have many of the needed materials, such as the flange and wax ring, the cost could be significantly lower.
Additional services, such as setting up a mounting line for the bowl, may raise the price a bit. It’s best to consult a professional to get an accurate estimate for your specific needs.