FlexStone has been designed to last. With proper care and maintenance both FlexStone’s wall and vertical surface systems can last for many years. FlexStone is made with a material designed to resist scratches, fading, and general wear and tear, so it can retain its look and shine for much longer than other wall and bath products.
With proper cleaning and scheduled maintenance, it is meant to provide a lifetime guarantee. Furthermore, FlexStone is covered with a 30-year limited residential and 10-year limited commercial warranty.
This means that, within these time frames, FlexStone will repair or replace components if needed due to manufacturing defects, with the exception of improper maintenance and/or misuse. Therefore, with proper care and maintenance, FlexStone can last for many years.
How do you clean FlexStone shower walls?
FlexStone shower walls are made of a granite-like material that is incredibly durable and easy to clean. To clean the walls, you’ll want to use a mild cleanser and damp microfiber cloth. Spray the cleanser onto the wall and gently wipe it away with the damp cloth.
Make sure you don’t use any abrasive cleanser, as this may scratch the surface. To disinfect, use a bleach solution of 1/2 cup bleach to one gallon of water. Spray it on the surface, leave it on for 10 minutes and then rinse with clean water.
Make sure to rinse any excess with clean water too, as the bleach solution can damage any metal fixtures if left on too long. To protect the finish of your FlexStone shower walls, it’s best to use a bathroom cleaner with a wax or silicone protectant in it.
This will provide an additional level of protection from soap scum and daily use. You can also apply a coat of wax finish to the walls every few months to keep them looking fresh and new.
What is FlexStone made from?
FlexStone is an innovative surface material made from acrylic resin and crushed quartz. It is a lightweight, non-porous material that is extremely durable and resistant to chips, cracks, and fading. It is made from a combination of resin, quartz and natural pigments that are reinforced with fiberglass mesh for added strength and durability.
FlexStone also features a revolutionary surface finish that creates a smooth, luxurious look that is luxurious and easy to clean. It is a superior choice for any surface area in the home and can be used for traditional or modern décor.
How durable is FlexStone?
FlexStone is incredibly durable, offering superior performance and longevity when compared to competing products. The FlexStone material is composed of high-performance acrylic and is highly resistant to staining, cracking, chipping, and scratching.
The flexible nature of FlexStone makes it ideal for any bathroom design project, providing superior resistance to water, heat, and chemicals. It also has excellent cleanability and its inherent flexibility limits stress to tile grout lines.
Its resistance to temperature changes, humidity, and water damage also make it ideal for a rigorous bathroom environment. FlexStone is lightweight and easy to install, yet it has superior strength that allows it to stand up against the everyday wear and tear associated with busy home bathrooms.
Overall, FlexStone has proven to be an incredibly durable and dependable material, which is why it has become the go-to material for homeowners and professionals alike.
Can FlexStone be repaired?
Yes, FlexStone can be repaired. FlexStone is a type of surface laminate material which is often used for countertops and other surfaces in both residential and commercial buildings. FlexStone is made of stone and resin and is known for its durability, but it can be damaged over time.
Repairing FlexStone surfaces involves sanding down the area, filling in any divots or marks, and then applying a special FlexStone adhesive. Once this is done, the surface will need to be sanded and buffed to a smooth finish.
Additionally, any cracks or chips can be filled in and the surface repainted to match the existing color. Repairing FlexStone is a process that is best left to the professionals to ensure the best results.
What is the most durable tub surround?
The most durable tub surround will depend on the material used. Generally, tile and stone are the most durable tub surround materials since they are water-, heat-, and stain-resistant. However, solid surface materials, such as acrylic and fiberglass, are also a popular option since they are durable and easy to maintain.
Additionally, they come in a variety of colors, styles, and textures so you can customize the look of your bathroom. Whichever material you choose, be sure to use a high-quality sealant to ensure your tub remains waterproof and can stand up to the wear and tear of daily life.
What is the longest lasting material for a bathtub?
Acrylic is the longest lasting material for a bathtub, as it is one of the most durable materials available. Acrylic bathtubs are designed to be scratch and crack-resistant, giving them a very long lifespan.
They also come in a variety of colors and textures, so you can find a design to fit any decorating style. Acrylic bathtubs are also easy to clean and maintain, as well as being relatively lightweight and easy to install.
They also have excellent heat retention, which means your water will stay hotter for longer and you won’t have to keep reheating it.
What bathtub material lasts the longest?
The type of bathtub material that lasts the longest is likely to depend on the specific conditions it will be exposed to. Generally speaking, tubs made of cast iron and acrylic are two of the most durable bathtub materials.
Cast iron is known for its strength, durability and its ability to withstand extreme temperatures. It also retains heat, which is an advantage for long, hot baths. Acrylic is much lighter than cast iron and is easier to install.
It is also highly resistant to scratches and wears over time and is available in a wide range of shapes and sizes. Both materials are easy to clean and will last a long time if they are cared for properly.
What’s the healthiest bathtub material?
The healthiest bathtub material is likely a strong, non-porous material such as acrylic, fiberglass, or diamond-reinforced acrylic. Acrylic is durable and non-porous, meaning it does not allow for the absorption of water, making it easy to clean and maintain.
Fiberglass is also non-porous and is a popular choice for bathtubs due to its durability. Diamond-reinforced acrylic is an even more durable material with the added strength of diamond particles mixed into the acrylic, making it a good choice for heavier users or larger tubs.
All of these materials are scratch- and heat-resistant, making them ideal options for the longevity and cleaning of the bathtub. While ceramic and porcelain are more traditional materials, their porous nature makes them difficult to maintain, as they can become stained and cracked more easily.
Can I install FlexStone over drywall?
Yes, you can install FlexStone over drywall. This can be done by attaching a piece of plywood of the same width as the FlexStone panels and attaching it over the drywall, providing a rigid and strong substrate.
This plywood layer should be affixed to the drywall with appropriate framing and fastening materials, such as construction adhesive and nails. Once the plywood is in place, the FlexStone panels can be measured and cut to size, with the panels then applied to the plywood with a flexible, mildew-resistant adhesive.
This installation method is suitable for both wall and shower applications. Additionally, wall preparation usually includes covering areas around tubs and showers with waterproof material to avoid moisture damage.
What tiles should not be used in a shower?
When installing a shower, it is important to select tiles that are suitable for wet environments, as moisture is a major concern in showers. Generally, it is recommended to avoid the following types of tiles when installing a shower:
Ceramic tiles – Ceramic tiles generally are not suitable for bathroom showers as they are not very durable and can crack or chip easily with repeated exposure to water or water vapor.
Glass tiles – While aesthetically pleasing, glass tiles can be very slippery when wet and should not be used on shower floors as a safety precaution.
Marble tiles – Natural stone tiles including marble should not be used in showers because they are porous, so water can easily seep into them, causing them to warp, crack, and stain over time.
Unsealed stone tiles – Stone tiles, such as travertine, limestone, or sandstone should not be used in showers unless they are properly sealed. Without sealing, these types of tiles can become very slippery when wet and can accumulate dirt and grime over time.
Wood tiles – Wooden tiles should not be used in showers because they are not waterproof or water resistant, so they will not hold up in a wet environment.
By avoiding these tiles, you can help ensure that your shower is installed correctly and will last for many years. Be sure to research proper installation methods and to use tiles suitable for wet environments in your shower.
What is the material to use for a shower floor?
The material to use for a shower floor depends on the style, function, and budget of the shower. Generally, ceramic, porcelain, and stone tiles are the most popular options for shower floors due to their durability and ability to keep moisture at bay.
Ceramic and porcelain tiles in a variety of colors, sizes, and shapes are often the least expensive option, and they can be the perfect choice for a smaller budget. Stone tiles, such as marble, granite, and limestone, can also provide an attractive and durable option, but they usually come with a higher price tag.
Additionally, grout is essential for any shower floor to protect the tiles from moisture, so it’s important to allocate a reasonable budget for this material as well. Lastly, non-slip surfaces can help prevent slips and falls and make the shower safer to use.
Non-slip surfaces are available for most of the materials described above and can be a great choice for those who want to prioritize safety.
What are cheap shower walls made of?
Cheap shower walls are typically made from either a plastic (acrylic) material or some type of composite material such as fiberglass or plastic laminate. Plastic materials are often used in the construction of shower walls because they are easily molded and are light weight.
Composite materials, such as fiberglass and plastic laminate, are also used because they are less expensive than solid-surface materials and are more durable than plastic. Fiberglass walls are typically covered with a gel coat that not only provides protection from scratching and wear, but also provides a finished look to the surface.
Additionally, plastic laminate can give off an elegant and modern feel to an otherwise bland look. Ultimately, the type of material used for a shower wall depends on the desired style and budget of the bathroom.
How do I know what material my shower is made of?
The simplest and most cost-effective method is to simply look at it. Most shower materials have a distinct look and feel. For example, tile showers may have bright, glossy tiles of various sizes and shapes, while cast iron showers have a smooth, matte finish.
If you’re still unsure after taking a look, a physical inspection can help provide more clues.
You can also examine the manufacturer specifications on your shower, which should provide information about its material. Many showers also have labels that indicate the material they are made of. This can be especially helpful if you’re trying to match replacement fixtures to existing ones.
Finally, if all else fails, you can have a professional come out and inspect the shower. They can detect the small differences that you may not be able to perceive and provide an accurate determination of the material it’s made from.
How can I redo my shower cheaply?
If you’re looking to redo your shower on a budget, there are a few ways to navigate the process. The most affordable option is to refinish and update your existing shower. This could mean replacing just the fixtures and handles, or a full reframing of the shower area and an upgrade to new ceramic tiles, sealers, and grout.
Refinishing your shower may require the help of a professional, but you can do some of the work yourself to save money. Start by removing the old fixtures, including the shower head and handles, and adding new ones.
Make sure to use a waterproof sealant between all parts to ensure a tight and secure fit.
Once your new fixtures are in place, you’ll want to refinish the walls and ceiling. Start by scrubbing away any mold or mildew with a mild cleaning solution, then flush out the drain and reseal it with epoxy sealant.
Once dry, you can add new paint and tiles around the edges.
For final touches, try using mosaic tiles around the edges, or apply a water-resistant sealant to protect against moisture and mould. With these simple steps, you can easily and affordably redo your shower on a budget.