Replacing a round toilet seat is a relatively simple process and can be done with minimal tools.
The first step is to purchase the same style and size of toilet seat, so check the label on the toilet or measure the size of the seat for accurate matching.
Next, turn off the water supply to the toilet. This is important so the toilet does not fill up with water when the tank is disconnected. Flush the toilet to release any remaining water in the tank.
Now remove the toilet seat from the toilet by unscrewing the two plastic nuts that secure the seat to the bowl. With the seat loose, gently lift it off.
Carefully remove any of the old mounting hardware, such as bolts and plastic caps, then discard it accordingly.
The new seat and hardware should come with illustrated instructions, so carefully read through and make sure you install it according to specific steps. You should also wear rubber gloves during the install to protect your hands from any residue.
If the type of seat you purchased came with two plastic or metal bolts, attach the bolts through the holes on the underside of the seat, then attach the seat to the bowl with the plastic nuts. Finally, once the seat is secured, trim any excess plastic to ensure the seat fits flush to the bowl.
Test the seat and make sure all the bolts are tight, but not too tight. Once you are satisfied, you have successfully replaced your round toilet seat.
Do all round toilet seats fit the same?
No, not all round toilet seats fit the same. Toilet seat sizes vary depending on the size of the toilet bowl, as a traditional round seat will measure 16. 5 inches in diameter, and an elongated seat measures 18 to 18.
5 inches. Additionally, the shape of the bowl varies across different toilet models and can cause toilet seats not to fit properly if the wrong seat is purchased for the toilet. This is why it is important to measure your toilet bowl before selecting a toilet seat to ensure that the seat conforms to the shape and size of your toilet bowl.
To help with the selection process, there are toilet seat measurement charts available online that allow you to easily compare the size of your toilet bowl and find the perfect fitting seat.
How do you remove a toilet seat cover with hidden fixings?
Removing a toilet seat cover with hidden fixings can be a tricky process, but with a few simple steps, it can be done successfully. The first step is to assess the toilet seat. Toilet seats with hidden fixings will have access points located on the underside of the seat.
Depending on the type and model of the toilet seat, these access points may have a cover or a cap that needs to be removed.
Once the access points are exposed, use a flat-head screwdriver to remove the screws. If necessary, an adjustable wrench can be used to loosen the screws. If the screws won’t come loose, there may be a glued-on ring that needs to be cut away.
A sharp knife or a utility knife can be used to carefully cut away the glue.
The next step is to remove the toilet seat. With the screws removed and the glue cut away, the seat should be able to be removed from the toilet bowl. Once the toilet seat is removed, inspect the fixings to make sure all of the screws and bolts have been removed, as well as any pieces of the glue that were cut away.
Finally, it is time to install the new toilet seat. Make sure the new seat fits securely and make any necessary adjustments. Then start the assortment process of screwing the seat back onto the toilet bowl.
Once the seat is secure, the job is complete.
How do I know which toilet seat will fit my toilet?
The best way to determine which toilet seat will fit your toilet is to measure the distance between the two bolt holes on the toilet bowl. Generally, there are three standard toilet seat sizes, depending on how far apart these two holes are from each other.
Types of toilet seats are:
Round toilet seat – the distance between bolt holes is about 5”
Elongated toilet seat – the distance between bolt holes is about 6”
Oversized/elongated seat – the distance between bolt holes is about 9”
If your toilet has two bolt holes in the front at a parallel distance of 5”, then it requires a round-shaped toilet seat. If the distance between these two holes is 6”, then you need an elongated seat.
And if this distance is even wider than 6”, then you will need to shop for an oversized/elongated seat.
An easy rule of thumb for toilet seat measurement is to sit down on the toilet and measure the distance from the middle of the forward-most bolt hole to the middle of the back-most bolt hole. This should give you the size of the toilet seat you should buy.
In addition to measuring the size of the seat needed, you should also consider the material and shape of the seat, as well as its installation type. Determine whether you want a solid or soft-close toilet seat, and make sure it is compatible with the type of toilet you have.
Many newer toilets have a Quick Release feature, which makes it easier to remove the seat. Also take into account the shape of the toilet seat; round, oblong, or other.
When you’ve determined the size and type of toilet seat that fits your needs, you can begin shopping for one, looking for one that fits your size, material, and installation requirements.
How do I know what kind of toilet seat I have?
Determining what kind of toilet seat you have can be easily done with a little detective work. First, measure the width and length of the toilet seat. Toilet seats are generally made to fit either a standard 12-inch rough-in or an elongated 14-inch rough-in.
The rough-in is the distance from the wall behind the toilet to the center of the closet flange (the bolt ring around the toilet drain opening). Once you’ve determined the rough-in dimension, look for the manufacturer’s name or logo on the toilet seat.
If you don’t see it on the seat itself, look for it on the back of the lid. This can help you to identify which brand of toilet seat you have. Additionally, check the bolts or screws located at the back of the seat and see the length of each.
If they are shorter than 1. 25 inches, then it’s most likely a round shape; otherwise, it’s probably an elongated toilet seat. If you can’t find any clear indicator on your toilet seat, take a picture and check with your local home improvement store or hardware store to narrow down the possibilities.
Why can’t I unscrew my toilet seat?
The first is that the bolts which connect the seat to the bowl may have become corroded or scratched, making them difficult to turn or remove. Another possibility is that the bolts have been over-tightened, making it difficult to loosen the seat.
If you think this might be the case, try using a wrench or pliers to get a better grip. Lastly, if the seat has been installed using a plastic insert and cap system, it may not be able to be removed without breaking the insert.
In this case, you may need to replace the entire seat in order to remove it.
Are Round toilet seats different sizes?
Yes, round toilet seats come in different sizes. Generally, they come in standard, compact round, and elongated sizes, but some brands offer additional sizes to fit specific needs. Standard round toilet seats measure 16.
5 inches long by 14 inches wide and fit onto many of the most common toilets. Compact round seats are slightly smaller than standard round seats, typically measuring 16 inches long by 12. 5 inches wide.
These seats are best suited for small bathrooms or toilets ingrained in a wall. Elongated seats are often found in commercial bathrooms and measure 18 to 18. 5 inches long by 14 to 14. 5 inches wide.
They typically accommodate people who are larger or taller than average. Beyond these standard sizes, some manufacturers offer seats that range from 12 to 18 inches in length and from 12 to 16 inches in width.
Look for the seat measures printed on the packaging to determine the exact size for your round toilet seat.
What happens if you put an elongated toilet seat on a round toilet?
If you try to put an elongated toilet seat on a round toilet, it will not fit properly and will not be level or secure. The shape of the seat does not match the shape of the bowl, so it won’t be able to provide any support or stability.
This means that the seat could potentially be unsafe and it may be difficult to install. Additionally, the bowl and seat shape mismatch may cause the lid to fit improperly, as well. If you want to add an elongated toilet seat to your round toilet, you should purchase a conversion kit.
This kit will include brackets and special hardware that will help to convert your round toilet into an elongated one.
Are toilet seat holes standard?
Yes, toilet seat holes are standard. Most modern toilets follow a standard size, which is 16. 5 inches from the center of the seat’s mounting holes to the center of the opposite mounting hole. This should give a comfortable fit for most adults, although the size may vary slightly from model to model.
If you are unsure of the size, you can measure the hole size yourself with a ruler or measuring tape. It is important to measure the hole size accurately to ensure that your toilet seat fits properly.
How do I know if my toilet is 2 or 3 inches?
To determine if your toilet is 2 or 3 inches, you will need to check the size of your toilet’s inlet. This is the point where the water supply line connects to the toilet. It is usually located directly behind or near the bottom of the tank.
If the diameter of the inlet is 2 inches, then the toilet is a 2 inch toilet. If the diameter of the inlet is 3 inches, then the toilet is a 3 inch toilet. Additionally, when looking at the toilet, you may be able to tell if it is 2 or 3 inches based on the size of the hole in the bowl itself.
If the hole is nearly the same size as the inlet, it is likely a 3 inch toilet. If the hole is much smaller than the inlet, then it is likely a 2 inch toilet. To be sure, however, it’s best to measure the size of the inlet.
What is the most common size toilet seat?
The most common toilet seat size is generally considered to be either “Round” or “Elongated” (approx. 16. 5″ from seat to the center of the toilet bowl), which are both widely used in the U. S. and other parts of the world.
Elongated toilet seats are typically about two inches longer than round toilet seats, giving them a slightly more comfortable feel. Some people may prefer the look of a round toilet seat; however, the elongated toilet seat is more commonly used due to its additional comfort.
In addition to the standard sizes of round and elongated, there are other more unusual toilet seat size options available such as “Compact Elongated,” “Jumbo,” and “Extended Elongated. ” The size of the toilet seat should match the size and shape of the toilet bowl, so it is important to make sure that the size of the seat is appropriate for the toilet bowl before purchasing.
How do I know if I have an elongated or round toilet seat?
To determine if you have an elongated or round toilet seat, you will need to measure the length and width of your seat. An elongated toilet seat is typically around 18-19 inches in length and 14-16 inches in width.
A round toilet seat is typically around 16-17 inches in length and 14-15 inches in width. Additionally, an elongated toilet seat typically has an oval or oblong shape while a round toilet seat has a circular or semi-circular shape.
Since toilet seats come in a variety of sizes, it is important to measure your particular seat before purchasing a replacement. You can also look at the model number or specifications of your toilet seat to determine if it is elongated or round.
If you are still not sure, you can consult with a professional at a home improvement store.
What is the difference between a round toilet seat and an elongated one?
The main difference between a round toilet seat and an elongated one is the size and shape of the seat. A round toilet seat is, as the name implies, round in shape and usually measures about 16. 5 inches from the front of the bowl to the back.
An elongated toilet seat is oval, and usually measures about 18. 5 inches from the front of the bowl to the back. In addition, the elongated seat has a larger opening and is slightly longer than the round seat, making it more comfortable for adults and some elderly individuals.
Some people also find that an elongated seat makes using the toilet easier and less awkward.
In addition to size and shape, there can also be differences between the materials used to make each seat. Round toilet seats are typically made of either plastic or wood, while elongated toilet seats can be made of a variety of materials including plastic, wood, molded wood, and even heat-resistant urea formaldehyde.
In terms of design, round toilet seats tend to feature a standard design and are often simpler in terms of detailing and decorations. On the other hand, elongated toilet seats come in a number of styles and colors and may include more intricate detailing or even designer colors and textures.
Finally, it is also important to note that round toilet seats are usually cheaper than their elongated counterparts. This is primarily due to the cheaper materials that are used to make the round toilet seat and the fact that it is shorter and simpler in design.
Which toilet seat is more comfortable round or elongated?
The answer to which toilet seat is more comfortable depends on individual preference, as it is largely a matter of personal choice. Round toilet seats are generally less expensive and less bulky, and they can actually provide a more ergonomic shape that fits better with the natural shape of the body.
However, they may also be more difficult to sit on for larger people due to their smaller surface area. Elongated toilet seats offer more comfortable seating due to their larger surface area, which can accommodate larger people more easily.
Additionally, elongated seats often offer a cleaner look and feel, and can help to prevent scooting and sliding. Ultimately, the decision is up to the individual in terms of which style is more comfortable for them.
There are a variety of colors, materials, and finishes available for both round and elongated toilet seats, so it is possible to find something that suits each individual’s needs.
Why do people buy elongated toilet seats?
People buy elongated toilet seats for a variety of reasons. Generally speaking, elongated toilet seats are more comfortable and offer more support than traditional round toilet seats. They also have a more modern appearance which can enhance the look of the bathroom.
Additionally, elongated toilet seats fit better in larger bathrooms, making them ideal for family homes. They also allow for greater leg room and greater sitting surface area, which makes them ideal for people with larger body types and those with mobility issues.
Finally, they are easier to keep clean than round toilet seats, since they have wider gaps between the seat’s hinge and the bowl, and this allows for more thorough cleaning.