Removing a bathtub drain with broken cross members can be tricky but it is possible with the right tools and technique. Firstly you need to determine how the drain is fixed in place. Many drains screw into place or are held in place by nuts underneath.
If the drain is a screw-in type, you need to use a screwdriver or pliers to unscrew it. If the cross members are broken, you can carefully use the screwdriver leverage to unscrew the drain from underneath the bathtub.
If the nut or bolts securing the drain are corroded you may need to use a hammer and chisel to break up the nut. This can be a bit tricky so be sure to practice safety, such as wearing safety glasses and protective clothing.
Once the drain is removed, it is time to clean up any of the broken bits and pieces that remain. Depending on the size of the broken pieces you may need to use an emergency plumber’s snake or a small vacuum to remove any broken bits in the pipes below.
Finally, the new drain will need to be properly fitted. This may require further chiselling of the bathtub surface if the broken pieces are too large or if the drain won’t fit into the existing opening.
If necessary, use some plumber’s putty around the edges of the new drain to prevent water from leaking. Then, use a wrench to tighten the drain securely in place and you should be all set!.
Is there a tool to take out a tub drain?
Yes, there is a tool that can be used to take out a tub drain. Generally, the tool you will need is called a tub drain removal wrench. This type of wrench is designed to fit over the top of the drain and has a long handle which easily turns the drain to loosen and remove it.
You may also need some additional tools such as pliers or a screwdriver to help with manipulating the drain parts. In some cases, depending on the model of your tub drain, you may need to use more specialized tools such as a basin wrench or an L-key.
What is the easiest way to remove a bathtub drain?
The easiest way to remove a bathtub drain is to use a drain removal tool. Start by finding the drain cover and removing it. You can either use a screwdriver or a flat head object to remove the cover.
Once the cover is removed, locate the drain assembly underneath the bathtub drain. Use the drain removal tool to unscrew the drain assembly. Make sure to use the correct sized tool to ensure that the drain comes out easily.
It is important to remember to go slowly and to use lots of force as the drain can become stuck. Once the drain has been removed, disconnect any pipes or fittings from the drain assembly. After all the pieces have been disconnected, move the parts away from the bathtub and dispose of them properly.
How do you take apart a push button shower drain?
Taking apart a push button shower drain requires a few basic tools, such as a screwdriver, Allen wrench and pliers. Begin by shutting off the water supply to the shower by turning off the shut off valve.
Then, remove the push button cover from the drain by unscrewing it and lifting it off. You will then see the two screws which secure the spring loaded push button underneath. After unscrewing these, you should be able to pull the load push button upwards and out.
Finally, you can use a flathead screwdriver to carefully pry the drain cover off. Depending on the make and model, you may also need to unscrew a holding bolt or use an Allen wrench to release the fastener.
Afterwards, you can lift the drain assembly out or unscrew the drain pipe from the shutter.
What can I use instead of a drain wrench?
If you don’t have a drain wrench, then you can use an adjustable wrench or a pair of pliers. For plastic pipes, you can use channel locking pliers to turn the nuts until they become loose, and then finish the job with an adjustable wrench.
If you need to cut bolts or plastic nuts off, you can use a hacksaw, a ratchet wrench, a sawzall, or a reciprocating saw. Lastly, you can use a flex head or ratchet wrench if space is limited or there is limited access to the nut or bolts.
What is the bathtub drain lever called?
The bathtub drain lever is often referred to as a bathtub trip lever. This lever is usually located near the bottom of the bathtub, near the drain, and is used to open the drain to let out water. It is usually connected to a linkage, which is connected to a stopper located inside the drain that is opened and closed by the lever.
The term “trip lever” is derived from the action or process of the lever being used to trip the stopper in order for it to open or close.
Can you pour pop down the drain?
No, you should not pour pop down the drain. Pop contains sugars and syrups that could cause clogs and other problems. Not to mention, other ingredients such as caffeine, which can be harmful to the environment.
Pouring pop down the drain can lead to plumbing problems and could also contaminate your local water supply. The best way to dispose of pop is to put it in the trash so it doesn’t cause any problems.
Can Coca-Cola clear a drain?
No, Coca-Cola cannot be used to clear drains. While it may appear to be an effective way to dissolve clogs, the acidity and sugar content from the drink can actually damage pipes and cause more harm than good.
It can cause corrosion to the pipes, leading to low water pressure and eroding the plumping system. Additionally, the sugar content can actually increase the likelihood of a clog forming, as it will attract small particles and create a sticky residue.
Therefore, it is best to use a commercial drain cleaner or a plumbing snake as an effective way to clear a drain.
Why pour hydrogen peroxide down the drain?
Hydrogen peroxide can be used to help clean out drain blockages. It can be poured directly into your drainage system, but it should be done carefully and with caution. Hydrogen peroxide breaks down organic matter, such as hair, soap residue, grease, food particles, and other debris that can build up in your pipes and cause clogs.
The oxygen molecules in the hydrogen peroxide react with the organic material, breaking it down into its component parts. The decomposition of these materials then helps loosen and loosen debris that has built up in the pipes, allowing it to be cleared out.
In addition to effectively removing clogs, hydrogen peroxide helps to sanitize the pipes and keep them free from bacteria and other germs. It is important to remember that hydrogen peroxide is a bleaching agent and can discolor certain materials, so it should not be poured directly on any surfaces.
Why can’t I unscrew my bathtub drain?
It is possible that you are unable to unscrew your bathtub drain due to a build-up of mineral deposits or corrosion to the drain’s components. Mineral buildup in the drain can cause it to become tight and extremely difficult to remove.
Corrosion can also cause the drain to stick, due to the rust that has built up around the threads. Additionally, the previous plumbing work or installation may have been done incorrectly, or the tub may have settled since it was installed, causing it to be out of alignment and, therefore, difficult to remove.
If you have tried to use wrenches, pliers, and other equipment to remove the drain and still haven’t been successful, then you may need to call a professional plumber to help.
Is it hard to change a tub drain?
It all depends on the type of drain it is and the materials that you have. Generally, changing a tub drain is a relatively simple process and can be done in a few hours. To start, you’ll need to locate the tub’s drain assembly.
Depending on the type of drain, this could be located under the tub or inside the adjacent wall. If it’s under the tub, you’ll need to use a basin wrench or other special tool to loosen the pipes to access the drain.
If the drain is inside the wall, you’ll need to carefully remove the access panel to gain access to the drain. From there, you’ll want to loosen the nuts from the drain body and carefully remove the stopper.
To complete the job, you’ll need to install the new drain, ensuring the gaskets and seals are properly secured and the new nuts are properly tightened. Finally, you’ll want to test the new drain and confirm the drain body is properly sealed.
With the right tools and a bit of patience, changing a tub drain doesn’t need to be a hard project.
Are bathtub drains reverse threaded?
No, bathtub drains are not reverse threaded. The threads on a bathtub drain generally run the same direction as other standard threaded pipes and plugs. The threads on the drain body will go in the same direction as the threads on the stopper.
The stopper also consists of threads that go in the same direction. The threads usually run clockwise to tighten and counter-clockwise to loosen. It is possible to find reverse threaded bathtub drains, but that is not the norm.