Installing a towel bar without the use of screws is possible, but it is not as secure as a traditional screw-based mounting. To install a towel bar without screws, you will need adhesive tape or double-sided tape.
Clean the surface where you want to put the bar and follow the instructions provided by the manufacturer to attach the adhesive tape to the surface. Once the tape is in place, securely attach the bar to the wall by pressing the bar firmly against the tape.
Make sure that the bar is level and centered to ensure it is securely affixed to the wall. Secure the ends of the bar with adhesive or double-sided tape as well. As a last step, press the ends of the bar onto the wall to ensure they’re touching the tape and wall securely.
The adhesive may take some time to dry and become secure, so be sure to follow the manufacturer’s instructions for drying time and how long the adhesive should set before being used.
Can you hang a towel bar with command strips?
Yes, you can hang a towel bar with command strips. Command Strips have been around for over 30 years and have made a name for themselves as a mounting solution for many indoor applications. Their easy-to-use strips provide a secure and damage-free way to hang things from walls, including lightweight items such as a simple towel bar.
To hang a towel bar with Command Strips, start by choosing the right size and type of Command Strip for the job. Depending on the size and weight of the towel bar, you may need to use more than one strip to ensure a secure hold.
Once you have the right strips, clean and dry the wall surface and heat up the adhesive with a hairdryer. Peel back the paper liner on the adhesive side and firmly press the Command Strip to the wall.
Finally, mount the towel bar to the wall using the built-in nails the pack includes and press the button on the Command Strip to ensure it is secure and adhered properly.
How to install bathroom accessories without drilling?
Installing bathroom accessories without drilling is possible and can be done with a variety of different products. One option is to use adhesive hooks that can hold up a wide variety of bathroom accessories.
These hooks use strong adhesive to adhere to any smooth surface, and they can be removed easily when needed. Another option is to use tension rods or expandable shower caddies, both of which can also be used to hold a variety of bathroom items.
Finally, suction cups can be used to attach items such as loofahs and soap dishes to the bathroom wall without the need for drilling. All of these methods are quick and easy and have the added bonus of not causing any damage to the walls.
How much weight can command strips hold up?
It depends on the size and type of command strips that are used. Larger strips, in general, are able to hold greater weight. For instance, the Medium Strips from Command are able to hold up to 4 pounds, while their Jumbo Strips can hold 16 pounds.
The Outdoor Strips from Command are even stronger, with the Medium ones being able to hold up to 7. 5 pounds and the Large up to a whopping 5 pounds. Depending on what you need to hang, different sizes and types of Command Strips will be best suited to the job.
It is also important to note that the weight capacity of the strips are not necessarily indicative of its holding strength — using multiple strips and/or additional anchoring methods can increase the stability of whatever you are hanging even further.
What will command strips not stick to?
Command Strips are an adhesive product used for hanging objects to walls, but there are some surfaces that they will not stick to. These can include: porous surfaces such as brick, cement, cinder block, asphalt, stucco, porous wallpaper, and some other textured surfaces; surfaces that are overly glossy, such as glass, some plastics, some metal surfaces, and certain paint finishes; surfaces that are not made of wood, metal, or drywall, such as plaster, acrylic, polystyrene, and certain types of vinyl; and surfaces that may have oil, dust, dirt, or residue such as soap scum on them.
In addition, Command Strips do not work with surfaces that are even slightly damp, and will not grip conversely soft surfaces like fabric or cloth.
What is stronger than command strips?
When it comes to finding something stronger than command strips, two options come to mind: adhesives or hardware.
Adhesives are the strongest option as they bond to the surfaces, creating a permanent bond. Ranging from tough epoxies to extra-strength silicone sealants. All of these adhesives come with different drying times and levels of tackiness and strength, so it’s important to select the one that best meets your needs.
Depending on the size of the item you’re hanging and how well the adhesive needs to hold it in place, some adhesives may need to be used in combination with mechanical anchors or tensioners.
Hardware is usually the next strongest option used in place of command strips. This is more appropriate for heavier items, like large mirrors or artwork. Hardware refers to any anchoring material that can be attached permanently to the wall, such as toggle bolts, molly bolts, or lag screws.
Tools are also required to install this type of hardware and the holes will be visible after they are installed.
Choosing the right option out of command strips or one of these stronger methods will depend largely on what type of surface you’re hanging an item on, the weight of the object, and the type of look you desire.
In general, adhesives are the strongest option, followed by hardware.
Do Command strips come off the wall easily?
Yes, Command strips come off the wall easily. The strips use a patented adhesive technology that holds strongly on a variety of surfaces, yet leaves no surface damage. To remove, simply grab the bottom of the strip and stretch it down – the strip will release cleanly from the wall.
For heavier items, a gentle repetitive pulling motion may be required. It helps to apply a heat source, such as a hair dryer or warm cloth, to the strip for a few seconds to help loosen the adhesive.
It is also recommended to pinch the strip at the base to break the seal, then pull the strip down. It is important to avoid pulling the strip towards the wall because this can damage the wall or leave residue.
Are Command Strips OK in bathroom?
It is recommended that Command Strips should not be used in a bathroom environment. Humidity and steam from a shower or bath can damage the adhesive on the strips and reduce its performance. Additionally, water splashes onto the adhesive can cause it to weaken over time and the strips may eventually come loose or even fall off.
Therefore, if you are considering using Command Strips in a bathroom, it would be best to use it in conjunction with other hardware, such as screws and anchors, to ensure a secure installation.
What is the heaviest thing you can hang with Command Strips?
The weight limit for Command Strips vary depending on which type of strips you are using, but generally they can hold up to 7. 5 lbs. per strip. If you are hanging a heavier object you can use two or more strips to increase the overall weight limit.
Be sure to check packaging and guidelines prior to use as these vary depending on which type of strips are used. Some specialty strips can even hold up to 16 lbs. per strip if the right kind are used.
Additionally, you can use multiple strips to increase the overall weight, such as four medium strips can hold approximately 30 lbs. , eight small strips can hold approximately 5 lbs. , and eight large strips can hold 24 lbs.
However, it is always recommended to check the package for weight requirements based on what you are hanging.
Can I use Command strips to hang fabric?
Yes, you can use Command strips to hang fabric. Command strips are known for their secure hold, making them ideal for hanging heavier fabrics and wall hangings. Just make sure you read the package instructions to ensure the strips are strong enough to support the weight of the fabric or wall hanging you’re planning on hanging.
To hang fabric with Command strips, first make sure the surface is clean and dry, then peel off the adhesive backing on the Command strips and press firmly against the wall. Hang the fabric by looping drapery rings or tabs, if the fabric has them, through the loops on the strips.
Finally, press firmly on the fabric to ensure even contact with the strips.
How much weight can hang with Command hooks?
The amount of weight that Command hooks can hold depends on the model, size and type. Generally, small strips can hold up to 3 pounds, medium strips up to 7 1/2 pounds, and large strips up to 16 pounds.
Command hooks are typically used for hanging lightweight items such as dry erase boards, small calendars, craft projects or cords. They should not be used for items that could cause injury if they were to fall, as they may not be able to hold the weight.
If you are hanging heavier items, use a different type of wall hanger that is specifically designed to hold heavier weights.
How do you install a basic towel bar?
Installing a basic towel bar is a simple DIY project that barely requires any tools. The most important step is to carefully measure the wall where you plan to hang your towel bar to make sure the bar will be mounted level and secure.
Here is a step-by-step guide for installing a basic towel bar:
1. Carefully measure the wall where you plan to hang the towel bar. Mark the desired height of the towel bar and use a level to make sure the marks are level to each other.
2. Pre-drill two holes at each mark for your towel bar mounting hardware. Be sure to use a drill bit that is the same size as your mounting screws.
3. Place the template provided with the towel bar hardware on the wall and use a pencil or pen to trace around the template’s outer edge. Remove the template and discard it.
4. Use a tape measure to measure the distance between the mounting holes and make sure it matches the width of your towel bar.
5. Apply the wall anchors at each hole, inserting them into the pre-drilled holes and pushing them as flush to the wall as possible.
6. Place the towel bar over the two anchors, making sure the mounting holes line up with the anchors in the wall. Secure the towel bar with the mounting screws provided with the hardware.
7. Place the end caps onto the ends of the towel bar and tighten the screws to secure them.
And that’s it! You’ve finished your basic towel bar installation.
Where should a towel bar be hung?
A towel bar should generally be hung between 48 and 52 inches from the floor. It should also be installed near a sink, usually centred between two cabinets, and should be around 60 inches above the floor.
When hanging a towel bar, make sure it is securely mounted and the studs or wall anchors are capable of bearing the weight of the bar. The mounting studs should be placed in such a way that the bar is level and does not sag.
It is a good idea to check for levelness with a carpenter’s level when installing a towel bar. When mounting a towel bar on wall-mounted tiling, make sure that the wall tiles are in a straight line and the space between them is the same on each side.
If any grout needs to be cut away in order to set the towel bar flush, be sure to seal the area with a flexible grout sealant as soon as possible.
Are towel bars or hooks better?
It depends on what your personal preference and individual needs are. Towel bars are great for multiple towels and to keep a neat, uniform storage display. Towel hooks are ideal for those who are frequently on the go, since they provide an easy, convenient way to hang a towel when you’re in a rush.
If you’re looking for a space-saving option, then towel hooks are the better choice as they don’t take up much space. Furthermore, towel hooks also come in a wide variety of shapes, sizes and designs, so you can find one that complements the look of your bathroom.
On the other hand, towel bars are usually more aesthetically pleasing, as they come in an array of styles, finishes and decorative materials. Since towel bars are designed for larger items, you can use them for more than just towels, such as hanging your robe or a few small items.
Ultimately, it’s up to you to decide whether towel bars or hooks suit you best.
Do you need anchors for towel bar?
Yes, you generally need anchors for towel bars. Anchors, such as toggle bolts or molly bolts, are necessary to provide enough support for the bar, which will typically have a weight of several pounds when hung with wet towels.
Without the anchors, it could easily come off the wall due to the weight, resulting in a potential safety hazard.
Installing the anchors can be tricky, and you may need to hire a professional if you’re not comfortable doing it yourself. Whatever type of anchors you use, they should be suitable for the type of wall you’re dealing with, like drywall.
You also want to make sure that the screw holes are properly aligned and that the towel bar is level.