To deep clean your Vitamix, you should first clean the outside with a damp cloth or sponge and a mild, non-toxic detergent or all-purpose cleaner. Once the outside is clean, you should fill your blender container halfway with warm (not hot) water and a few drops of dishwashing liquid.
Place the blender container onto the base and turn the blender on the lowest speed setting for 30 seconds. Stop the blender and let the soapy water sit for 10 minutes. After 10 minutes, turn the blender on to the lowest speed setting for 30 seconds again, then turn the blender off.
Dump out the soapy water and rinse the blender container with warm water and a damp cloth or sponge. To sanitize and deodorize your blender, you can use white vinegar. Fill the blender container with a mixture of 1/2 cup of water and 1/2 cup of white vinegar, then place the blender container on the base and turn the blender on the highest speed setting for 1 minute.
Stop the blender and let the vinegar solution sit for 15 minutes. Turn the blender on again to the highest speed setting for 1 minute, then turn the blender off. Wipe out the interior of the blender container with a damp cloth or sponge, then rinse the container with warm water.
Finally, wipe down the outside of the blender with a damp cloth or sponge.
How do you run a clean cycle on a Vitamix?
To run a clean cycle on a Vitamix, first fill the container to the 2-cup mark with warm water and a drop of dish soap. Place the lid onto the container and select the “Hot Soups” setting if your Vitamix has an accompanying cookbook, or select the maximum speed and then turn it to variable speed 10 if it does not.
Turn your Vitamix on and allow it to run at its full speed for 1 to 2 minutes. Once the mixture is frothy, stop the unit and add 1 to 2 more cups of cold water. Put the lid back on the container and select variable speed 1.
Allow the machine to run for 30 to 45 seconds to rinse the interior. Turn off the machine and remove the lid. Wipe down the container and blade with a damp towel. Rinse the container thoroughly before use.
How do you deep clean a blender?
To properly deep clean your blender, start by removing the jar from the base and disassembling it completely. Empty out any remaining contents, then wash all of the parts (jar, lid, blade assembly) in hot, soapy water.
Use a brush or sponge to remove any tough residue. Rinse the parts and then let them air-dry completely.
Meanwhile, use a damp cloth to wipe down the blender’s base, removing any stuck-on residue. Pay special attention to the crevices and knobs, making sure to get in any hard-to-reach spots. For an extra-deep clean, you can use a cotton swab to help get into those tiny crevices.
When the blender’s components and base are clean, put the parts back together. To sanitize the blender, add some vinegar to the jar and fill it with warm water. Then, run the blender on high speed. Make sure to work it long enough to get all the vinegar-water mixture circulating, then let it sit for 10 minutes.
After it’s done resting, blend it one more time, and then discard the mixture and rinse the parts thoroughly.
Your blender is now deep cleaned and should be ready to use.
Can you use magic eraser on Vitamix?
Yes, you can use a magic eraser on a Vitamix blender, but it is not recommended by the manufacturer. Magic erasers are abrasive and can often cause damage to the surface of the blender if used too harshly or on a rough or sticky surface.
It’s best to use a non-abrasive cleaner such as a gentle dish soap and soft cloth to clean your Vitamix blender. If you do decide to use a magic eraser, use it gently and be sure to rinse the surface of the blender after using it with warm water.
How often should I replace my Vitamix blade?
Your Vitamix blade should be replaced at least once per year, but it largely depends on how often you use your Vitamix as well as the ingredients you’re blending. If you find that your Vitamix isn’t performing as it usually does or that your recipes aren’t being blended as expected, you may want to consider replacing your blade before a full year has passed.
Additionally, if you’re blending hard fruits or vegetables, like apples or carrots, on a regular basis, it’s advisable to replace your blade sooner.
Can I use bleach to clean my Vitamix?
No, you should not use bleach to clean your Vitamix or any other blender or food processor. Bleach is too caustic and can damage the plastic and rubber components of the blending pitcher and its lid.
Even a small amount of bleach residue left behind can be dangerous if it gets into contact with food. There are better, more suitable cleaning agents — such as vinegar, baking soda, and lemon juice — that you can use to clean your Vitamix without damaging it.
When in doubt about a cleaning product, always read the manufacturer’s instructions and warnings before using it on the appliance.
What can you not put in a Vitamix blender?
A Vitamix blender is an incredibly powerful tool that can quickly and easily blend a variety of ingredients, but there are some things that you should not attempt to put in it. Hot liquids, as they could cause scalding, expandable foods like rice or popcorn that could cause clogs, fibrous vegetables like celery, as it can tangle up and jam the motor, and stones or pits from certain fruits and vegetables should be avoided.
Another item that should not be put in a Vitamix blender is the blade assembly, as this could cause it to become misaligned, leading to an uneven blend or the motor becoming damaged. Lastly, it is important not to overfill the blender, as this could cause damage to the motor.
How do you get black mold out of a blender?
Removing black mold from a blender can be an intimidating task. However, with the proper technique, you can make sure your blender is free of any contaminants.
First, make sure the blender is unplugged and the blades are covered by a protective material before you begin. Then, fill the blender jar halfway full with water and just a few drops of either bleach or white vinegar.
Allow the mixture to sit in the blender for at least 5 minutes. This will help loosen any mold buildup.
After the mixture has sat for at least 5 minutes, you can empty the blender jar and use a soft-bristled brush to scrub the walls of the blender jar. Be sure to move the brush around to get into all of the nooks and crannies.
Next, you may need to use a more abrasive scrubbing tool, such as a scrub rag, steel wool, or a toothbrush to really get all the mold out. Be sure to rinse the walls thoroughly after using any abrasive tool.
Finally, fill the blender jar with water and a few drops of dish detergent and blend the mixture on medium-high for 1-2 minutes. Make sure the lid is secure before turning the blender on. This will help get any mold concentrations out.
Once the cleaning process is complete, it is important to sanitize your blender as well. Fill the blender jar with a mixture of water and white vinegar, and leave it in the blender overnight. The next day, run the mixture through the blender and then rinse the jar thoroughly until all of the vinegar is gone.
By following these steps, you can ensure that your blender will be clean and free of any harmful black mold.
Can you unscrew the bottom of a Vitamix?
No, it’s generally not recommended to unscrew the bottom of a Vitamix. The electronics, such as the drive socket, are designed to only be accessed through the lid. This makes sure the electronics and electrical components are always properly sealed and protected from any dust, dirt, or other debris that could get inside and cause issues.
However, should the container ever need to be opened, Vitamix recommends that their technicians handle this work.
How do you know when to change Vitamix blades?
Vitamix blades are extremely durable, but will eventually need to be replaced over time with regular use. The best way to know when it’s time to change the blades is to pay attention to how your Vitamix is performing.
If you notice that your Vitamix’s performance is diminishing, or that the blades are not producing as fine a grind as before, then it’s time to change the blades. Other signs of needing to change the blades include a chipped or rusty blade, and diminished power when blending.
If the blade is cutting through food and producing an increasingly fine grind, then the blades are presumably fine and do not need to be changed. If in doubt, check with your Vitamix manufacturer or an authorized Vitamix repair center.
They will be able to better advise you on the condition of your blades and whether or not they should be changed.
Can you get Vitamix blades sharpened?
Yes, you can get Vitamix blades sharpened if necessary. The Vitamix blades are made out of hardened stainless steel and are extremely durable, so they rarely need to be sharpened. However, if they do begin to dull over time, you may be able to find a local sharpening service to sharpen them.
It is important to make sure that the sharpeners are specifically certified to work on Vitamix blades as they are a specialized shape. If you cannot find a certified sharpener nearby, you can also purchase new blades directly from Vitamix.
How do I get something out of the bottom of my Vitamix?
The most common way is to use a small spatula or spoon to reach in and scrape out any stuck-on ingredients. If the ingredients are really stuck on, you can also try using a bottle brush or other soft cleaning tool to gently remove them.
Another option is to fill the container with warm, soapy water and let it sit for several minutes before attempting to remove any stuck-on ingredients. Finally, you can use a small brush attachment on the end of your Vitamix for more in-depth cleaning, or use a special cleaning tool designed to fit in the bottom of the container.
Why is my Vitamix blade not spinning?
The most likely cause is a lack of proper lubrication. The blades require oiling to stay functional, so it’s important to check the lubrication before troubleshooting further.
Another possible cause is a worn drive socket. A worn drive socket can cause the blades to spin slowly or not at all. To check for a worn drive socket, first unplug the Vitamix and then take a look at the socket.
If it has visible signs of wear and tear, it should be replaced.
It’s also possible that there is something blocking the blade. If there is an obstruction such as a large piece of food or the lid, the blades may not be able to spin. Carefully remove the obstruction and then try the Vitamix again.
Finally, there could be an issue with the motor. If none of the above steps work, the motor may need to be serviced. It’s best to take the Vitamix to a professional for proper diagnosis and service.
How do you remove a Vitamix drive socket?
Removing the drive socket from a Vitamix blender can be a relatively simple process, but it requires some caution and the appropriate tools. The first thing you need to do is unplug the blender. Then, place the blender on a flat, stable surface and remove the small cover panel on the lower front of the blender.
This cover panel can be easily removed with a screwdriver. Once you have removed the cover panel, you will be able to see the drive socket and its components.
You will need two wrenches to remove the drive socket. The first wrench should fit the larger, outer bolt on the drive socket assembly, and the second wrench should fit the smaller, inner bolt. Use the first wrench to hold the larger bolt in place, and the second wrench to turn the smaller bolt and loosen the assembly.
You may need to turn the smaller bolt counterclockwise to loosen it. Once the small bolt is removed, you can remove the outer bolt and the drive socket assembly from the blender.
Once the drive socket assembly is removed, you can take it apart and replace any parts that are faulty before reinstalling it. Make sure to check that all of the components are in working order and replace any faulty parts before installing the drive socket back in the blender.
Once all of the components are in good working order, carefully reassemble the drive socket, and then use the two wrenches to tighten the bolts to reinstall the drive socket into the blender. Carefully place the screw back in the cover panel and tighten it to secure the drive socket and its components in place.
Replug the blender, and you’re finished.
How do you clean a blender with baking soda and vinegar?
Cleaning a blender with baking soda and vinegar is a simple process. Start by unplugging your blender and removing the blade and lid. Make a cleaning solution by combining a few tablespoons of baking soda with 2 cups of white vinegar and a few drops of dish soap.
Put the solution in the blender and fill it up with hot water until it is about halfway full. Turn the blender on and let it run on low speed for a few seconds. Stop the blender and let the solution sit for 10 to 15 minutes.
After the solution is done sitting, finish up the cleaning process by running the blender on high speed for about 30 seconds. Once complete, empty the blender and rinse out any remaining residue with hot water.
Finally, let the parts air dry before reassembling the blender and plugging it back in.