To add a hand-held to an existing shower, you will need to identify the best location to install the holder. Depending on the layout of your bathroom, this could be on the wall or on the side of the shower.
Once you have determined the location, you will need to turn off the water supply to the shower and prepare the surface for the hand-held holder. This may require sanding, drilling, and patching the wall.
After the surface has been prepared, attach the holder to the wall with appropriate hardware. You may need to adjust the plumbing, so hire a licensed plumber to ensure that everything is properly connected.
Lastly, turn the water supply back on and test the hand-held to ensure that it is working correctly.
Can I change my shower head to a handheld?
Yes, you can change your shower head to a handheld one if you would like. The process for changing out the shower head is relatively simple and straightforward. First, you will need to locate the existing shower head you are replacing, and then turn off the water supply to the shower.
Once the water is shut off, you will need to unscrew the existing shower head by twisting counter-clockwise and remove it from the pipe. Now, you can install the new handheld shower head. Wrapping a cloth over the threads of the pipe can help make sure the shower head screws on tightly and securely.
Place the shower head onto the pipe until it is firmly seated. Finally, turn on the water supply and test to make sure the shower head is working properly. If you run into any issues during the installation process, you may need to call a plumber for assistance.
How do you divert water from shower head to handheld?
In order to divert water from a shower head to a handheld, you will need to install a diverter valve. This is a valve that allows you to switch between the two different water outlets, either the shower head or the handheld.
Before starting the installation make sure to turn off the water supply to the shower by locating and shutting off the valves supplying the shower. Once the water is shut off, start by disassembling the existing shower head.
Loosen the set-screws to remove the existing shower head, and remove any accompanying wall brackets. Now install the diverter valve. Use a wrench to attach the new valve to the shower wall, making sure to screw it in tight.
Next attach the shower arm to the outlet of the diverter valve. This can usually just be hand-tightened. Depending on the model of diverter valve, the diverter might need to be set in the desired position before the arm is connected.
Last, attach the handheld shower head. Use a hand wrench to attach the shower head to the arm, again ensuring it is tight. With that done, you can now turn on the water supply, and check that the diverter is working correctly by switching between the two outlets.
How much does it cost to install a handheld shower head?
The cost to install a handheld shower head can vary greatly depending on the type of shower head and the complexity of the installation. Generally, the cost of a handheld shower head itself will depend on the quality and features desired.
A basic handheld unit with a single spray setting could cost anywhere from $15 to upwards of $150.
In addition to the cost of the shower head itself, other factors to consider are the costs of labor and supplies. The complexity of the installation (including the material used to mount the shower head) can impact the labor and installation costs.
In some cases, you may need to hire a professional plumber to install the unit, and those costs can range from a few hundred to several thousand dollars, depending on the extent of the work.
Finally, additional costs may include the need for any additional plumbing supplies or materials for the installation.
To summarize, the cost of installing a handheld shower head can range from around $15 – $150 for the shower head, plus labor and plumbing supply costs. Additionally, depending on the nature of the installation, hiring a professional plumber may range from a few hundred to several thousand dollars.
Are handheld shower heads worth it?
Handheld shower heads are definitely worth considering as an upgrade to your showering experience. They offer benefits such as more comfortable, controlled showering and increased accessibility. Handheld showerheads also generally provide better coverage than traditional wall-mounted units and let you adjust the flow of water as needed.
The ability to direct water in multiple streams and at different angles proves to be a great convenience when it comes to reaching hard to rinse areas and allows you to conserve water when necessary.
Handheld showerheads also provide an excellent flexibility in terms of the placement of showerheads, allowing you to direct the spray exactly where you need it without having to rely on the placement of a wall mounted unit.
Finally, handheld showerheads are often easier to clean and maintain, making them a great, low-maintenance investment.
Do you need a diverter valve for a handheld shower?
A diverter valve may not be necessary for a handheld shower, depending on the type of shower system you have installed. Generally speaking, if the main showerhead and the handheld showerhead share the same shower arm, a diverter valve is not needed.
This is because the water can be strightly routed to either the main showerhead or the handheld showerhead by just turning off one outlet and turning the other on. However, if your shower system has two separate shower arms for a main showerhead and a handheld showerhead, you would need to install a diverter valve on the shower wall in order to switch between the two.
The diverter valve redirects the water from one showerhead to the other and will usually come with your handheld shower kit.
How do I upgrade my shower head?
Upgrading your shower head is relatively simple and can be done in just a few steps. First, turn off your water supply and take off the existing shower head by unscrewing it. Then, use a cloth or pipe wrench or pliers to remove any fittings or accessories such as aerators.
Next, install the new shower head, making sure to use Teflon tape on the threads to ensure it is sealed properly. Finally, turn the water supply back on and test the shower head to make sure it is functioning properly.
If you want to get a little more involved with your new shower head, you can install a shower arm or get a handheld shower head with a mounting bracket that attaches to the side of the tub or shower.
This may require some more involved tools, such as a drill, so make sure you read the instructions for the shower head carefully before you begin.
Are shower heads easy to install?
In general, installing a shower head is a fairly straightforward task that can typically be completed in about an hour by anyone with a basic understanding of plumbing. In most cases, all you need for the installation is a wrench and a few simple tools.
Assuming you already have the necessary tools to begin with, the actual installation process involves shutting off the main water supply, removing the old shower head, attaching the new shower head to the shower arm, and then finally testing the water pressure.
It is important to make sure that the connections are tight and secure in order to prevent any water leakage. Following these steps should make the installation process a breeze.
Do you need a plumber or electrician to fit a shower?
Whether or not you need a plumber or electrician to fit a shower will depend on the specifics of the shower installation, as certain aspects of the job may require the skills of either a plumber or electrician.
For instance, if the shower is only being fitted to an already existing water and drainage system that is in place, then a plumber would typically be all that is required. But if new plumbing needs to be installed to accommodate the shower, or if the shower needs to be wired into an existing electrical system, then both a plumber and electrician would be necessary.
Before beginning any installation, it’s important to make sure all relevant building regulations, as well as any health and safety considerations, are taken into account. Depending on where you live, some of the installation duties may even require a professional with specific certifications and qualifications.
Therefore, it would be advisable to seek the advice of a reliable, knowledgeable and qualified professional, such as a plumber or electrician, to make sure the job is done safely and meets all necessary requirements.
Do you need consent to install a shower?
Yes, you need consent to install a shower. In most cases, you will need a permit from the local building department to install a shower. Before you start the project, check with your local building codes and regulations to see what permits you need.
Depending on your location, you may need an inspected plan by a licensed plumber or engineer. Your local building department may also require other local permits, such as an electrical permit. Additionally, you will likely also require a certificate of occupancy from your local housing department or fire safety department.
Even if you are doing the work yourself, you may need to hire a licensed professional for certain parts of the installation, such as electrical and plumbing connections. Finally, it is also important to check with your homeowners’ insurance to ensure that your new shower is covered.
Where do you mount a hand-held shower?
A hand-held shower typically mounts on a wall bracket that is installed at the desired height. Installation of the wall bracket will involve drilling a hole and attaching the bracket, followed by running the necessary water supply lines and connecting them to the existing plumbing.
Once the plumbing is in place, the hand-held shower and bracket can be installed by lining up the hand-held shower with the bracket, securing it with the necessary mounting hardware, and connecting the water supply lines to the shower.
The last step is to install the shower head, which should include screwing it onto the bracket from the backside using a flat-headed screwdriver.
Where should a hand held shower be mounted?
A hand held shower should ideally be mounted on the wall. When mounting the hand held shower, you want it to be at a height that is easy to reach and comfortable for the user. Depending on the height of the user, this could be somewhere between 45 and 65 inches from the floor.
The shower head should also be directed away from any tile or stone surfaces that can be damaged by water. Additionally, the water supply line should be securely and safely mounted into the wall and include a shutoff valve for easy shut off if needed.
Finally, the hand held shower and adjustable slide bar should be firmly secured to the wall with an appropriate support such as a wall bracket or wall flange.
Where do you put a shower sprayer?
The placement of a shower sprayer depends on the type of shower it is installed in. A handheld shower sprayer is typically mounted on a adjustable slide bar and can be positioned at any height, allowing for full range of motion.
If the shower has a steam system, the sprayer may be part of a built-in head unit installed directly into the ceiling, at the desired height. Standard showers that feature a showerhead and a handheld sprayer, typically have the handheld sprayer installed at about chest level, for ease of use and convenience.
If the shower does not have a steam system, the sprayer is typically attached to the wall, mounted at a convenient height for use.
How far does a shower head have to be from the ground?
The ideal shower head height is typically between 6-7 feet high from the ground, however it can depend on considerations such as the height of users, the size of the bathroom, available space and the type of shower head.
Many showers also have adjustable shower heads which allow the user to adjust the shower head to a comfortable height based on individual needs. It is also important to factor in safety, where the shower head should not be too high so that users may reach it safely and without any risk of slipping.
In very large bathrooms or for individuals who are especially tall, the shower head may be mounted higher if required, although this should be discussed with a qualified builder prior to installation.
What should be the height of shower from floor?
The ideal height for a shower head is installed at least 6 feet 8 inches off the floor. This is the minimum height recommended by the Americans with Disabilities Act (ADA) to accommodate people with disabilities, however a higher height can also be installed based on preference.
Shower heads should also be angled downward to create a comfortable showering experience for the user. If the shower head is being used in a commercial setting, such as in a hotel, it should be placed at least 7 feet off the ground to accommodate taller users.
Additionally, a shower riser should be at least 3 feet tall and placed in the center of the shower for proper water distribution. The height of the shower may also be dependent on the type of shower being used.
For instance, a handheld showerhead may be mounted up to 7. 5 feet higher than the standard height, while an overhead showerhead may be installed up to 10 feet high. Ultimately, the shower height should be based on the preference of the user.