Installing a hand-held shower with a tub spout diverter valve is relatively easy. First you’ll need to purchase a standard hand-held shower with hose and mounting hardware. Once you have all the supplies necessary, you can begin installation.
1. Start by turning off the water supply and then disconnecting the existing shower head if present.
2. Install the new hand-held shower hose by attaching it to the existing hot and cold water lines.
3. Connect the diverter valve onto the tub spout in place of the old one.
4. Attach the hose to the diverter valve.
5. Test for leaks by turning on the water and allowing it to run for a few minutes. If any leaks are found, tighten the connections accordingly.
6. Lastly, mount the new hand-held shower head to the wall. Be sure to use appropriate fasteners, anchors and wall mounts as specified by the manufacturer.
And that’s it! With a few simple steps and some basic supplies, you’ll soon be ready to enjoy the luxurious convenience of a new hand-held shower with a tub spout diverter valve.
Do you need a diverter valve for a handheld shower?
Yes, you will need a diverter valve for a handheld shower. This type of valve is typically installed in the wall and allows you to divert the water away from the main showerhead and to the handheld showerhead, allowing you full control over which configuration to use.
Depending on the shower unit, diverter valves can come in a variety of shapes, sizes and styles and must be compatible with the shower components for proper installation and functionality. Generally, diverter valves are quite simple to install and require minimal plumbing work, so it’s best to consult a professional for installation to ensure the job is done properly.
Can you add a hand-held shower to an existing shower?
Yes, it is possible to add a hand-held shower to an existing shower. To do so, you should first purchase the desired hand-held shower, which should come with the necessary shower arm, hook and hose. Once you have the component pieces, you’ll need to remove the existing showerhead and arm from the shower wall.
Then use the appropriate tools – typically a wrench, plumber’s tape, and a screwdriver – to install the new shower arm and hand-held showerhead. Finally, you’ll need to connect the hose, and test for water pressure.
It’s best to consult a professional if you’re at all unsure of this process. Doing so can save you both time and money in the long run.
How do I turn my tub spout into the shower?
Turning your tub spout into a shower requires careful planning and installation. The first step is to purchase a shower arm and shower head that is compatible with your plumbing system. You will also need the necessary fittings and connections to attach the new shower head and arm.
Most hardware stores will have a selection of shower systems that will fit most plumbing fixtures.
Once the appropriate parts have been purchased, you should turn off the water supply to the tub spout and disconnect the existing spout if necessary. Place a towel or bucket underneath the elbow joint to collect any water that may drip out when the spout is removed.
To make sure no water seeps out as you work, you may want to tightly seal the opening with a rag or piece of plastic.
Next, attach the shower arm in its designated place. This involves connecting the elbow joint from the tub spout to the shower arm. Remember to use Teflon tape to ensure a waterproof seal. After the shower arm is in place, insert the shower head into the shower arm and secure it tightly with the provided nuts.
Make sure to check for leaks and readjust the fittings if necessary.
Finally, turn the water back on and check for proper operation. Test the shower to confirm that the arm and head are attached securely. You should now have a functional shower in place of your tub spout.
How do you install a hand-held shower head in a bathtub?
Installing a handheld showerhead in a bathtub is fairly straightforward. Here are the steps for you to follow:
1. Gather your tools and materials:Tools you’ll need for this job include adjustable pliers, a drill with a masonry bit, a screwdriver, and a hacksaw. For materials, you’ll need a handheld showerhead, a supply line, and two mounting flanges.
2. Shut off the water supply:Before beginning any installation, you should shut off the water supply to avoid damage or injury. Locate your home’s main valve and turn it counterclockwise to shut it off.
Once the water is turned off, open the faucet to release any water that may be left in the pipes.
3. Remove the existing showerhead:Unscrew the existing showerhead from the wall, using an adjustable pair of pliers. If it has a showerarm, unscrew that as well and set it aside.
4. Drill the mounting holes:Using a masonry bit, mark the holes then drill through the tile or wall surface. Use a level to make sure the holes are in line with each other horizontally.
5. Attach the flanges: Insert the flanges into the holes and attach them to the wall or tile using screw anchors.
6. Install the showerhead: Connect the supply line to the back of the showerhead then screw the showerhead onto the flanges.
7. Turn on the water: With the installation complete, turn the water back on. Check your connections and make sure there aren’t any leaks before using the handheld showerhead.
Do you need a shower diverter?
A shower diverter is a device used to switch the flow of water between a showerhead, a tub spout, and a handheld showerhead or other bathtub accessories. Many shower diverters come with built-in shut-off valves, or are integrated into the bathtub faucet itself.
If you have a bathtub with a single showerhead, then you will probably require a shower diverter. This will allow you to use the showerhead and the tub spout at the same time, to switch between full-body or handheld showers, or to attach accessories like body sprays or a rain-shower head.
Another important function of a shower diverter is to help reduce water waste and conserve energy. With a diverter, when you switch away from the showerhead, the water is shut off. This can help prevent unnecessary water usage and save money on your water bill.
Depending on the type of diverter you purchase and your bathroom setup, a shower diverter may require professional installation. It is important to ensure that any plumbing installation is done properly and in compliance with local codes.
Can I replace a tub spout with hand shower?
Yes, you can replace a tub spout with a hand shower. The process varies depending on the type of spout you currently have installed, but it is doable.
If you currently have a slip-on spout, you’ll need to replace it with a pull-up diverter spout. This type of spout is designed to be connected to the hand shower hose and allows you to switch between the shower and the spout.
If you have a threaded spout, you’ll need to install a hand shower diverter valve that screws onto the existing spout threads. This type of valve attaches to the existing spout and allows you to switch between the shower and the spout.
In both cases, you’ll need to also install the necessary valve components, such as the shower head, diverter valves, and connecting hoses. You’ll also need to make sure you have the proper plumbing fixtures and tools on hand, such as a pipe wrench, adjustable wrench, and pipe cutters.
Once all the necessary components are in place, the installation is fairly straightforward. It’s a good idea to consult with a professional if you’re unsure of any step.
Can you use a bathtub faucet for a shower?
No, you cannot use a bathtub faucet for a shower. While a bathtub faucet may look similar to a shower faucet, they are designed to work differently. A bathtub faucet is designed to be used with a large bathtub, and the size and shape of the faucet will not accommodate a shower head or provide a powerful flow of water that is needed for a shower.
Furthermore, because a bathtub faucet is not designed to handle the high pressure of shower water, it is not capable of producing the pressure necessary for a satisfying shower experience. Additionally, a bathtub faucet will not be able to provide a wide range of temperatures for a hot and cold shower, which is an essential part of a comfortable and enjoyable shower.
How do I turn my bathtub into a shower without a switch?
If you are looking to turn your bathtub into a shower without a switch, there are a few different methods you can try. One of the simplest is to add a handheld showerhead to your existing tub. By adding a hose and showerhead to the tub spout, you can easily control the water and adjust the pressure and temperature.
This works best for clawfoot tubs, as it does not require any permanent modifications. An additional relatively easy solution is to install a diverter valve. This would be the most efficient way of converting your bathtub into a shower, as it lets you switch between the tub and shower faucet with a simple lever or switch.
The diverter valve needs to be connected to both the cold and hot water supplies and also installed to the wall or faucet with a mounting bracket. Finally, you could also install a shower panel, which would involve removing the existing tub spout and replacing it with a shower panel.
This would allow you to set the perfect temperature and pressure of water, as the controls for each are separate.