Yes, bathroom cabinets come in different heights. Depending on the size of the bathroom, the cabinetry can be customized to fit the design of the room. Typically, a standard counter height is 36 inches, which is the average vanity cabinet height, but a builder or contractor can make customized cabinets to fit any space.
Smaller bathrooms may be best with a minimal footprint, so the vanity could be lower or higher than 36 inches. For larger bathrooms, the width, depth and height of the cabinets can all be customized to fit the desired layout.
Other factors, such as how much storage space you need, can also affect the vanity cabinet size. For example, if extra storage is needed, a taller wall cabinet may be necessary. Ultimately, there are no set rules for what height your bathroom cabinets should be – it all depends on the room.
What is the height of a bathroom cabinet?
The height of a bathroom cabinet depends on a variety of factors, such as the size of your bathroom and the type of cabinets you choose. In general, the average wall-mounted cabinet for a standard bathroom is around 18 to 24 inches high.
If mounted over a vanity, the cabinet will usually measure around 30 to 36 inches tall. Floor-mounted models are generally taller, ranging from 34 to 40 inches high. Overall, it is best to measure the space you have available and then choose a cabinet size to fit.
Are bathroom cabinets the same height as kitchen cabinets?
No, bathroom cabinets and kitchen cabinets are usually not the same height. Generally, bathroom cabinets are designed to be shorter than kitchen cabinets since bathrooms are typically smaller than kitchens, meaning there is less space available for cabinetry.
Whereas kitchen cabinets can range in height from 36” to 42”, most bathroom cabinets are much shorter, usually around 30” to 34”, making it easier to reach items that are stored inside. Additionally, many bathrooms are designed with narrower spaces and doorways, which makes it difficult or impossible to fit full-height kitchen cabinets.
Are bathroom cabinets standard size?
The standard size of a bathroom cabinet can vary depending on the footprint of the bathroom. Generally, bathroom cabinets are between 15 and 36 inches wide, with the sizes ranging between 18, 24 and 30 inches.
You should also be aware of the depth of the cabinet, as cabinets come in various depths of approximately 11, 16 or 23 inches. When choosing a bathroom cabinet, ensure that the height of the cabinet is appropriate for your needs.
Depending on the layout of the bathroom, a standard height can vary from 30-36 inches. Additionally, it is important to consider the tie-in with other fixtures in the bathroom, such as the sink, toilet and shower, ensuring the cabinet fits nicely alongside your other bathroom features.
How tall are stock bathroom vanity cabinets?
The height of stock bathroom vanity cabinets can vary depending on the model and style. Generally speaking, most bathroom vanity cabinets are between 32” and 36” tall including the countertop. To get a more exact measurement for a particular model, you can check the product information before purchasing.
Countertop height is also an important factor to consider when selecting bathroom vanity cabinets. Standard countertop height measures 36” from the floor, but if your bathroom is on the smaller side, you may want to consider looking for a vanity cabinet that is slightly lower than average.
This will help maximize the amount of space in your bathroom while still providing enough space to get the job done. A smaller vanity cabinet can also create a cozier, more intimate space in your bathroom.
Is it easy to replace bathroom cabinets?
Replacing bathroom cabinets is not necessarily a difficult job, but it can be quite time-consuming. It depends on the complexity of the cabinet you are replacing—meaning, how it is installed, the type of materials used, and how it is integrated into the surrounding space.
If you are simply swapping out one cabinet for another and the measurements are the same, the task can be easier, but it can become more complicated if you’re making structural modifications or altering the cabinetry size/style.
It’s always best to consult a professional if you are unsure of the best approach. Additionally, you should ensure you have the necessary tools, materials and supplies on-hand before beginning the project.
That being said, with a bit of patience and following the instructions correctly, it can certainly be done on your own.
Can I use kitchen cabinets to make a bathroom vanity?
Yes, you can use kitchen cabinets to make a bathroom vanity. This is becoming increasingly popular and can give your bathroom an attractive, custom look. When converting kitchen cabinets to use in the bathroom, there are a few key considerations to keep in mind.
First and foremost, make sure you’re using cabinets that are moisture resistant. Kitchen cabinets may not be designed to withstand moisture over time, so look for cabinets with a painted finish, or be sure to seal and paint the cabinets before using them.
You’ll also need to find the appropriate sized vanity top or vessel sink to fit the cabinet size, as well as adding the appropriate faucet and handles. Finally, consider the plumbing needs for sink, toilet and shower.
If you plan your project carefully and make sure it is moisture-resistant, you can easily transform kitchen cabinets into a custom bathroom vanity.
How much does it cost to have bathroom cabinets installed?
The cost of having bathroom cabinets installed will vary depending on a number of factors, such as the size of the cabinets, the materials used, and the complexity of the job. On average, you can expect to pay between $400 and $800 for a basic installation of bathroom cabinets.
More complex installations may cost up to $2,000 or more. For larger jobs with more cabinets, you may need to hire a contractor, which will increase the overall cost. Additionally, you may need to pay the contractor extra to design or build custom cabinets or to replace existing cabinets.
Other costs may include the cost of materials such as paints, finishes, and hardware. To get an accurate estimate for the total cost of installation, it’s best to discuss your specific project with a professional kitchen contractor.
What are the most common dimensions for bathroom base cabinets?
Bathroom base cabinets typically come in one of three most common sizes: 24”, 30”, and 36”. 24” wide cabinets are the most commonly used size by far, due to their compact size that fits well in smaller bathrooms.
30” wide cabinets are a popular choice for medium sized bathrooms, while 36” wide cabinets are most commonly used in large bathrooms with ample space. Standard base cabinet depths range from a shallow 12” to 24”.
18” deep cabinets are the most commonly used, as they provide plenty of storage but do not take up too much space. Taller 18” deep cabinets are also popular for bathrooms with high ceilings, and vanity cabinets with deeper sinks.
Additionally, standard bathroom base cabinet heights range from 30” to 34”. 30” high cabinets are the most popular as they fit underneath most standard sized bathroom countertops. Cabinets that are 34” high are primarily used for floor-to-ceiling installation and provide the perfect height for storing taller items such as jugs and bottles.
Can I use any cabinet in bathroom?
Typically, it is best to choose purpose-built cabinets for bathrooms. As water is used in bathrooms, standard furniture and cabinetry can be damaged due to the moisture and condensation created by hot showers.
Many manufacturers make specialized bathroom cabinets that are designed to better resist moisture from the damp environment. These cabinets can also be constructed of water-resistant materials that are more difficult to damage from moisture.
Many cabinets use surfaces such as laminate or melamine which are not porous and are less likely to absorb moisture and warp in response to water. Drawers, shelves, and hardware in bathroom cabinets also need to be chosen carefully to resist rusting due to moisture exposure.
When in doubt, it is best to consult a home improvement expert or interior designer to ensure that you are getting the right cabinet for your bathroom.
What size is a standard vanity unit?
A standard vanity unit is typically around 600mm-800mm wide, with a depth of 300mm-420mm. The height of a standard vanity unit will depend on whether it is a wall-mounted unit or a floor-standing unit, with typical heights ranging anywhere from 600mm-1200mm and beyond.
Of course, vanity sizes can vary greatly depending on the style, design and manufacturer, so it is important to always check the individual specifications of the vanity in question.
Do you put flooring under bathroom cabinets?
In most cases, it is not necessary to put flooring under bathroom cabinets. Since bathroom cabinets are typically installed against the wall with the bottom slightly lifted off the floor, there should be adequate space for air to circulate beneath the cabinets.
This is important to help prevent moisture and humidity from building up beneath the cabinets, which could lead to mold growth. Having adequate space between the floor and the cabinets also makes it easier to clean and maintain the area.
Even if you choose to install flooring beneath the cabinets, it is important to make sure that any materials used are designed to handle moisture. This may include waterproof vinyl, ceramic or porcelain tile, or other waterproof flooring materials.
Keep in mind that if the flooring is installed below the level of the cabinets, it may need to be periodically scraped and resealed to prevent moisture from seeping through.
Do you install cabinets before or after tile flooring?
When installing cabinets, it is generally best to install them after the tile flooring is in place. The tile provides a more stable and flat surface for the cabinets, resulting in a more professional and secure installation.
Additionally, correctly measuring and leveling the cabinets can be easier to do when the tile flooring is already installed. If the cabinets are installed before the tile flooring, unevenness or gaps in the flooring can make the installation of the cabinets challenging.
If any mistakes do occur, fixing them may be difficult due to the cabinets already being in place. Additionally, when installing cabinetry before the tile, the cabinets may need to be removed to allow for cuts when laying the tile.
This can be time consuming and add to the difficulty of the job. Therefore, it is generally recommended that cabinets are installed after the tile flooring.
In what order should you renovate a bathroom?
When it comes to renovating a bathroom, there are a few things to consider and keep in mind. The following is the suggested order of steps if you are taking on a full bathroom renovation.
1. Start by patching any holes or cracks in your walls and ceilings, and giving them a fresh coat of paint. This will help you create a nice, even surface for the other parts of your renovation.
2. Next, consider your flooring. Removal of the old flooring should be a priority, as this will provide a clean workspace to work with. You can then install new flooring of your choice.
3. The third step is to replace any plumbing and electrical elements in the room. This is important for safety reasons and should be handled by a professional if you are unfamiliar with the work.
4. The fourth step is to update any fixtures or elements in the room that you want or need to change. This is a great time to switch up the sink and tub/shower, if desired.
5. Finally, you can update the walls with tile or wallpaper, accessorize, and add any finishing touches. This is where you can get creative and make the bathroom your own.
Overall, when renovating a bathroom, the key is to take your time and get in the right order. If you do your research and plan ahead, you can create a beautiful, functional bathroom that you can feel proud of.
Can you put a vanity on top of laminate flooring?
Yes, you can put a vanity on top of laminate flooring. It is important to use the appropriate type of sealant to make sure the vanity is properly secured and the flooring beneath is protected from moisture.
You should also inspect your existing laminate flooring for any visible damage, and make necessary repairs to it before installing the vanity. If the damage is extensive, you may need to replace the laminate flooring before installing the vanity.
If you are replacing your laminate flooring, it is best to use a thicker product and then add a foam underlayment underneath it for extra stability and protection. When installing the vanity on top of the laminate floor, make sure to use heavy-duty screw anchors and brackets to ensure a secure fit.
If you are uncertain about the installation process, it is best to consult a professional contractor for assistance.