Yes, it is possible to remove and install a toilet yourself. However, there are certain steps you will need to take to do it correctly and safely. To begin, you will need to make sure that you have a replacement toilet and all of the necessary supplies and tools.
This includes a wrench and a putty knife to remove the old toilet, and a new supply line, wax ring, bolts, closet bolts, and putty for installing the replacement toilet. You will also need to ensure that the water shutoff valve is closed before disconnecting water from the tank.
Once you have all of your supplies, the first step is to disconnect the water supply and flush the tank. Next, you will need to unscrew the closet bolts that are holding the toilet to the floor, and then use the putty knife to loosen the wax seal.
Then, you will need to carefully lift the toilet off of the bolts and gently place it aside. To install the new toilet, you will need to attach the new wax ring, position the toilet correctly on the bolts, and then use the wrench to securely attach the supply line.
Lastly, you will need to reattach the closet bolts and turn the water supply back on. If everything is done correctly, your new toilet should be installed and ready to use.
Can one person lift a toilet?
Yes, it is possible for one person to lift a toilet. However, depending on the size, material, and type of the toilet, some may require a great lifting effort. It is recommended to enlist the help of someone else, as it can be more difficult to lift a heavy toilet alone.
Before attempting to lift a toilet, use the proper safety precautions including wearing the right protective gear, such as work gloves, eye protection, and closed-toe shoes. Additionally, the area behind the toilet needs to be cleared so one can have enough room and leverage to lift the toilet.
Can you install a toilet without a plumber?
Yes, it is possible to install a toilet without a plumber. To do it, the first step is to turn off the water supply and flush the toilet to empty the tank and bowl. Then, the old toilet must be removed and the flange should be checked for any damage or need for adjustments.
Next, the new toilet must be put in place, following the manufacturer’s instructions. The wax ring should also be replaced to create a watertight seal. Then the toilet must be sealed to the floor and the water supply should be reconnected.
Finally, the toilet tank must be filled, and the toilet should be tested to make sure it works properly. It is important to remember that some areas require a permit in order to install a toilet, and a licensed plumber should be consulted if any plumbing regulations need to be followed.
Do you need a professional to install a toilet?
Yes, it is generally recommended to have a professional install a toilet. This is because a lot of knowledge, skill and experience is typically required in the installation process. Professionals will know the best skills, tricks, and safety measures to ensure that the toilet installation is done correctly and that it will last for a long time.
Additionally, it is important to have an experienced plumber install the pipes and connections in order to avoid any issues with water leakage or improper drainage. Professional installers are also more likely to be familiar with local codes and can ensure that the installation meets all of the required standards.
Hiring a professional installer can save you time, money, and frustration in the long run in order to guarantee a successful and safe installation.
How much does it cost to install a new toilet and remove the old one?
The cost of installing a new toilet and removing the old one varies depending on the project scope and the type of toilet being installed. Generally, the cost of a mid-range toilet installation with removal of the old one can range anywhere from $200-$400 depending on the type of toilet and difficulty of installation.
This price range includes the cost of the vanity, supply lines, and the labor for installation. If additional plumbing costs are required, such as additional supply lines or a new waste line, then the price will likely be higher.
Additionally, costs could be further increased if additional demolition of the old toilet is required. Another significant cost is the cost of the toilet itself. Toilets range from basic models that can be installed for under $200 to high-end models that can cost several thousand.
Therefore, it’s important to research and decide the type of toilet that best suits your needs and budget.
How do you change an old toilet to a new one?
Changing an old toilet to a new one is relatively straightforward, but it will take time, patience, and some basic understanding of plumbing. First, shut off the water supply to the toilet either at a shut-off valve near the toilet, at the main shut-off valve, or the street valves located outside your house.
You may want to drain the water by flushing the toilet. Disconnect the water supply line. Then remove the two nuts that connect the toilet to the floor at the base of the toilet. Carefully lift the toilet off the floor and then remove any remaining wax or plumbing tape that connects the toilet to the floor.
Next, clean the area where the old toilet was located. Apply plumbers putty or silicone to the base of the new toilet and place the toilet on the floor or over the flange in the same spot as the old toilet.
Secure the new toilet to the floor by reattaching the rear bolts and nuts. Hook up the water supply line to the new toilet and turn the water back on.
Finally, open the water valve, flush the toilet several times, and carefully inspect for any water leaks. If there are any water leaks, you’ll need to adjust the connections with your adjustable wrench and retest the connections.
Once all the connections have been sealed and the toilet is secure, you’re all finished. Congratulations!.
How long does it take to take an old toilet out and put a new one in?
Depending on the type of toilet you have, the difficulty of the job, and the number of plumbers involved, replacing an old toilet with a new one can take anywhere from a few hours to a full day. The estimated time can also be affected by the parts needed, the condition of the plumbing in the area, and the difficulty of the job.
Generally, the first step should be to turn off the water valve and flush the toilet to empty the tank. The actual toilet can then be removed, and the new one installed in its place. Depending on the shape of the area where the toilet is located, some items may need to be moved to give the plumbers space to work.
Finally, the water supply line should be installed, toilet leveled and sealed, and tested for proper flushing and filling.
How much does Home Depot charge for installing a toilet?
The cost to install a toilet from Home Depot varies significantly depending on the type of toilet being installed, the features included, the difficulty of the installation, the tools and materials needed, and local labor rates.
On average, the cost to install a toilet can range anywhere from $200 to $600. Home Depot offers both basic installation where the customer provides the supplies or extended services where Home Depot provides the supplies.
Some of the additional costs associated with the extended services may include additional parts or plumbing materials, disconnecting and preparing the existing plumbing area, caulking, sealing, and accommodating any non-standard toilet connections.
Before your installation, a Home Depot professional will work with you to understand the project and provide an estimate of the cost. Prices from store to store may vary, so it’s a good idea to call ahead for a more accurate price quote.
What is the going rate for replacing a toilet?
The cost to replace a toilet can vary greatly depending on the type of toilet, installation costs, and any additional materials (e. g. a new seat or flapper) that are required. Basic toilets can start around $125-$250, while higher-end models cost upwards of $500-$800.
Installation costs can range from $75-150 depending on the complexity of the job and any additional work needed. For example, a replacement with minimal work can cost as low as $175 but if water lines need to be moved or if the floor needs to be reinforced, the cost can go up to $400 or more.
Additionally, many toilets come with a limited manufacturer warranty, so it’s important to review the warranty terms in order to determine if the replacement costs will be covered.
Is it worth it to replace old toilet?
Overall, it is definitely worth it to replace an old toilet as doing so will provide multiple benefits. With a new toilet, you can enjoy improved efficiency, cleanliness and convenience. In terms of efficiency, new toilets will use less water with each flush, which can mean a reduced water bill and a smaller carbon footprint.
Cleanliness is improved as well as newer models are more resistant to staining and deposits than older ones. Finally, modern toilets often have additional features such as self-cleaning and hands-free operation that can make using the toilet more convenient and hygienic.
Replacing an old toilet also has other benefits, such as improved aesthetics and a fresh, modern look for your bathroom. These both add to the value of your home and increase the satisfaction you will have when using your bathroom.
Ultimately, the cost of replacing an old toilet is often well worth it, as the improvement in efficiency, convenience, and aesthetics can be quite substantial.
How long does a plumber take to change a toilet?
The amount of time it takes for a plumber to change out a toilet can vary based on the type of toilet and the complexity of the installation. Generally speaking, changing out a toilet should not take more than a few hours for an experienced professional.
However, if the installation is more complex—including replacing an old toilet with a new one that is a different make and model, or if unforeseen problems arise—it may take longer. In these cases, a more experienced plumber may be needed.
Additionally, if any plumbing fixtures or pipes need to be moved, the installation process may become more complicated, and therefore take longer.
How many years does a toilet last?
A toilet can last anywhere between 10 to 30 years. Depending on the type, quality and care of a toilet, it may last up to 30 years with regular maintenance. Low-end models may last only 10 years with less maintenance.
Factors that influence the life expectancy of a toilet include the water pressure and chemical content of the water, the flushing mechanism, and the size of the tank. All of these elements should be considered when investing in a toilet, as well as the frequency of how often it’s used.
Is it better to rebuild a toilet or buy a new one?
The answer to this question will depend on a few factors. Firstly, you should consider the extent of the damage that the toilet has sustained. If there are only minor repairs that need to be made, such as a slight crack in the porcelain or a broken flush handle, then it may be better to rebuild the toilet.
These types of repairs can usually be done relatively quickly and are more cost-effective than buying a new toilet.
You should also consider the age of the toilet and the availability of parts. If the toilet is several years old and the parts are no longer widely available, you may want to consider investing in a new model.
It is worth looking into both the availability and the cost of any potential parts, so you can make an informed decision.
Overall, it is up to you to decide if you want to rebuild your existing toilet or purchase a new one. Making an informed decision based on the extent of the damage and the age of the toilet will help you find the best solution for your scenario.
Do new toilets come with everything?
It depends on what you mean by “everything. ” Generally speaking, new toilets will include the toilet bowl and the toilet tank, as well as the seat and lid. They may also include items like a wax or rubber ring for installation, mounting hardware, and a supply line.
However, other items like a shutoff valve, water supply line, and any decorative items (such as a tank cover or seat cover) may need to be purchased separately. Depending on the style of toilet you choose, additional items like a flushometer for flush valves, a flush handle for tank levers, an arm for wall-hung toilets, and any other specialty items may also need to be purchased separately.
What is better a one piece toilet or two piece toilet?
This is a matter of personal preference. A one-piece toilet has the toilet and tank attached together, making it easier to clean and less of an eyesore as there is no awkward seam in between. Additionally, it takes up less space and can give a more streamlined look to the bathroom.
A two-piece toilet, on the other hand, provides more flexibility for placement, since the tank and bowl are separate parts and can be placed farther apart or separated into different rooms. It is also typically less expensive.
Ultimately, which toilet is better depends on your individual space configuration, budget and personal preferences.