Yes, wall hung toilets can sometimes be problematic. The most common problems associated with wall hung toilets include leaking around the seal of the toilet, warping and cracking of the toilet seat, installation issues, and in some cases even instability due to poorly installed brackets.
Leaking is often caused when the seal between the toilet and the wall is not properly installed. Warping and cracking of the toilet seat can be exacerbated by humidity or heat, if either of these factors is not taken into account during installation.
These can all cause costly blows to the homeowner in terms of both time and money.
When considering whether to install a wall hung toilet, it is important to research the circumstances to ensure that it is the best option for your needs. If the installation is done properly, wall hung toilets can make a great addition to any bathroom due to their contemporary style and the higher level of hygiene.
It is also important to research the toilet itself to ensure that it is designed for the environment in which it is intended for use. For example, wall hung toilets may not be suitable for use in a wetroom.
Ultimately, if you are considering installing a wall hung toilet, it is important to be aware of the potential issues that can arise, and to make sure you understand how to properly install and maintain the toilet in order to avoid costly repairs and replacing it in the future.
Can wall-mounted toilets fall?
No, wall-mounted toilets are securely attached to the wall and aren’t likely to come down on their own since they are typically attached with several bolts and screws. Additionally, most wall-mounted toilets include the mounting frame, which is designed to provide additional structural support and stability to the toilet.
But it is best to ensure that wall-mounted toilets are properly installed and secured with the right number of bolts to the wall studs for maximum safety. In the unfortunate event that a wall-mounted toilet does come loose, it’s essential to hire a professional to assess the wall’s structural integrity and determine whether reinforcing the wall is necessary before reinstalling the toilet.
Which is better wall-mounted toilet or floor-mounted toilet?
The decision between a wall-mounted toilet or a floor-mounted toilet depends on the needs of the installer and the space available in the installation area.
Wall mounted toilets generally take up less space than floor-mounted toilets, while often offering the same or similar features. Wall mounted toilets are considered to be more aesthetically pleasing, since the toilet tank is completely concealed with a wall.
Wall mounted toilets are also slightly easier to keep clean due to the lack of area around the toilet on the floor that could become dirty. On the other hand, wall mounted toilets generally cost more than floor-mounted toilets.
They are also more difficult to install and require professional help to do so.
Floor mounted toilets are usually more cost effective and are usually easier to install than a wall mounted toilet. They also take up more space than the wall mounted toilet, and may be more versatile in certain installations.
Floor mounted toilets usually come with a tank that is visible from the outside, making them appear a bit more traditional than wall mounted toilets. Because the tank is visible, it makes for easier repairs should any parts need to be replaced.
Floor mounted toilets also typically have a slightly lower cleaning burden since the toilet is slightly further away from the wall, allowing for easier access.
Ultimately, the decision between a wall-mounted toilet or a floor-mounted toilet will come down to the needs of the installer, the size and shape of the installation area, and the budget that is available.
Either can be a viable option, but it’s important to consider all of the factors before making a final decision.
Is there a weight limit on wall hung toilets?
The answer to this question is that it depends largely on the type of wall-hung toilet you have. Generally speaking, most wall-hung toilets can support up to 400 lbs. However, there are some that are rated for higher, up to 500 lbs, and others for less, as low as 250 lbs.
It is important to check the manufacturer specifications to know for sure what the weight limit is for your specific toilet model. Additionally, when installing a wall-hung toilet, it is important to use mounting hardware rated to support the total expected weight of the toilet, including the user, any items that might be placed on the toilet, and the toilet itself.
You should also make sure that the walls and surrounding area where you’re mounting the toilet are adequately reinforced to support the weight of the unit and its user.
Are back to wall toilets a good idea?
Back to wall toilets are a great idea for bathrooms, as they provide a modern, streamlined look and provide more space for design and decorating. This look has become increasingly popular in many households, as it creates a luxurious, spa-like feel, while also being low maintenance and easy to clean.
Back to wall toilets also help to keep the bathroom looking neat and organised, while also improving hygiene. Additionally, they can help to conserve space, as the walls hide the toilet’s pipework. As a result, a back to wall toilet can be a great solution for both large and small bathrooms alike.
The fact that the toilet’s paper holder can also be incorporated directly into the wall further contributes to its modern, clutter-free look.
When should you use a wall mounted toilet?
Wall mounted toilets, also known as lightweight suspended toilets, are often the preferred toilets for modern bathrooms due to their contemporary and sleek style. They are installed with the cistern and flush plate installed onto the wall above the toilet itself, providing a much cleaner and streamlined look than a traditional close-coupled toilet.
When deciding on whether to use a wall mounted toilet or not, there are a few factors to take into account. Firstly, they require accurate measurements and a heavy-duty fixing such as wall plugs and screws to ensure a safe and secure installation.
It may also require that the wall can support the weight of the toilet cistern, helping to make a wall mounted toilet the right choice for a modern bathroom.
Aside from the aesthetic benefits, wall mounted toilets can make it easier to keep your bathroom clean and hygienic. This is due to the absence of a ‘base’, which makes it easier to reach corners and access areas around the bowl when cleaning.
In short, when carefully installed, wall mounted toilets can provide a contemporary style to your bathroom and help to make cleaning much simpler.
Which toilet style is best?
When selecting a style of toilet, it is important to consider both function and appearance. A good place to start is to think about the design of the bathroom, as well as the kinds of fixtures that are already in place.
A contemporary bathroom would generally be better suited for a modern or sleek design, while a more traditional or antique look would benefit from an older-style toilet.
Another factor to consider is size and shape. Round toilets are often a popular choice, as they can fit into smaller spaces than their elongated counterparts. Elongated toilets are more comfortable and provide more coverage range, while corner toilets are ideal for bathrooms with limited space.
The fixture’s flushing system is also important. Pressure-assisted models tend to be the most powerful, using both water pressure and gravity to flush waste. Gravity-fed models tend to be fairly standard and can also provide a strong flush.
Finally, low-flow toilets are good for conserving water.
Ultimately, the best toilet style will depend on personal preference and how it fits into the design of the bathroom. There are a variety of options available, so it’s important to carefully weigh the pros and cons of each before making a decision.
Why are public toilets wall-mounted?
Public toilets are wall-mounted to ensure they remain hygienic and secure. The toilet is fixed to the wall in order to prevent it from being moved, tampered with or damaged. This also makes it more difficult to access the plumbing system, reducing the risk of damage and tampering with the pipes or other components.
Wall-mounted toilets also tend to be easier to clean. They are less likely to become stained or damaged, as the bowl is typically elevated off the floor and is therefore much easier to reach for precision cleaning.
Wall mounted toilets also tend to be more aesthetically pleasing, as they blend into the wall and create a seamless and tidy bathroom design.
How far can a toilet drop vertically?
The maximum safe drop for a toilet can vary, but typically it’s about 12-18 inches. This includes the height of the flange, which typically sits about an inch above the finished floor, so that means the distance between the trap outlet (the bottom of the waste pipe coming out of the wall that the toilet is attached to) and the floor should be no more than 11-17 inches.
Anything higher might cause a siphoning effect, resulting in a slow-flushing toilet, among other issues. It’s also important to note that you should never intentionally drop a toilet below the options available from the manufacturer.
If the trap outlet is too high or the floor is too low, special accommodations must be made to ensure a proper seal and still achieve the correct drainage slope.
How do you stop a toilet from hitting the wall?
The most effective and straightforward way is to install a new toilet that is designed to fit the space more effectively. If it is impossible to do so, other options include installing a toilet flange extender or spacers to raise the toilet to the optimal height.
Additionally, you can use a shim kit to hold the toilet in place and stop it from hitting the wall; these kits come with thin pieces of plastic that will slide between the floor and bowl, re-leveling the toilet and helping to stop it from banging against the wall.
You should also check the bolts on the toilet to ensure they are properly secured, as this can also contribute to toilet banging. Additionally, be sure to check the water supply line, tank bolts, and both wax rings to ensure everything is securely connected and properly sealed.
Finally, check the closet bolts and make sure they are properly tightened if the toilet is still banging against the wall.
Are toilets supposed to be bolted down?
Yes, toilets should be bolted down to the floor for several reasons. First and foremost, it prevents the toilet from shifting when it is in use, as this can cause leaks in the plumbing. Second, bolting the toilet to the floor helps keep it from being knocked over by external forces, such as a child playing in the bathroom or an animal that jumps up onto the toilet.
Finally, it’s necessary to bolt the toilet down to enable the wax ring to form an adequate seal with the floor, preventing water damage in the room below. There are a variety of bolts available, such as lag bolts, concrete anchors, and T-bolts, that can provide an appropriate level of security, whatever the surface is beneath the toilet.
When securing the toilet, be sure to follow the instructions provided by the manufacturer.
What are the disadvantages of wall mounted toilet?
One of the main disadvantages of wall mounted toilets is the difficulty of installation. This type of toilet must be securely mounted to the wall, which can be a challenging task for even the most experienced and knowledgeable do-it-yourselfers.
Additionally, it is necessary to run a water supply line and a drain for the toilet, which can involve complex plumbing and costly repairs.
Another disadvantage of wall mounted toilets is the lack of stability. Since the toilet is not connected to the floor, there is a risk of it becoming unstable and potentially moving or shifting if it is not installed properly.
This could present a safety hazard, especially in households with children and pets.
The cost of a wall mounted toilet is typically higher than the cost of a floor-mounted toilet due to the additional labor involved with installation. This type of toilet is also more expensive to repair since a plumber may need to be called in if anything goes wrong.
Lastly, there may not be adequate room on a bathroom wall to mount a wall-mounted toilet, making it difficult to install in a space-challenged bathroom.
Can you be too heavy for a toilet?
Yes, it is possible to be too heavy for a toilet. There are certain factors to consider when determining if someone is too heavy for a toilet, such as the type of toilet and the weight limit of the material it is made from.
Some toilet seats, in particular, have a documented recommended weight limit due to the fact that they can bend or break if the weight is exceeded. Additionally, toilets are made from different materials, with some being stronger and more durable than others.
For example, a traditional gravity toilet with a plastic seat may be able to handle more weight than a more modern and smaller low-flow toilet with a thinner lid. In the event that a person is too heavy for the toilet, it is recommended that they look for options such as a taller bowl, a wall-mounted toilet, or a toilet specifically designed for people with a higher bodyweight.
Ultimately, it is important for people to consider their weight and the type of toilet before installing or purchasing it to ensure that it can handle the weight.
What weight can a standard toilet take?
The weight capacity of a standard toilet depends on the product and its features. Generally, most toilets can hold up to 1,000 pounds of weight, however, some may hold up to 1,500 pounds. It is important to look at the product documentation to determine the exact capacity of the toilet and consult a professional installer to make sure it is properly installed and able to handle any weight.
When it comes to installation, the toilet should be placed on a sturdy and level surface, such as the floor or when it is mounted to the wall must be securely fastened with thick hardware. Taking these measures ensures that the toilet is actually able to hold the weight it is meant to hold.
Additionally, if the toilet is located next to higher cabinetry, more securing may be necessary to ensure stability.
How much weight does it take to break a toilet?
It is hard to answer this question without knowing the specific make and model of the toilet, as well as the composition of the material used to construct it. In general, most standard household toilets are designed to withstand a maximum weight of 400-500 pounds.
This weight limit should be sufficient to support most family members and guests. However, if the toilet bowl or tank is made of a more fragile material, such as porcelain or ceramic, the weight limit may be lower.
Additionally, if the toilet was poorly installed, the weight limit could be even lower. In any case, attempting to exceed the design weight limit of the toilet is not advised as it could damage the toilet and cause additional plumbing problems.