No, not all toilets are standard fit. The fit of a toilet that is required for a particular install depends on a number of factors, such as the size of the bathroom, the style of the bathroom, and the height at which the toilet needs to be placed.
In many cases, a standard toilet may fit, but in other cases it may be necessary to purchase an additional bowl and/or tank for a larger, elongated, or comfort-height toilet for the space. Depending on the bathroom size, it may even be necessary to consider a wall-mounted toilet.
Additionally, some toilets may require additional adjustments or adapters, such as a brass shim plate or wall-mounted flange, depending on the type of installation. Ultimately, it is important to consult a professional to ensure the proper installation of the toilet.
How do I know if a new toilet will fit?
If you are buying a new toilet, you need to make sure that it will fit in your bathroom. The first thing you should do is measure the space you have available. Measure the length, width, and height of the area where the toilet will be installed.
You will also need to make sure that there is enough space for a flange to be installed. You should also make sure that the water supply line will fit. All toilets will come with their own specific measurements, so make sure to take those measurements into account when deciding what toilet to buy.
Most toilets will also come with a template that you can use to make sure the toilet will fit before you make a purchase. Taking the time to do your research and make sure the new toilet will fit can save you time and frustration in the long run.
How do I know if my toilet is a standard size?
To determine if your toilet is a standard size, you will want to measure the rough-in distance, which is the distance from the back wall to the center of the closet bolts. Standard toilet rough-in size is 12 inches, which is the most common size for bathrooms.
If your measurement is 12 inches, then your toilet is a standard size. You can also measure the toilet bowl overall length, width, and height to make sure they are consistent with standard sizes. Length should be in the range of 16 ½ to 28 ½ inches, width around 14 ½ to 18 ½ inches and height around 15 to 19 inches.
This should give you enough information to determine if your toilet is a standard size.
Can you replace a 10 inch rough-in toilet with a 12 inch?
Yes, it is possible to replace a 10-inch rough-in toilet with a 12-inch rough-in toilet. However, it is important to ensure that the flange is in the correct location before the swap is completed. If the flange is not in the correct location, the replacement will not work.
Additionally, it is important to make sure that the rough-in measurement is accurate. The rough-in measurement should measure from the wall behind the toilet to the bolts that fasten the toilet to the floor.
If this measurement is 12 inches, then the toilet will be compatible with the 12 inch rough-in. It is important to note that the 12-inch rough-in may require a larger unit to fit and an additional flange extension ring may have to be purchased.
Additionally, deeper mounting hardware may need to be purchased to ensure a secure installation. Lastly, buyers should always double-check their measurements and ensure that the 12-inch toilet will fit in the area.
This is also important for measuring against any obstacles that may be in the way, such as walls, doors, and pedestals.
Do all toilets fit the same flange?
No, toilets do not all fit the same flange. Generally, the flange used to install a toilet is determined by the type of flooring that it is being installed on. For example, toilets installed on concrete floors typically use a rubber gasket and metal or plastic flange combination.
This is due to the strength and ability to resist water these materials provide. On the other hand, vinyl, linoleum, and tile flooring generally require a wax ring and plastic flange combination. With this flange combination, the wax ring helps to seal the toilet and prevent any seepage in to the floor while the plastic flange is used for the toilet bolt support.
Additionally, the toilet bowl itself does not always fit the same flange. Toilet bowls come in various sizes and shapes, each designed for specific needs and scenarios. Some manufacturers may even design flanges specifically for one of their own toilet models, making it difficult or impossible to swap the flange with another toilet.
Do toilets fit universally?
No. Toilets do not fit universally. Toilets come in a variety of shapes and sizes so it is important to measure and select one that fits perfectly in the allotted bathroom space. Different factors can affect the type of toilet that is needed.
These include the shape of the bowl, the seat height, the amount of water it uses per flush, etc. Before making a purchase, it is important to measure the space available in the bathroom accurately and invest in a product that is suitable for the area.
An incorrectly sized toilet can lead to a range of problems, such as water flooding the bathroom. It is always best to check the measurements before purchasing a product to make sure it is compatible.
Are all toilets the same size on the floor?
No, not all toilets are the same size. Toilets vary in size depending on the type, brand, and style of the toilet. For example, standard toilets are usually 12 inches long by 14 inches wide, but compact toilets may be as small as 10 inches long by 12 inches wide.
The standard bowl height may also vary depending on the type of toilet. Comfort height toilets are typically two to three inches taller than a standard toilet, and ADA compliant toilets have an even taller bowl height.
Additionally, the flush valve hole may differ between toilets for standard, dual, and pressure-assisted varieties.
What does 12 inch rough-in mean when installing a toilet?
12 inch rough-in refers to the distance from the wall behind the toilet to the center of the outlet pipe (also known as the closet flange). This measurement is critical in order to correctly install a toilet and is typically 12 inches, although it can sometimes vary depending on the type of toilet and flange being installed.
When considering what size toilet to install, it is important to measure the rough-in so that you can make sure the toilet bowl is within the rough-in measurements. If not, the toilet bowl will have to be moved to accommodate it or the rough-in will have to be adjusted.
Why would I want an elongated toilet bowl?
An elongated toilet bowl provides a more comfortable experience than a standard round bowl. Because of its added length, it provides increased seating space and is better suited for taller people. It also provides the user with a more comfortable feeling of being fully supported front to back when sitting, helping to reduce pressure on the user’s legs and back.
Elongated bowls also typically have a larger water surface area, which helps reduce the likelihood of clogs. Additionally, they typically have a side-mount flush with a bigger flush valve, helping to move more waste with each flush.
This not only makes them more efficient, it also means they’re less likely to clog and need fewer repairs. All in all, an elongated toilet bowl can provide a much more comfortable and efficient experience for the user, especially for those who are taller or potentially have mobility issues.
What do I need to know before buying a toilet?
Before buying a toilet, it’s important to do your research and consider a few key factors. First and foremost, it’s important to assess your needs and choose the right style and size for you and your bathroom.
You should consider how many people will be using the toilet, whether you need a two-piece or one-piece model, the size and design of the toilet, and how it will fit in the bathroom space. You should also think about water efficiency, considering what type of flushing system the toilet has and how much water it uses.
It’s important to research the different features that various toilets can provide, such as features such as comfort-height seating, easy-to-clean surfaces, and bidet functionality. Additionally, consider the materials of the toilet, such as porcelain, plastic, and/or ceramics.
Finally, think about the price of the toilet and the warranty being offered to ensure that you are getting a quality product at a good price that is covered by the manufacturer.
Is replacing a toilet easy?
Replacing a toilet is not an overly difficult process, but it can be a bit time consuming and require some basic plumbing skills. If you have no experience in plumbing, you may want to consult with a professional plumber to ensure the job is done correctly.
When you have the necessary tools, the process begins with turning off the water and draining the tank by opening the valve or flapper. It’s also important to disconnect the water pipe and the toilet flange that bolts the toilet to the floor.
It’s then necessary to remove the old toilet, making sure that all the fastenings and seals are completely removed. A new wax ring is needed to properly connect the new toilet to the floor flange. When the toilet is correctly positioned, the tank and bowl are connected with bolts.
Make sure to use a generous amount of sealant on the bolts and gaskets to ensure a watertight seal. Finally, turn the water back on, fill the tank and flush the toilet to verify its proper operation.
How do I know which toilet to buy?
The best way to decide which toilet to buy is to first consider the size of the bathroom and choose one that will fit comfortably without compromising the décor. Make sure to also account for any fixtures like cabinets or shelves that may extend into the space when measuring.
Once you’ve identified what size is best suited for your space, you’ll need to decide whether you prefer an elongated or round toilet bowl. Elongated bowls take up more space but offer more coverage, making them the preferred choice in larger bathrooms while round bowls are ideal for smaller spaces.
When it comes to selecting the best model, you’ll need to weigh the pros and cons of each type. For instance, a low-flow toilet uses less water, but may require more flushes to do the job. Commercial-grade toilets are designed for heavy use, but may be more expensive than standard residential models.
Finally, read reviews and ratings for models you are considering to get a better idea of their long-term performance.
What is a 12 inch toilet?
A 12 inch toilet is a height-based designation for a toilet. While toilet manufacturers currently use more specific measurements for detailing the toilet’s height, typically toilets are grouped into 3 categories: Standard, Comfort and Universal (also known as ADA compliant).
A 12 inch toilet is classified as a Standard Toilet, meaning that it measures roughly at 12 inches from the floor to the top of the bowl. This is a taller model than the traditional 10-13 inch Comfort Toilets, and a smaller model than the Universal Toilets, which measure 17-19 inches in height.
While a 12 inch toilet is usually shorter than other models, there are many benefits to this collection. For example, Standard Toilets are designed to provide a larger distance between water trap and the seat, resulting in improved comfort.
Additionally, this type of toilet is also often seen as more convenient. They are designed with bowl-height that fits with the natural shape and size of the user, reducing unnecessary strain on the body and making it easier to use.
Standard Toilets, including those of the 12 inch variety, can be found in many styles and designs. From traditional to modern, these toilets can be ideal for any bathroom space.
What is standard toilet from wall?
A standard toilet from wall is a toilet which is usually mounted on the wall to save space. This type of toilet is commonly found in smaller bathrooms, such as powder rooms or en suite bathrooms, where space is limited.
Standard wall-mounted toilets are typically made of porcelain and come with a typical bowl-shaped design, but there are also tankless versions available which are becoming increasingly popular.
One of the main benefits of a standard toilet from wall is that it helps to make the most of the space that’s available in a smaller bathroom, as the toilets are mounted to the wall and do not require the extra space for a tank.
Additionally, the absence of a tank makes these types of toilets easier to clean and maintain, as there is less surface area for dirt and debris to accumulate.
When choosing a standard wall-mounted toilet, it’s important to consider the style of the toilet to ensure that it complements the overall design of the bathroom. Additionally, wall-mount toilets are available with a range of different heights to suit the user’s preference.
How far should a toilet be from the wall?
The standard recommendation for the distance between a toilet and the wall is approximately 12 inches (30 cm) from the center of the toilet bowl to the wall. When installing the toilet, make sure the distance is measured from the center of the bowl.
A toilet should also be 12 to 14 inches (30 – 35 cm) away from any surrounding fixtures and walls. The minimum distance is two inches (5 cm) and should include space to effectively clean the area, including the wall and the underside of the bowl rim.
Additionally, when choosing a location for the toilet, make sure there is enough space near the bowl for a comfortable seated position when using the toilet.