I paid a total of $6,900 for my Bath Fitter. This covered the cost of the new bathtub and the installation services. The tub cost $3,600, while the installation services amounted to $3,300. This included the removal of the old tub, assembly and installation of the new one, and caulking around the new tub for a waterproof seal.
I was satisfied with the cost, as it was much less than the alternative costs of a full bathroom renovation. The ease of installation and the quick turnaround time were also positive aspects that made this a convenient and economical choice.
What is the average cost of a Bath Fitter conversion from tub to shower?
The average cost of a Bath Fitter conversion from a tub to a shower is between $3000 and $5000. The cost will vary depending on the type of materials used, the complexity of the installation, and the size of the enclosure.
Additionally, some existing walls and floors may need to be reinforced, and many municipalities require a building permit for a job of this scale, which could drive up the cost. Once you factor in the cost of the tub, shower doors, as well as any necessary accessories such as shelving, bench seating, and fittings, the total cost can quickly add up.
How much does a Bath Fitter tub liner cost?
The average cost for a Bath Fitter tub liner is around $1,200 to $3,000. The exact cost will vary depending on factors like the size and type of the bathtub, the type of supplies and installation needed, and the chosen components.
This cost range typically covers the complete installation process, which may include removing the old tub and liner, installing the new liner and the necessary materials such as caulk, screws, and sealants.
It may also cover repair or restoration of the bathtub’s surface. Additionally, there may be additional labor costs for tasks like moving a large tub or one that is difficult to access, as well as for labor to fill and secure the new liner.
Furthermore, you may need to purchase accessories such as handles, non-skid covers, or a new faucet, which could further increase the total cost.
What is an alternative to Bath Fitter?
An alternative to Bath Fitter would be to hire a professional contractor. Using a licensed contractor provides an opportunity for customers to customize their project to fit their unique needs and wants.
Customer service overall typically tends to be better when working with a contractor as they can give you their undivided attention. Additionally, they may be able to provide more cost efficient solutions than standard Bath Fitter products.
Ultimately, it all depends on the customer’s needs and wants in terms of the type of renovation they are looking for. Despite the possible higher upfront costs for hiring a contractor, it can save customers money in the long run.
Professional contractors may be able to find more cost-effective materials, since they have access to more options than Bath Fitter. The contractor can also provide a more customized design that fits the particular size, shape, and style of your bathroom.
Of course, you should always make sure to look for a contractor that is experienced, licensed and insured to ensure quality work.
Does mold grow under Bath Fitter?
It depends. Mold can’t actually grow without the presence of water or moisture. Bath Fitter products are made of a dense polymer material that is highly resistant to mold spores penetrating, but if there are high levels of moisture or water around it could lead to mold growth.
Properly maintaining the area around your Bath Fitter tub, such as making sure there is proper ventilation and no standing water, will help minimize any potential for mold growth. Additionally, good housekeeping practices, such as cleaning and drying surfaces, can aid in the prevention of mold growth.
What is the difference between Bath Fitter and Rebath?
Bath Fitter and Re-Bath both offer bathroom remodeling solutions. The main difference between the two companies is the product and installation process.
Bath Fitter offers a unique one-day installation process for their bathtubs, showers, and liners. They measure each bathroom’s existing fixtures and create a custom liner specifically tailored to make a perfect fit.
This liner is then installed over the existing tub/shower, creating a like-new bathtub. Bath Fitter also offers replacements and upgrades to existing fixtures such as showers, shower doors, toilets and bathroom vanities.
Re-Bath offers a different approach to bathroom remodeling and installation. They have a variety of products including bath and shower liners, wall surrounds, shower doors and customized replacement baths.
Re-Bath works in three easy steps, starting with a free in-home consultation. During the consultation, a Re-Bath representative will measure the existing bathroom fixtures and provide a product recommendation based on the desired look.
The representative also offers a no-obligation quote for the project. After the consultation, the products will be ordered and assembled into a kit. The kit is then delivered to the home, and a Re-Bath representative will come to the home and install the new fixtures.
Overall, both Bath Fitter and Re-Bath provide efficient and effective bathroom remodeling solutions. While the products are similar, the installation processes are quite different. Bath Fitter offers a one-day installation process, while Re-Bath requires a more customized approach.
Can you use magic eraser on Bath Fitter?
It is not recommended that you use a magic eraser on Bath Fitter products. Magic erasers generally contain abrasive chemicals that can cause harm to the material. This is especially true with Bath Fitter products, which are often made of acrylic materials.
To preserve the quality and longevity of your Bath Fitter products, it is advised to only use non-abrasive cleaners that have been approved by Bath Fitter.
Does Bath Fitter go over existing tile?
Yes, Bath Fitter can go over existing tile in certain situations. In most cases, they are able to fit existing tiles up to nine inches thick. However, it is important to note that in certain cases they may need to replace some existing tiles, or they may need to remove them in order to provide a better fit.
Additionally, they will always seek to preserve as much of the existing tile as possible to limit any damage that taking tiles out might cause. When coming up with your bathroom designs, it is important to consider any existing tiles and discuss them with a Bath Fitter representative.
They will then be able to advise you on the best plan of action.
Can I do Bath Fitter myself?
No, Bath Fitter products are designed to be installed by professionals. All Bath Fitter material and expert installation are included in the cost of the project and warranty. The team of certified professionals will ensure that your product is properly installed and that the experience is hassle-free.
Additionally, their products are specifically manufactured to fit your existing bathtub and other surfaces, so it’s important that they are installed correctly. Since Bath Fitter products are known for their quality, they may void the warranty if installed incorrectly.
How do you update a bathtub without replacing it?
Updating a bathtub without replacing it is possible and can be done in a few steps. Firstly, you’ll want to give the bathtub a thorough cleaning using a mixture of baking soda, water and a mild dish-washing detergent.
This will help remove any dirt, soap scum, and grime. Next, you’ll want to remove any caulking or sealant along the edges of the tub so that it can be re-applied once the updating process has been completed.
Once this is done, you can start the process of updating the tub. You’ll have a range of options depending on the look you’re aiming for. If you’re looking to simply improve the look of the bathtub, you could use a bathtub refinishing kit to paint over any discolored areas and make them look like new again.
Alternatively, you could also use a tile paint to give the bathtub more color or a new sheen.
In addition to this, you could also add a lining or install new hardware like faucets or a shower head. Once all these steps have been completed, you’ll need to re-apply any sealant along the edges of the bathtub and let it dry.
This will help restore an airtight seal and also prevent any water from seeping through. After this, your updated bathtub should be ready for use!.
Is Re-Bath the same as Bath Fitters?
No, Re-Bath and Bath Fitters are two different companies. Re-Bath is a nationwide bathroom renovation company that offers quality products and professional installation services. Their services include bathroom remodeling, shower replacements, tub surrounds, walk-in tubs, accessibility products, and more.
Bath Fitter, on the other hand, specializes in bathroom remodeling solutions through their patented one-piece acrylic tub and shower system. They also offer bathtub liners, shower liners, wall surrounds, and accessories.
Consequently, their services are more limited compared to Re-Bath, but their product offerings are unique and offered as complete bath solutions. Regardless of whether you choose Re-Bath or Bath Fitter, both companies offer a great range of options to create a stylish bathroom that meets your needs and makes your home more comfortable.
Is it cheaper to resurface or replace a bathtub?
The answer to this question depends on the condition of the existing tub and the cost of a new tub. Generally speaking, replacing a bathtub is usually more expensive than resurfacing it, however, it depends on how much damage the tub has sustained.
In some cases, resurfacing may not be possible if the tub has too much structural damage, like chips and deep scratches. On the other hand, getting a new bathtub can be more cost effective if you need to change the shape or size of the existing tub.
In addition, resurfacing a bathtub requires that it be stripped and sanded before being resurfaced, which could add additional labor and materials costs to the project. A new tub can be swapped out for the old one quite easily.
When considering whether to resurface or replace a bathtub, it is important to consider the condition of the existing tub, the cost of labor and materials, and the specific needs of a home. If the existing tub is in relatively good condition, resurfacing may be the more cost effective option.
But if the existing tub damaged and needs to be replaced with a different size or type of tub, replacing it may be the better choice.
How much does it cost to update a bathtub?
The cost to update a bathtub will ultimately depend on the type of updates you are looking to do, what materials are being used, and the amount of labor involved. For example, replacing a simple drain cover with a more decorative cover could only be as little as $40.
However, replacing fixtures such as the faucet could start at $50-100 depending on the style and finish, with higher end models costing much more. Replacing the entire bathtub in its entirety may start at around $500 and go up to over $2,000 depending on the material and model you get installed.
If you are simply looking to do a refresh, such as painting the bathtub and replacing the caulk line, this will only cost around $100-$150 in materials, but should still be done by a professional to ensure the job is done well and safeguarded against any water damages.
Is Bathfitters guaranteed for life?
Yes, Bathfitter guarantees its products for life. This includes their tubs, showers, wall surrounds, and accessories. All of these items are completely covered against defective materials or workmanship.
They also offer optional extended warranties for a nominal fee which will cover for any kind of accidental damage. Furthermore, all Bathfitter products come with a 10-year limited warranty from their manufacturer, providing reassurance and protection.
Does Bath Fitter replace faucets?
No, Bath Fitter does not offer faucet replacement services. However, they provide full bathroom remodeling services, including bathtub and shower replacement, wall surrounds and tiles, as well as shower doors and tubs.
All products and labor for installation are provided by Bath Fitter and are tailored specifically to your home and style. They specialize in bathroom renovation services, making sure that each and every project is tailored to the customer’s needs.
If you are planning on replacing a faucet, we recommend visiting a local plumbing store or checking out the availability of the parts from the manufacturer.