The Major Deegan Highway was named after William F. Deegan, an army officer in the New York National Guard. Deegan was born in 1885 and served from 1908 to 1933, culminating his career as a Major General in 1929.
He was the first Irish-born general in the U. S. Army and the first commander of the New York National Guard. During his service, Deegan was credited with modernizing the New York National Guard and serving as the backbone of the successful mobilization of the guard to support the first world war effort.
In 1929, Deegan had retired from active military service and died in 1944. In 1948, the Major William F. Deegan Expressway was officially opened in the Bronx, NY and is now known as Interstate 87 and Interstate 287 in parts of Yonkers and White Plains.
The expressway serves as a major north-south corridor through the Bronx and is the busiest highway in the state of New York. The highway is a fitting tribute to Major General William F. Deegan and his commitment to the New York National Guard.
When was the Major Deegan Expressway built?
The Major Deegan Expressway (Interstate 87) was built in 1956 and opened to traffic in 1961. The expressway was built to provide an alternate, high-speed route for traffic going between New York City and upstate New York, as well as providing easy access to the Bronx and Westchester County, New York.
The expressway was named after William Francis Deegan, a prominent New York City highway engineer and the chief engineer of the New York State Department of Public Works, who had hoped to see an expressway linking the Bronx and Westchester.
The expressway runs through the Bronx, through the Major Deegan Interchange, and in a north-south direction through parts of Westchester and Putnam County. Today, the expressway serves approximately 150,000 vehicles per week and is a commonly used route for drivers heading upstate.
What bridge is Major Deegan?
Major Deegan is the name of a highway bridge in the Bronx borough of New York City. It carries Interstate 87, part of the New York State Thruway, over the Harlem River from the borough of Bronx County on the mainland to the borough of Manhattan in New York City.
The bridge was named for Major William Francis Deegan, who was in charge of Bronx projects for the New York State Department of Public Works from 1924 to 1930, and was designed by the firm of McKim, Mead, and White.
It was built between 1936 and 1940, and opened in August 1940. The bridge consists of seven steel-truss girder main spans, each of which is 350 feet long, with a total length of 2,809 feet. The roadway is 26 feet wide and carries four lanes of traffic.
The bridge also features pedestrian walkways on both sides, with views of the Harlem River, the Harlem River Drive and Manhattan. Major Deegan is an important part of the Bronx and New York City landscape, providing a vital connection between Bronx and Manhattan, while also offering a stunning view of the river and skyline.
What is the speed limit on the Major Deegan Expressway?
The speed limit on the Major Deegan Expressway (I-87/I-278) is 55 mph in New York City with the exception of a few specific stretches. The speed limit on the section of expressway from the Robert F. Kennedy Bridge (formerly the Triborough Bridge) to the Bruckner Expressway is 50 mph, and from there to the Bronx-Westchester county line it is 65 mph.
The rest of the expressway in the state of New York has a speed limit of 55 mph, except on the section of the expressway between Exits 15 and 16 where the speed limit is reduced to 45 mph. Additionally, the southernmost 5 miles of the expressway on the section between the Bruckner Expressway and the Willis Avenue bridge (I-278) varies between 45 and 55 mph.
Why is it called Major Deegan?
The Major Deegan Expressway, or simply the Major Deegan, is named after William F. Deegan, an Irish-American Army Major who fought in World War I and earned several awards, including the Distinguished Service Medal.
Major Deegan’s most remarkable service was in France, where he led the first American units across the Rhine River. His leadership and bravery were so significant that upon return to New York, a parade was held in his honor and he was presented with several medals afterward.
When the expressway was about to be built, the boroughs of Manhattan, The Bronx, and Westchester County got together and agreed to name it after Major Deegan, who served in the 17th Infantry Regiment.
The expressway has long been a crucial part of NYC’s transportation network and has many interchanges and bridges throughout the Bronx. It has also played a role in the revitalization of the South Bronx and is one of the main connectors from the Bronx to Manhattan and beyond, making it a fitting tribute to the heroic Major Deegan.
What is the steepest bridge in Georgia?
The steepest bridge in Georgia is located on Georgia State Route 160, in Telfair County. The bridge crosses the Little Ocmulgee River and is known as the Hall’s Creek Bridge. This bridge has a grade of 12%, which makes it the steepest bridge in the state.
The bridge has two concrete-reinforced piers with a continuous span of 60 feet, and a four-beam design with a 25-foot roadway width. The two-lane bridge can handle 8,600 lbs of traffic, and the nearby county road stretches for about 6 miles.
What is the Alexander Hamilton Bridge?
The Alexander Hamilton Bridge is an eight-lane motor vehicle bridge that connects the Bronx in New York City to Upper Manhattan. The bridge spans the Harlem River and is one of three vehicular crossings in the area.
The bridge was originally designed by David Steinman and was completed in 1963. The bridge is named after the Founding Father and first Secretary of the Treasury, Alexander Hamilton, in recognition of his lifelong efforts to create the financial structure of the United States.
The bridge consists of dual cantilevered steel truss spans that are each 500 feet long and weigh about 950 tons in total. The horizontal alignment of the steel superstructure of the bridge is skewed 30 degrees to the left of the vertical alignment.
The Alexander Hamilton Bridge boasts a more than 45-foot wide roadway that includes four 12-foot wide lanes in either direction and guardrails flanking the roadway. The bridge also features a 10-foot wide sidewalk and 10-foot wide bike lanes that are found on either side of the roadway and have steel handrails.
The bridge also includes an 8-foot wide maintenance path that is not situated inside the superstructure of the bridge, but rather at the side of it.
What bridge is above the Hudson River?
The George Washington Bridge is the bridge that spans above the Hudson River. This iconic bridge connects Fort Lee, New Jersey to Washington Heights in northern Manhattan, New York. Built in October of 1931, the George Washington Bridge is the world’s busiest motor vehicle bridge with more than 103 million vehicles crossing it each year.
The bridge is made up of 14 lanes and two main spans each reaching 3,500 feet in length and reaching a maximum height of 604 feet above the Hudson River. It has distinctive chocolate-brown towers, once described as “the most beautiful bridge in the world,” and is a National Historic Civil Engineering Landmark.
Where is the highest bridge in NC?
The highest bridge in North Carolina is located on the Blue Ridge Parkway in Jackson County near the intersection of the parkway and NC 151. The Linn Cove Viaduct is a 1320-foot long bridge that climbs up, curves around, and winds down a mountain at a peak elevation of over one thousand feet! The bridge rises to 1237 feet above sea level, making it the highest bridge in the state.
The Linn Cove Viaduct is a stunningly beautiful engineering masterpiece that is a must-see destination for anyone taking a trip through North Carolina.
What’s the fastest speed limit in New Mexico?
The fastest speed limit in New Mexico is set at 75 mph for limited-access highways and state routes, 70 mph for interstate highways, and 65 mph on all other highways. The state has implemented certain restrictions on these speed limits, including requiring all drivers to adjust their speed for certain weather and road conditions, as well as observing the maximum speed limit posted in all construction zones, school zones, and residential areas.
Also, certain areas, such as cities and national parks, may impose a lower speed limit than the statewide limits, so it’s important to check the posted limit in those areas. In any case, it’s wise to use caution and mindful driving while traveling on New Mexico’s roads and highways.
How do I see speed limits on Google Maps?
You can view speed limits on Google Maps by turning on the speed limit feature. This feature is available on both the desktop and mobile versions of Google Maps. To turn on speed limits in the desktop version of Google Maps, open the side menu, select Settings, and toggle on “Speed limits”.
This will display a sign for speed limits in miles per hour (mph) on the map. In the mobile version of Google Maps, open the side menu, select Settings, and toggle on “Show speed limits”. This will show a speed limit sign on the lower left side of the map.
This feature is available for driving, biking, and walking directions. As always, it’s important to follow local laws and practice safe driving.
What is Route 87 called in New York?
Route 87 is commonly referred to as the Adirondack Northway in New York. It is a north-south highway running 132 miles along the eastern portion of the state, beginning in Albany and ending at the Canadian border in the Adirondack Mountains.
Along the way, it passes through some of the most beautiful and iconic parts of New York, including the Saratoga area, Lake George, and the High Peaks of the Adirondacks. Much of the highway is four lanes, however, there is a stretch of two lanes near the northern end that is often congested due to the number of visitors and tourists traveling the route each year.
Despite the traffic, Route 87 is a great way to experience some of the best of what New York has to offer and makes a great road trip destination.
Why is I-87 called the Northway?
I-87, or the Adirondack Northway, is named as such because it was constructed to reach the northernmost parts of New York State. The Northway extends from the Burlington, Vermont, area all the way to the Canadian border, passing through the Adirondack Mountains.
The Northway is the northernmost east-west highway in the state and continues beyond the border of New York by connecting to the Autoroute 15 in Canada. The Northway was also constructed to connect Québec to the mid-Hudson Valley Region of New York.
Construction on the Northway began in 1958 and ended in 1967. It was completed almost in time for the 250th anniversary of the French and Indian War. Initially, it was known as the Adirondack Expressway, but in 1970 the name was officially changed to the Adirondack Northway.
The route has remained largely unchanged since the 1960s, servicing the many sightseeing and hiking spots along the way. It has also greatly improved travel times throughout the area, connecting major travel hubs to each other and expediting travel along the eastern coast of the United States.
Since its construction, the Northway has become an integral part of life in the Northeastern United States, with millions of motorists using its route each year. For this reason, I-87 (as the Northway was officially designated in 1985) is known as the Adirondack Northway.
What is the longest highway in New York State?
The longest highway in New York State is Interstate 90 which is 487 miles long. This highway runs across the northern portion of the state, beginning at the Pennsylvania state line near the town of Ripley, and extending east across the state ending at the Massachusetts border near West Stockbridge.
Along the way, Interstate 90 passes through such well-known cities as Buffalo, Rochester, Syracuse, and Albany. It also passes through some of the most picturesque landscapes in the state, including the Adirondack Mountains, the Finger Lakes region, and the central part of the state along the Mohawk River Valley.