Yes, you can get a one piece tub surround. A one-piece tub surround is an easy to install and care for surface that encapsulates the entire bathtub and walls and provides a waterproof barrier. It consists of a large panel made of acrylic, fiberglass or PVC that wraps around the entire perimeter of the bathtub and walls up to the ceiling, eliminating the need for grouting or caulk joint.
Installed in one piece, it is more durable and easier to clean than traditional tile and grout. One piece tub surrounds typically come in a variety of colors and finishes, so they can be easily matched with other fixtures in the bathroom.
Plus, they can be purchased online or in many home improvement stores, making installation a snap.
What is the easiest tub surround to install?
The easiest tub surround to install is one that is made from pre-formed acrylic sheets. Acrylic shower and tub surrounds are typically available in 5 to 6 foot wide panels that can be cut to fit any space.
The panels are placed over the studs, and then secured to the wall with glues and plastics anchors, making for an easy and fast installation. Installation is much simpler than with tile because there’s no grout to apply, and no cement board to cut or fasten in place.
Acrylic tub surrounds are also ideal for a DIY job because they are lightweight, easy to maneuver around the room, and require minimal tools.
What is a one piece shower tub called?
A one piece shower tub is a type of shower/bathtub combination unit which is sometimes referred to as a “shower bath. ” This design is created when a full-sized bathtub and shower are built together as one seamless unit.
This can be a great choice for those looking for an all-in-one solution for their bathroom, as no typically tiling or grouting is required due to the one-piece construction. One piece shower tubs can be configured in many different ways, from corner units to alcove units, and even configurations which involve an angled back wall.
The options are nearly endless, so you’ll be sure to find the perfect one piece showertub to suit your needs.
Can you put a tub surround over existing tub?
Yes, you can put a tub surround over an existing tub. The first step is to prepare the surface for the surround. Remove any old caulking or sealant, soap scum, and any other residue that may be present on the tub surface.
Once the surface is clean, you’ll want to measure the walls and select a tub surround that fits within your space. When you purchase the surround, ensure that you also get any necessary adhesive or caulk to complete the project.
You’ll then need to cut pieces of the surround to fit around fixtures already in the area, such as the tub faucet. Once the pieces are cut and fit, you can use special adhesive or caulk to secure the surround to the wall and tub edge.
Let the adhesive or caulk dry completely before using the tub. Finally, be sure to use mildew-resistant sealant to create a water-resistant barrier between the tub and the surround.
How much does it cost to remove and replace a bathtub and surround?
The cost of removing and replacing a bathtub and surround is highly dependent on the type of bathtub, surround, and materials that are being used. Generally, installation can cost anywhere from $1,200 to $5,000.
This price depends on the complexity of the project, accessibility to the area, complexity of the fixtures, type of tub and surround, regional labor costs, and any setup or customization that may need to be included.
For example, if the size and shape of the bathroom or area is small or difficult to work with, it may require additional labor and cost more. Alternatively, if the size and shape of the bathroom or area is large and easily accessible, it would typically cost less.
The cost of the actual materials can also vary significantly, from basic cast iron tubs and fiberglass surrounds to more intricate and expensive freestanding tubs, copper tubs, custom tile surrounds, etc.
Additionally, certain customizations such as air/whirlpool jets, a heated backrest, or a shower surround may add to the cost. Finally, the cost of professional installation needs to be taken into consideration, which can range from $100 to $400 per hour.
Overall, to get the best estimate on the cost of removing and replacing a bathtub and surround, it is best to consult with a licensed professional for an accurate estimate of the project.
How do you modernize an old bathtub?
Modernizing an old bathtub is a great way to give it a more contemporary look and feel, and it doesn’t have to be a huge project. Some quick and easy updates can make a significant difference in the look and feel of the tub.
The first step is to give the tub a good cleaning. Use a non-abrasive cleaner to get rid of any soap scum or other residue that may have built up over time. If there are any cracks or chips in the porcelain, you can use repair kits to fill them in and make the tub look a lot better.
The next step is to repaint or refinish the tub. If your tub is porcelain, you can use a variety of epoxy-based paints and finishes. If your tub is made of fiberglass, you can use a polyester-based gel coating to give it a glossy finish.
Another option is to replace the hardware on the tub. New taps and shower heads can make a big difference, and you can even add a handheld showerhead for more control and convenience. If your tub doesn’t have a shower fence, consider adding one.
This will both add a modern look and boost safety when getting out of the tub.
Finally, consider adding accessories like a shower caddy, a storage shelf, or even a set of wheels to make it easier to move. With all of these updates, you can modernize an old bathtub and make it look brand new.
How can I redo my bathtub without replacing it?
Refinishing or resurfacing your bathtub is a great way to give it a brand new look without the hassle or cost of replacing it. Refinishing is often a simpler and more cost-effective option – you can do it yourself or hire a professional.
Start by cleaning the tub and scrubbing it with a brush to get rid of any buildup. This will help the refinishing product stick better. Once the bathtub is completely dry, use a handheld sander to sand down the surface, then remove any debris with a wet cloth.
Next, apply a bonding primer to the entire surface of the tub, followed by a few coats of epoxy paint or acrylic enamel paint, depending on which product you’ve chosen. Allow the paint to dry thoroughly between coats, and use masking tape to protect the surrounding area from splashes and drips.
When the tub has been completely painted, allow it to cure for 24 to 48 hours before cleaning it with warm water and mild soap; afterward, you can apply a sealant or a clear acrylic glaze to protect and preserve the finish.
Refinishing your bathtub can be a cost-effective way to update it and make it look like new. Just make sure to follow the package instructions carefully and take your time when you’re working to avoid any mistakes.
What do you put behind a tub surround?
Behind a tub surround, there are several things that are typically put in place. Depending on the installation, there may be some kind of backer board installed behind the wallboard or tile. This will help to provide additional support to the material being used on the walls, as well as a place to attach fixtures, such as towel bars or toilet paper holders.
Behind the backer board, it’s important to also include a layer of waterproofing material, such as sheet plastic or a moisture barrier. This material helps to protect the wall from any moisture or water leakage, and prevents mold and mildew from forming.
Lastly, it’s important to include an insulation layer to the back of the tub surround. This will help to keep the surrounding area around the tub warm and comfortable.
What is an apron style tub?
An apron style tub is a type of bathtub that has a visible section of the bathtub walls exposed at the front, giving the appearance of the tub being wearing an apron. This style may also be referred to as an alcove-style tub as it fits in a three-walled alcove space.
In addition to providing a stylish look, apron tubs are also engineered to fit more easily into smaller bathroom spaces. These tubs are typically freestanding and can be made of various materials such as cast iron, acrylic, enameled steel, and cultured marble.
Apron tubs often come with features such as jets, LED lighting, and air bath whirlpool systems for an additional cost. Many tubs also come with side-mount drains, making them easier to access and clean.
With its varied designs, styles, and features, an apron style tub can be the perfect addition to any bathroom.
What are the three types of showers?
There are three main types of showers: electric showers, mixer showers, and power showers.
Electric showers heat the water as it passes through an element in the shower, which means that water pressure is not an important factor with this type of shower. They require no additional installation apart from a dedicated electric shower circuit, making them a cost-effective and efficient option.
Mixer showers work by combining hot and cold pipes, which are then regulated via a mixer valve. This type of shower is usually more aesthetically pleasing than electric showers, as it allows for more design flexibility when it comes to the shower unit itself.
Power showers are very similar to mixer showers in the sense that they combine hot and cold water before sending it through the showerhead. However, power showers use an integrated pump to guarantee a steady, powerful flow of water.
It is important to note that these showers require a higher water pressure and can be quite expensive to install.
Can you have a soaking tub shower combo?
Yes, it is possible to have a soaking tub shower combo. This type of setup pairs a large bathtub with a shower, combining the two in a single space to create a luxurious and functional bathroom. The soaking tub can be a freestanding or drop-in tub with a wall-mounted or built-in shower head.
The shower area should be tiled with water-resistant material and may come with a separate enclosure for privacy or open to the main bathroom for a more spa-like atmosphere. If you choose to have a shower, ensure that you have a waterproofing system installed to protect the tub from water damage.
Additionally, installing grab bars and slip-resistant surfaces near the tub can ensure the safety of everyone using the space.
Is a tub shower combo considered a full bath?
Yes, a tub shower combo is considered a full bath. A full bath typically includes a sink, a toilet and either a bathtub or a shower. A tub shower combo combines the two elements, providing a full bath with a single unit that uses the same plumbing connections.
In addition to providing a space-efficient option, a tub shower combo can also offer greater design flexibility that you may not be able to get with separate units. For example, you can opt for a combination of different materials—such as a tile shower surround with a tub made of wood or enameled steel.
A full bath with a tub shower combo will offer a convenient and comfortable experience for anyone who uses it.
What do you call a bathroom with two entries?
A bathroom with two entries is typically referred to as a “Jack and Jill” bathroom. The name is derived from the traditional English nursery rhyme, and it is mostly used to refer to bathrooms that have two separate entrances and typically connect two rooms, but can also connect two hallways.
The main purpose of a Jack and Jill bathroom is to allow both rooms to have convenient access to the same bathroom, while still providing some amount of privacy. Jack and Jill bathrooms are most frequently found in homes with dual master suites, but can also be utilized in larger homes with multiple bedrooms or in commercial buildings such as offices or hotels.
What is a combo shower?
A combo shower is a combination of a shower and a bathtub. It is created by installing a shower head at one end of the bathtub and a shower curtain at the other end. The idea behind a combo shower is that you can have both a shower and a bath together.
With a combo shower, you can achieve the same level of comfort and convenience as having separate shower and bath fixtures. You can use the shower head to easily rinse off while the warm water of the bathtub offers a soothing experience to relax in.
Additionally, combo showers are great for smaller bathrooms that may not have enough space for a standalone shower and bathtub. They can also be more versatile for people who want to linger in the shower for longer periods of time without worrying about water spilling out of the shower.
Does a tub surround go over drywall?
Yes, a tub surround can go over drywall, however, it is important that you follow the manufacturer’s instructions for installation and use the necessary materials to ensure a safe and secure installation.
If your drywall is not in good condition or has been subject to moisture, you may need to replace it before you install the tub surround. For example, if the drywall has been water damaged, it could become soft or start to break apart when the surround is installed and secured.
You should also check that the drywall is structurally sound and free of mold prior to installation. Additionally, you may also need to install a vapor barrier and/or other waterproofing measures to avoid potential water damage to the area.