Removing a broken tub drain can be a tricky job, especially if the drain is well-seated in the drain pipe. To get started, you will need a bucket and drain snake, drain auger, screwdrivers, hack saw or pipes cutters, WD-40 or a penetrating oil, pliers, an adjustable wrench, plunger and a new drain assembly.
For starters, you’ll need to purchase a new drain assembly that is compatible with your existing plumbing. Once you’ve got the new drain, you’ll need to shut off the water supply and loosen the old drain using a screwdriver or pliers.
Be sure to unscrew it slowly and carefully, as it is likely to be corroded and fragile. Once the drain is removed, you may need to use a drain auger or snake to break off any material that is stuck in the drain.
Once the drain is completely removed, you may need to use a hack saw or pipes cutters to cut away any excess material. You may also need to apply some WD-40 or a penetrating oil to the threads of the drain pipe if they are stuck together.
Once everything is cut away and the threads of the drain pipe have been lubricated, you can re-position the new drain and put the pieces of the assembly back together.
You’ll need to use an adjustable wrench to secure the drain piece, plunger to get rid of any remaining air, and pliers to hold the pieces of the assembly in place while you’re tightening it. After everything is tightened and the piece is securely attached, you can now open the water supply valve and check for any leaks.
If there are no leaks, your new drain assembly should now be in place. Be sure to test it out by running water to make sure it works properly. If it does, you’re done! If any of these steps seem overwhelming, it is probably best to hire a professional plumber to complete the job.
Is there a tool to take out a tub drain?
Yes, the correct tool to use to take out a tub drain is a drain removal tool. This type of tool is designed to easily and effectively remove your tub drain without damaging it. It usually features a handle, a flat edge for leverage, and a tapered end for fitting inside your drain pipe.
The handle allows you to apply enough force to rotate and remove the drain. If you are unsure which drain removal tool is suitable for your tub, you can consult a professional plumber.
What is the easiest way to remove a bathtub drain?
Removing a bath tub drain is a straightforward process that doesn’t require any complex tools.
First, you should make sure the water supply is shut off and the tub is drained. Next, take a flat head screwdriver and remove the top drain cover. After taking the cover off, use an adjustable wrench to loosen the screws that hold the drain assembly in place, then remove the drain and set it aside.
Once the old drain is removed, it’s time to install the new one. Begin by inserting the new drain into the drain opening and use the supplied screws to secure the new drain assembly into place. Make sure the drain is properly lined up with the wall.
Use the adjustable wrench to tighten the screws securely.
Once the drain is in place, use plumbers putty to form a seal between the drain and the tub basin. Let the putty dry and then you’re ready to re-attach the upper drain cover. This should complete the process of removing and replacing the bath tub drain.
How do you use a tub drain extractor tool?
Using a tub drain extractor tool is quick and easy. First, you remove the tub drain cover to access the drain. You then attach the extractor tool to the drain and use a rubber mallet to tap it into place if necessary.
Next, you turn the extractor tool handle in a clockwise motion to secure it to the drain. You then unscrew the drain plug counterclockwise until it’s loose. Finally, you pull the drain plug out of the drain and the extractor tool should have the right size to pull any hair or gunk out of the drain.
After removing the clog, you simply place the drain cover back in place and you’re done.
How do you get out of a bathtub with one leg?
Getting out of a bathtub with one leg can be difficult and requires some planning in advance. Before getting in, it may be best to place a towel, mat, or something else at the spot where you will be stepping out of the bathtub to lessen the chances of slipping.
Once you’re ready to get out, it’s important to remain as steady as possible while shifting your weight to the leg you have. Grip the side of the bathtub with your hands, pressing into the wall for balance.
Reach your leg you have out first and secure yourself by placing the foot firmly on the end of the bathtub. Once comfortable, extend your arms, reach for the wall, and slide your other leg out of the bathtub.
To further mitigate the risk of slipping or sliding, tie a slip-proof bath grip onto any area of the bathtub where your hands or arms may be gripping.
When getting out of the bathtub, be mindful of your body’s capabilities and go slowly. Try to be as steady as possible, and remember that you can always ask for assistance from a loved one if needed.
How do you take apart an old shower drain?
Taking apart an old shower drain can be a tricky process if you’re not familiar with plumbing. You’ll need a few tools to get the job done, such as a pair of pliers, a basin wrench or channel locks, and a screwdriver.
First, locate the grate cover of the shower drain. Depending on your type of shower drain, you may need need a screwdriver to remove the screws securing it in place. After the grate has been removed, you should be able to access the drain pipe or flange that connects the shower drain to the shower.
Using pliers or the basin wrench, loosen and unscrew the drain pipe or flange. If you find it difficult to grasp the pipe, you may need to fill the shower with water to provide more weight to help you unscrew the drain pipe.
Once the drain pipe is removed, you will likely be able to remove the additional screws that held the flange in place. Use a screwdriver to remove the screws and carefully detach the flange from the shower.
Finally, you should be able to pull the old shower drain away from the shower. At this point, you may wish to replace the old shower drain with a new model.
Can you replace a tub drain assembly?
Yes, you can replace a tub drain assembly. The process may be slightly different depending on the type of tub drain you have, but generally, it is a straightforward process. Most tub drain assemblies come with instructions that should be followed during installation.
In some cases, you may need to use tools, such as a screwdriver, adjustable wrench, or pipe wrench, to remove the old assembly and install the new one. It is a good idea to check for any obstructions, such as hair, before removing the old drain assembly.
During the installation process, you will need to attach the drain assembly to the tub and make sure the stopper is in the correct position. Additionally, you will likely need to caulk the area around the tub drain for a secure fit and to help keep water from seeping around the drain.
Once the caulk is dry, your tub drain assembly should be correctly installed and working properly.
How does a tub drain wrench work?
A tub drain wrench is a plumbing tool used to remove and install tub drains. It features two half-circle blades that fit over the drain and a thumbwheel that allows the user to tighten and loosen the drain nut.
To use the wrench, you place it over the drain, insert the blades into the back of the drain, and twist the thumbwheel to tighten or loosen the nut. This allows the user to remove or replace the drain, depending on the task.
Furthermore, the wrench has a unique design that helps you apply even pressure to the nut, ensuring that it is tightened or loosened securely, as well as a secure handle to make sure the tool is held firmly as you work.
Why can’t i snake my bathtub drain?
Snaking a bathtub drain is generally not a recommended form of drain maintenance. Snaking can damage the integrity of the pipes and the plumbing system in general. Even if a toilet, sink, or bathtub appears to be clogged and requires snaking, it is best to contact a plumber who has the right tools and experience to effectively address the problem.
Snaking a bathtub drain can damage the seals around the drain, and can also damage the integrity of the piping system surrounding it. Additionally, snaking can lodge debris farther or deeper into the drain pipes, causing more damage or blockages than were originally present.
With those potential risks, it is recommended to contact a professional plumber first if any signs of clogging appear. A professional plumber can utilize tools such as hydro jetting, or use specialized tools and techniques to perform the task in a safe and effective way.
What can I use instead of a drain wrench?
If you don’t have a drain wrench available, you can use an ordinary adjustable wrench to loosen the bolts and turn the drain. Adjustable wrenches feature a flat, jaw-like opening that can conform to various shapes and sizes.
You can usually find an adjustable wrench in any toolbox or hardware store. Another option to loosen the drain is to use a pair of plumbing tongues, which are wide-bladed tools that are curved to fit the shape of the drain.
They are easy to hold and turn and can even be used with a pair of pliers if necessary. Finally, you could use a screwdriver to press down on the nut or bolt and turn it to loosen it. Whatever you use, always mind the direction of the force you are applying and make sure not to over-tighten the bolts when you are done.