Removing a hidden fixing toilet seat requires a few steps. First, you’ll need to remove the two bolts that attach the seat and lid to the toilet bowl. These bolts are usually located under the edge of the seat and lid.
They can often be difficult to reach, so use a standard screwdriver or a specialized nut driver to loosen the bolts. Once the bolts are removed, the seat and lid will be able to lift up and off the toilet bowl.
Then, you’ll need to access the hidden fixing mechanism, which is usually nestled underneath the toilet bowl. It depends on the type of hidden fixings, as there may be nuts, bolts, and/or plastic plugs or caps.
You’ll have to either unscrew the nuts or use a flathead screwdriver to push and turn the plastic caps in order to remove them. Finally, the seat and lid can be removed from the fixing mechanism, leaving you with a bare toilet bowl.
Now you can replace the seat and lid with a new one, then repeat the above steps in reverse order to get it securely mounted and ready for use.
How do you change a toilet seat on an enclosed toilet?
Changing the toilet seat on an enclosed toilet can be a straightforward process with the right tools and techniques.
First, it’s important to carefully turn off the water supply to the toilet bowl. This will prevent any water from spilling out when the seat is removed.
Next, loosen the nuts holding the toilet seat to the toilet bowl from underneath the bowl. This can be done using pliers or a wrench. Once the nuts have been loosened, lift the seat off of the toilet bowl.
Now install the new stool seat. Make sure that any seat bolts or other components are correctly placed on the seat and then lower the seat back onto the toilet bowl. Secure the seat to the bowl using plastic or zinc bolts and the appropriate washers.
Finally, turn the water back on and test to make sure the seat is securely attached to the bowl. If everything is working properly, the job is complete and your toilet seat has been successfully changed.
How do I remove Bemis toilet seat with hidden FIXS?
To remove a Bemis toilet seat with hidden FIXS bolts, you will need a few tools. Begin by unplugging any power cord that is connected to the seat and turning off the water supply to the toilet. Next, you will need a towel or rag to protect the floor area around the toilet.
To locate the hidden FIXS bolts, locate the grooves that are located on the top of the toilet seat.
Once you have located the grooves, use a small flat head screwdriver to remove the bolts within the grooves. You may need to twist the screws in order to loosen them from the seat.
Once the screws have been removed, lift the toilet seat up and off the toilet bowl. If the seat is hard to remove or is stuck to the bowl, you can use a plunger to help break the seal which will help to remove the seat.
When the seat is removed, you may need to replace any worn or damaged bolts before replacing the seat.
Once the seat is off, you can use an all-purpose cleaner to wipe down the area and the seat. Then, you can install the new seat by reversing the steps you used to remove the original seat. Remember to reattach the power cord, if applicable, and turn on the water supply to the toilet.
What are the different types of toilet seat fittings?
The most common type is the anchoring type, which is typically used in households. This fitting uses two metal bolts which are anchored directly into the toilet bowl, usually through the holes in the rim.
The seat is then placed over the bolts and tightened into place.
Another common type of toilet seat fitting is the snap-on type. This is generally easier to install, as it requires no anchors or bolts. Instead, the seat is secured to the bowl by a plastic bracket connected to four spring clips.
The clips securely hold the seat onto the bowl, making this type of fitting a great choice for those who rent or are looking for an easy and quick installation.
The last type of toilet seat fitting is the mounting type. This is the most secure fitting type for toilet seats, as it uses a series of screws which must be fastened into the floor of your bathroom in order to secure the seat.
While this is the most secure type, it also requires more work and can be difficult to install depending on the flooring in your bathroom.
What is a bottom fixing toilet seat?
A bottom fixing toilet seat is a type of toilet seat with a special installation design that attaches to the toilet pan from the underside. This type of toilet seat is beneficial as it is usually more secure, as the fixing is underneath the pan and out of sight, so tampering is harder.
In comparison to the standard toilet seat, which is secured by screws on the top of the pan, a bottom fixing seat is much easier to install and change if the need arises. They are also generally more rigid and durable, as the seat is generally screwed into the pan, rather than resting on the rim.
Additionally, they tend to provide a little more privacy due to the extra height they bring to the seat.
Where are the screws on my toilet seat?
The screws on a toilet seat are generally located near the rear of the seat, near the hinges. On most modern toilets, there should be two screws which secure the toilet seat to the toilet itself. These screws are usually mounted along the top inner edge of the bowl.
Depending on the brand of toilet, the screws can be either covered or exposed. If covered, they will typically be beneath a plastic cap. Exposing the screws usually requires removing the plastic cap.
Once exposed, you should be able to see the screws easily.
How do you tighten a toilet seat with no access underside?
If you’re trying to tighten a toilet seat without access to the underside of the seat, you may want to try using a pair of adjustable pliers or plumber’s wrench. First, adjust the pliers or wrench so that it fits snugly around the top of the bolt that holds the seat to the toilet bowl.
Then, turn the pliers or wrench in a clockwise motion to tighten the bolt. Make sure to keep pressure even and steady so that you don’t over-tighten the bolt and cause it to strip. Depending on the type of bolt and seat, you may need a different type of pliers or wrench so make sure to have the right tool for the job.
If you’re still having difficulty tightening the seat, you may need to try a rubber band or clothes hanger as a temporary fix. To do this, tie the rubber band or clothes hanger around the seat and adjust it until it has a tight fit against the toilet bowl.
Do all toilet seats fit all toilets?
No, not all toilet seats fit all toilets. Toilet seats come in a variety of shapes and sizes, and the size and shape of the toilet bowl determines which types of toilet seat will fit it. Toilet seats generally come in three standard sizes: round, elongated, and universal.
Round toilet seats usually fit round toilet bowls, elongated toilet seats usually fit elongated toilet bowls, and universal toilet seats can fit both round and elongated bowls. Additionally, some toilet bowls may not be compatible with certain toilet seat designs and features, such as slow-close or quick-release technology.
Therefore, it is important to measure the shape and size of the toilet bowl before purchasing a toilet seat to ensure that it will fit properly.
Are all toilet seat hinges the same?
No, all toilet seat hinges are not the same; there are multiple different types available in the market. Toilet seats are generally available with either plastic hinges or metal hinges. Plastic hinges are generally the most cost-effective, as they are much cheaper to replace than metal hinges.
However, plastic hinges can be flimsy compared to metal hinges and are much more likely to break after frequent use. Metal hinges are more durable, but tend to be more expensive and are generally more difficult to install.
There are also different hinge styles available, such as those with adjustable variables for different size toilets, or those designed for permanent installation. Some manufacturers also offer special toilet seats which have integrated hinges for a more decorative look and often more stability.
Ultimately, the type of hinge you choose depends on personal preference, as well as the toilet size and shape.
What does it mean when a toilet is skirted?
When a toilet is skirted, it means that the base of the toilet is covered with a decorative panel or skirt. The skirt helps improve the aesthetics of the toilet and hides the plumbing under the toilet.
Skirted toilets can add a modern or traditional look, depending on the design and style of the skirt. Additionally, some skirted toilets may come with special features, such as hidden tanks, easy-access, and slow-close lids.
There is a wide range of materials, sizes, and designs for skirted toilets, making it easy to bring a personalized touch to any bathroom.
Why you shouldn’t flush the toilet with the lid up?
It is not recommended to flush the toilet with the lid up for a few reasons. Firstly, it increases the risk of bacteria and viruses leaving the toilet bowl, potentially travelling through the air and infecting other people.
To reduce the risk of airborne diseases, it is best to close the lid before flushing the toilet.
Secondly, flushing the toilet with the lid open causes a huge mess. Water, urine and other particles are splashed out of the bowl and onto the floor and walls. This can cause a smell and spread disease-causing bacteria.
Lastly, when the lid is not closed during the flush it causes an increase in water consumption. This can be costly and harmful to the environment and can even cause a strain on the water system.
Overall, it is best to keep the lid down before flushing the toilet in order to protect yourself and others from airborne viruses, bacteria, and other germs, and also to prevent splashes. Additionally, closing the lid helps conserve water which is an essential resource!.
Is it better to flush the toilet with the lid up or down?
When you flush the toilet, it is generally better to keep the lid down. This is for multiple reasons. First, it helps to contain unpleasant smells within the porcelain bowl. This not only keeps you from having to smell the contents of the bowl, but also ensures that air in other areas of the bathroom isn’t contaminated by the smell.
Also, keeping the lid down helps contain germs and bacteria from the bowl. Whenever you flush, aerosolized particles from the bowl are released into the air, which means that having the lid open can spread those tiny droplets throughout the bathroom and nearby areas.
Keeping the lid down traps these particles in the bowl, so that you aren’t breathing in germs or bacteria that could make you sick.
Finally, having the lid down helps to cut down on noise. While the noise of flushing itself isn’t particularly loud, having the lid open amplifies it, making it more irritating. Keeping the lid down helps to diffuse the noise and keeps sounds contained in the bathroom.
Overall, it is generally best to flush the toilet with the lid down for optimal hygiene, smell containment, and noise reduction.
What are the only 3 things you should flush down the toilet?
The only three things you should flush down the toilet are human waste, toilet paper and water. Human waste is composed of feces and urine and should always be flushed right away. Toilet paper is designed to break down when it is exposed to water and should only be used in small, flushable amounts.
Lastly, water should be used to flush these two items away and can help move solid waste more quickly and easily. It is important to note that other items should never be flushed, such as wet wipes, paper towels, feminine hygiene products, cotton swabs, or cigarettes.
These items can cause clogs, which can lead to costly plumbing repairs. Additionally, certain items should never be placed in toilets such as food, diapers, kitty litter, condoms, or medication.
Which flush is for poop?
The flush that is used for poop is typically a “full flush” toilet, as opposed to a low-flush or dual-flush toilet. A full flush toilet utilizes an average 3 to 5 gallons of water to completely evacuate the bowl, which is the most effective option for dealing with solid waste.
A low-flush or dual-flush toilet uses significantly less water but may be less effective for completely removing solid waste. Many toilets today are dual-flush, allowing you to use less water for liquid waste, but it is important to choose the full flush option when dealing with solid waste.
If you’re not sure if your toilet is a full flush, you can usually check the manufacturer’s instructions to determine the type of flush your toilet utilizes.
Is it OK not to flush pee?
No, it is not OK not to flush pee down the toilet. Bathroom etiquette and general cleanliness dictate that after you use the restroom you flush away the urine and any other waste. By not flushing, you leave unpleasant odors and the area can become unsanitary.
Even if you are at a public restroom, you should flush the toilet when you are done. Not only is it polite, but it is important for proper sanitation.