The cost of having a new toilet installed can vary depending on several factors. Generally speaking, the cost of the toilet itself will be the single largest component of the cost, and will vary depending on your budget, the type of toilet, and the brand.
After that, the installation cost will depend on the complexity of the installation and the labor rate of the plumber. Some installations may be as simple as swapping out an existing toilet, while others may require new plumbing fixtures, beams and supports, or a larger waste line to accommodate the new fixture.
Based on this, the cost for having a new toilet installed can range from a few hundred dollars for the most basic installation, up to a few thousand depending on the complexity. It’s best to get several estimates from licensed plumbers to compare the true cost of a new toilet installation.
How much does Home Depot charge for installing a toilet?
The cost of having a toilet installed by Home Depot will vary depending on the type and style of toilet you choose. If you are looking for basic installation of a standard toilet, the national cost ranges from $180 to $364, with an estimated average of $264.
However, prices can increases significantly if additional features and/or repair work is required. Home Depot’s installation services include installing the toilet, replacing wax rings, fixing broken shut-off valves, adjusting the height of the toilet for greater comfort, and providing a final clean up.
Home Depot also charges a haul-away fee when you request them to remove the old toilet. Prices will also vary depending on where you live and the size of the job. You may be able to save some money by doing the installation yourself, however, it is always best to use a certified plumber for the job.
How much does it cost to install a new toilet and remove the old one?
The cost of installing a new toilet and removing the old one will vary depending on various factors, such as the type and size of toilet you choose, the plumbing needed to connect it to your existing plumbing, any special fixtures or materials required for installation, and the labor costs involved.
On average, expect to pay anywhere from $200 to $800 for the total cost of installation and removal of an old toilet. This range can go up or down depending on the number of bathrooms you have, the type and quality of fixtures you choose, and the local labor costs in your area.
Additionally, if your existing plumbing requires repair or replacement in order to allow proper connection of the new toilet, the cost of installation may be higher. In some cases, you may also need to purchase a wax ring, mounting hardware, and perhaps a new supply line to connect the toilet.
All of these factors can contribute to the total cost of installing a new toilet and removing the old one.
Is it worth it to replace old toilet?
Replacing an old toilet is often worth it. Older toilets are often inefficient and bolt onto the floor, making them difficult to remove and replace. Additionally, they tend to be less comfortable and provide less flushing power.
Newer, low-flow toilets are designed to save water and are more comfortable to sit on. Furthermore, they are easier to install and don’t always require bolts, making the replacement process much simpler.
Replacing an old toilet could save water and money on your water bill, as well as creating a much more pleasant bathroom experience.
How long does it take a plumber to install a new toilet?
It depends on a number of factors. A plumber can typically install a new toilet in about 1-2 hours. However, installation may take longer if the new toilet needs to be hooked up to new pipes or if additional work needs to be done to the surrounding wall or flooring.
If the installation is being done as part of a larger project, such as a bathroom renovation, the plumber may need to work around other tasks being done, which could add to the installation time. In some cases, a plumber may need to order specific parts that may delay the installation.
Additionally, if the fixtures in the bathroom are outdated, a plumber may spend extra time making sure that the new toilet fits with the existing fixtures. Ultimately, the amount of time a plumber takes to install a new toilet depends on the specific situation but in most cases it can be done in under 2 hours.
How many years does a toilet last?
Typically, a toilet will last anywhere from 10 to 15 years. The average lifespan of a toilet, however, can be affected by several different factors. Generally speaking, toilets that are installed and maintained correctly will last longer than toilets that are not.
Additionally, the type of material that the toilet is made from, such as ceramic or porcelain, will influence the lifespan of the toilet. High-quality ceramic and porcelain toilets, for example, may last up to 30 years or more.
As with any plumbing fixture, it is important to perform regular maintenance, such as making sure pipes are properly insulated and checking for any signs of damage or wear. Finally, the frequency at which the toilet is used will play a role in how long it may last.
Should I replace 30 year old toilet?
It depends. Generally speaking, if your 30 year old toilet is still functioning properly, there is no need to replace it. However, toilets do start to wear down the older they get, and you may find that, after 30 years, your toilet is no longer functioning as efficiently as it once was, is consuming far too much water for flushes, or is simply too old to operate safely.
In this case, it would be recommended to replace the toilet with a newer, more efficient model. Additionally, if your current toilet is an inefficient single-flush, replacing it with a dual-flush option could save you hundreds of gallons of water per year.
How do you know when a toilet goes bad?
When a toilet “goes bad,” this usually means either the internal parts are malfunctioning or there is an issue with the external parts. Signs that the internal parts are malfunctioning include weak flushing, constantly running water, or odd noises coming from inside the tank.
Signs of external problems include water around the base of the toilet, a loose handle, or a cracked or otherwise damaged toilet bowl. If you are experiencing any of these issues with your toilet, it is important to consult a professional plumber to take a look and assess the situation.
If the toilet is relatively new, it might still be under warranty and require the manufacturer to repair it or replace it. Ultimately, if any of these issues occur, it is best to have a professional assess it to determine why the toilet has gone bad and what can be done to fix it.
What is better one piece or two piece toilets?
When it comes to one piece or two piece toilets, it really comes down to personal preference and what kind of space you’re working with. One piece toilets, as the name suggests, are one unit and are generally considered more aesthetically pleasing and easier to clean as they don’t have crevices.
They are usually more expensive than two piece toilets and can be more complicated to install, particularly if they require wall-mounted installation. Two piece toilets consist of a separate bowl and tank, and are usually more affordable and easier to install than one piece toilets.
They can be more difficult to clean, as dirt and grime can accumulate in the crevices between the tank and bowl. Ultimately, it is up to you to decide what is better for your bathroom and budget, but both one piece and two piece toilets have their own pros and cons that should be considered before making a purchase.
What do I need to know about replacing a toilet?
Replacing a toilet is actually a fairly straightforward process, but before you get started, there are several important things you need to know.
First of all, you need to make sure you know exactly what kind of toilet you’re going to be installing, as this will determine the type of materials and tools you’ll need for the job. You need to measure your existing toilet flange and tank in order to choose the correct size of the toilet.
Once you have the toilet, you need to read through the installation instructions in order to make sure you have all of the necessary tools and materials for the job.
Beyond the age of your existing plumbing system, the installation process can also be impacted by the flooring and type of material used, so be sure to read all instructions carefully. In most cases, you will need a hacksaw, an adjustable wrench, a putty knife, a plunger, a drill, a screwdriver and a few construction-grade bolts and screws.
Next, you will need to properly prepare the area, this includes disconnecting the water supply line, draining the tank, removing the old bolts and nuts connecting the toilet to the floor, and disconnecting the wax ring that connects the old toilet to the flange.
Once the area has been prepped, you can install the new bolt set, wax ring and toilet tank. When setting the new toilet, make sure it’s level, with all mounting bolts attached and in place.
The last step is to connect the water supply line and check the flange for any leaks. If all goes well, you’ll be able to enjoy your new toilet in no time!
Is it easy to swap out a toilet?
No, it is not necessarily easy to swap out a toilet. Depending on the type of toilet that is being replaced, the procedure can vary. Toilet replacement may require the expertise of a professional plumber, or the job can be done by a person with some home improvement skills.
Depending on the difficulty of the job, the time it takes may vary from a few hours to a full day.
Before you begin the process of replacing a toilet you must prepare the area. It is recommended to turn off the water system and flush the toilet so that all the water is removed. To remove the old toilet, you must unscrew the bolts that hold it in place.
The wax ring located at the base of the toilet should be discarded. When it comes to placing the new toilet, you must make sure that it is in the correct position. Once it is in the correct position you must make sure that the wax ring is properly secured.
After that, the bolts will need to be tightened in order to secure the toilet in place.
In summary, it is not necessarily easy to swap out a toilet and professional expertise may be required in order to properly do it. In most cases, it requires service of a professional plumber, and the process can take anywhere from a few hours to a full day.
Proper preparation must be done before the replacement process can begin. The old toilet must be removed and the new one must be installed in its place.
How do you change an old toilet to a new one?
To change an old toilet to a new one, you will need to follow these steps:
1. Turn off the water supply to the toilet by turning off the valves located on the wall behind the toilet or underneath the sink.
2. Disconnect the water supply line from the toilet by unscrewing the plastic connector from the bottom of the tank.
3. Remove the old toilet from the floor, using a screwdriver to remove the bolts that secure the toilet to the floor.
4. Place the new toilet in the desired location. Make sure the floor is level and the toilet is in the right position.
5. Secure the toilet to the floor with the new bolts that came with the new toilet.
6. Hook up the water supply line to the new toilet by threading the plastic connector onto the bottom of the tank.
7. Turn on the water supply and flush the toilet several times to check that it is working properly.
8. Clean up any mess you have made during the process.
Lastly, once completed, test the new toilet to ensure everything is working as expected, making sure there are no leaks or other issues.
Do bathroom fitters remove old bathroom?
Yes, bathroom fitters typically can remove old bathrooms. Depending on the age and complexity of the bathroom, the process can involve removing and disposing of components including toilets, basins, bathtubs, tiles, showers, taps, and walls, and floors.
Dealing with old plumbing in the removal process could prove to be a challenge, so it’s best to leave these kinds of tasks to experienced professionals. Additionally, some older bathrooms may contain asbestos, meaning special protective gear needs to be used when disposing of it.
No matter the age or complexity, bathroom fitters will have the expertise and tools necessary to help you with the removal of your old bathroom.
What’s the labor cost to remove a toilet?
The labor cost to remove a toilet depends on a variety of factors such as the size and type of toilet, location of the toilet, and the number of fixtures and connections that must be unscrewed and disconnected.
Generally, the labor cost for removing a toilet should not exceed three hours and typically costs between $150 and $225. In most cases, the cost to remove a toilet includes the cost to inspect connections and base flange, the cost to disconnect water supply, and the cost to remove the old toilet and properly dispose of it.
Some companies may charge a flat fee for all toilet removal services, while others may charge an hourly rate. It is important to shop around for the best price and be sure to confirm what services are included before hiring a plumber to remove your toilet.