No, not all toilet seats fit the same. Toilet seats come in a variety of sizes and shapes, designed to fit a variety of toilet models, designs, and shapes. Toilet seat sizes are typically measured by the size of the bowl, either round, elongated, and compact.
The problem with trying to purchase a toilet seat without knowing the shape/size of your toilet bowl is that it may not fit properly. To help ensure you purchase the right fitting toilet seat, measure the length and width of your toilet bowl.
Additionally, you may need to determine the mounting style of your toilet seat–typical styles include Standard, Hinged, “Cadet” and “Round-front”. Once you know the shape/size and style of your toilet bowl and seat, you can easily purchase a suitable replacement.
How do I know what toilet seat will fit my toilet?
The best way to determine what toilet seat will fit your toilet is to measure the width and length of your toilet bowl. Most toilet seats will fit toilets that measure between 16. 5-18. 5 inches in length, and 5.
5-8 inches in width. If your measurements exceed this range, you may need to look for an “elongated” toilet seat or a “round” toilet seat. Make sure that you measure carefully so that the seat that you select will fit properly.
You will also need to measure the distance between the post holes of the toilet bowl. This should be between 5-7 inches for a universal fit, but if you can’t find a toilet seat to fit your bowl, you may need to have a custom one made.
Once you know your measurements, you can begin to narrow down your search by selecting the size and style of toilet seat that fits your toilet. There are a wide variety of toilet seats available, so you can find one that fits your toilet and matches your bathroom decor.
Are toilet seat fittings different?
Yes, toilet seat fittings come in different sizes and shapes. You need to check the size of the hole in the toilet bowl before you buy a new seat to make sure it will fit. Standard toilet holes measure about 10-14 cm in diameter, but older toilets may require a larger fitting.
To find the right seat for your toilet, measure the diameter of the hole, both lengthwise and widthwise, and make a note of the exact measurements. Then look for a seat that lists your measurements as its size.
Most toilet seat fittings range in size from 12-18cm, but you may need to go outside of this range if your measurements don’t match up. Some toilets come with adjustable mounting systems, meaning you can fit any seat with a range of sizes.
Before fitting your toilet seat, delicately sand any areas that look rough or uneven to make sure the seat fits flush against the toilet bowl. Finally, follow the instructions on the seat fixtures, place the seat onto the bowl, and bolt the fittings into place.
Can you switch out toilet seats?
Yes, you can switch out toilet seats. There are many types and sizes of toilet seats available in the market from many different brands. Depending on the make and model of your existing toilet, you may be able to easily swap out the existing seat with a new one.
Alternatively, if the toilet is older, you may need to replace the whole toilet bowl in order to do the switch out. The process of switching out toilet seats requires a few simple steps and can be done within a few minutes.
Before beginning, it is important to ensure you have the right supplies and measurements, such as a measuring tape, screws, a screwdriver, and a wrench. From there, the process includes:
1. Shut off the water supply to the toilet and flush completely.
2.Remove the screws that hold the old seat in place.
3. Lift off the old seat and dispose of it.
4. Place the new seat on the bowl.
5. Make sure the new seat fits snugly and it is sitting level.
6. Use the screws and a screwdriver to secure the seat.
7. Turn back on the water supply.
8. Flush the toilet to make sure the new seat is functioning properly.
It is best to consult with a professional to complete the switch out properly and to ensure you followed the correct steps.
What are the two types of toilet seats?
The two types of toilet seats are round and elongated. Round toilets typically measure at 16 ½ inches, while elongated toilets measure at 18 inches. The difference between these two types is the shape of the bowl and seat, with the elongated version being oval-shaped and providing an extra seating area.
Round toilets are generally used in small bathrooms where space is a premium, while elongated toilets are often used in medium and large sized bathrooms. An additional option is the bidet toilet seat which adds a bidet functionality to the toilet, allowing users to clean themselves after use.
What are common toilet seat sizes?
Toilet seats come in a variety of sizes, however there are standard sizes that are most commonly used. These sizes typically range from 15” to 18” in length and 13” to 16” in width. Elongated seats usually measure 18” in length and 16” in width, while round seats generally measure 16” length and 14” width.
It is best to measure your existing toilet bowl before purchasing a new seat, as the shape and size of the bowl underside can vary between brands and models. For example, if your bowl is especially curved or elongated, your seat will need to be slightly longer than standard sizes to fit it properly.
Additionally, it is important to get the right type of seat as different materials, such as wood and plastic, may be compatible with some models but not others.
How do I know if my toilet is 2 or 3 inches?
If you’re uncertain whether your toilet is 2 or 3 inches, there are a few ways you can determine the size. First, you can measure the diameter of the drain pipe, as this will match the size of the toilet.
If you don’t have a measuring tool handy, you can also measure with a ruler or tape measure. Second, look at the base of the toilet for a black or metallic sticker with “2” or “3” printed on it. This number indicates the size of the toilet.
Third, you can inspect the black gasket at the back of the toilet. The gasket will match the size of the toilet, so a 2-inch toilet will have a 2-inch gasket and a 3-inch toilet will have a 3-inch gasket.
Finally, if you need further assistance, you can refer to your toilet’s owner’s manual, as it should indicate the size of the model.
Are most toilets 2 or 3 inch?
Most toilets are 3-inch flange drains, although 2-inch flange drains are becoming increasingly common as advances in toilet technology make them more efficient. The size of the toilet flange is used to describe the distance between the rough plumbing drain outlet and the face of the finished wall.
The flange size of the toilet is most often determined by the flooring material used in the bathroom, as well as the height of the toilet. The size of the flange also determines the type of toilet bowl and other parts used with the toilet.
While a 3-inch flange is the most common, a 2-inch flange may be needed for certain toilets, such as for corner toilets that have tighter spaces. Generally, it is recommended to use the same size flange drain as the rough plumbing drain in the bathroom, so that all the components fit together properly.
Can you replace the screws on a toilet seat?
Yes, you can replace the screws on a toilet seat. Depending on the model and make of the toilet seat, you may need a few tools to complete the process. You will need a Phillips head screwdriver, a flat head screwdriver, and possibly a wrench.
If you are replacing the old toilet seat with a new one, the new screws should come with the package. Before starting the work, be sure to turn off the water supply and flush the toilet so that the tank is empty.
Once you have all the tools and screws ready, begin the process of replacing the screws. If there is an old toilet seat still on the toilet, remove it by using the screwdriver to take out the screws.
Make sure to keep all the parts and screws as you might need to reuse some of them in the new assembly. Clean the area where the screws were placed, and then fit the new toilet seat in. Now insert the screws into the holes and tighten them by hand.
Finally, use the screwdriver or a wrench for a secure hold.
Make sure to tighten the screws properly, but be careful not to overdo it as you might strip the new screws. Your toilet seat assembly should now be secure and ready for use.
How do you remove an old toilet seat and install a new one?
Removing an old toilet seat and installing a new one is a relatively simple process, albeit a bit messy. Before getting started, ensure there is a bucket or container to catch excess water, as well as a pair of gloves and cleaning supplies to wipe away any residue.
First, flush the toilet and close the shutoff valve beneath the tank to stop the flow of any additional water. Next, remove the nuts from the bolts underneath the seat. These nuts connect the seat to the bowl and can be loosened with an adjustable wrench.
Once the nuts are removed, you can easily lift the seat off the bowl.
Next, use a cleaning solution and warm water to scrub down the area around the bowl and the underside of the seat. Once the surface is completely wiped down and dry, it’s time to start the installation process.
Place the new seat on the bowl and line up the bolt holes, then tighten the washers and nuts using the adjustable wrench. If your new seat came with rubber or plastic gaskets, place a gasket on each bolt and press it into the seat.
Next, seal the area between the seat and the bowl with a silicone adhesive; this will ensure a tight, water-resistant fit. Make sure to use the adhesive sparingly, or it may cause leaking. Finally, attach the lid to the seat using the existing screws, and re-open the shutoff valve.
Your new toilet seat is now ready to use.
Do you need a plumber to replace a toilet seat?
Replacing a toilet seat is something that is relatively straightforward and can be done by most people who have a basic understanding of plumbing. If you have never replaced a toilet seat before, however, it is a good idea to call a plumber.
This is especially true if your toilet has complicated installation features or specialized parts, as a plumber can ensure the installation is done correctly and correctly fit the seat to the toilet.
Furthermore, depending on the make and model of toilet you have, you may only have access to specific replacement parts, and a plumber will be able to make sure you have the right parts to fit your specific toilet.
How often should a toilet seat be replaced?
The answer to this question depends greatly on the type of toilet seat that you have. If you have the standard plastic seat, then you should consider replacing it every couple of years. But if you have a more expensive option like a wooden, padded, or heated seat, then they typically will last longer, and you may only need to replace it every 5-7 years.
Additionally, if your toilet seat is exposed to heavy use and/or frequent cleaning with harsh chemicals, then it will likely need to be replaced more often.
Regular inspection of your toilet seat can help you determine when it is time to replace it. Signs that your toilet seat needs replacing include cracking or discoloration of the plastic, the plastic seat becoming brittle or brittle-looking, and any signs that the hinges may need replacing, such as squeaking or becoming less sturdy.
If any of these signs are present, then it is likely time to replace the toilet seat.
Who is responsible for replacing a toilet seat?
The responsibility for replacing a toilet seat typically falls on the homeowner. If the toilet seat is part of a landlord-tenant situation, such as in an apartment, the responsibility may fall on the landlord.
However, keep in mind that replacing a toilet seat is generally a relatively quick and easy task, so it may not be worth the time reaching out to a landlord to handle it.
If you’re looking to replace your toilet seat, you can find most supplies at your local home improvement store. In some cases, you may need to purchase multiple items in order to replace the seat, such as a new set of mounting bolts or a new wax ring.
Before making any purchases, it’s a good idea to measure your existing seat and make sure the new seat you purchase is the correct size. It’s also worth noting that while there are various styles of toilet seats available, the installation process is fairly similar.
How much does it cost to re seat a toilet?
The cost of reseating a toilet will depend on many factors, such as the type of toilet, the degree of damage, and the type of repair or replacement needed. In most cases, it can cost anywhere between $150 and $350 for labor and materials.
If the bowl or tank needs to be replaced, the cost may range from $200 to $400 for a low- to mid-range porcelain toilet. High-end porcelain toilets with special features, including one-piece toilets, can cost up to $800 or more to reseat.
Labor costs for installation can run from $125 to $200.
If only the wax ring needs to be replaced, the cost for the materials is typically just a few dollars. You might be able to do the repair yourself. If you do choose to hire a professional, you should expect to pay upwards of $150 in labor costs.
Ultimately, the cost of reseating a toilet will always depend on the types of materials and parts needed, as well as any necessary labor.
How do you install a toilet for beginners?
Installing a toilet for beginners can be a daunting task. But with the right tools, you can do it pretty easily! Here are some steps you can follow to successfully install your toilet:
1. Start by shutting off the water supply to the toilet. This can usually be found right beneath the toilet.
2. Once the water is off, use a drain pipe wrench to loosen and remove the old toilet. It is important to wear gloves so you don’t get your hands dirty.
3. Clean the area where the toilet will be installed. This helps make sure you have a clean, level surface to work with.
4. Set the new toilet on the flange and press it down firmly. Use a level to make sure it is straight before you begin to bolt down the toilet.
5. Install the wax ring and toilet bolts. Make sure the bolts are not over-tightened or too loose.
6. Connect the water supply line to the toilet. Be sure it’s tight and not leaking.
7. Turn the water back on and flush the toilet to check for any leaks. If the toilet does not flush properly, make sure the chain is attached correctly.
8. Finally, install the toilet seat and lid and you’re done!
Now you have a brand new toilet that you installed all by yourself! Installing a toilet may seem intimidating at first, but with the right tools and some patience, it can be a fun project.