Removing flooring from under cabinets can be done in a few different ways depending on the type of flooring you are dealing with. For tile or vinyl, you may need to dislodge the tiles from the backing, which can be done best with a caulking or putty knife.
You can remove adhesive from the tiles either by hand or with a scraper, depending on what adhesive was used. For hardwood flooring, the process is a bit more difficult as you may need to carefully pry the planks up from around the underside of the cabinets.
Prying can be done by using a utility knife or a crowbar, taking special care not to chip or damage the surfaces of either the floor or the cabinets. Once the planks are up, you may need to remove any residual adhesive.
This can be accomplished by using a scraper or a specialized adhesive remover. Additionally, you can use a floor stripper to remove more stubborn adhesive.
Does flooring get installed under cabinets?
The short answer to this question is “it depends. ” It all depends on what kind of flooring is being installed and in what room the cabinets are located. If hardwood flooring is going in a kitchen, yes, it needs to be installed under the cabinets.
However, it often isn’t necessary to lay flooring under the cabinets if the cabinets are located in a bathroom or other room with tile or linoleum flooring. The key to keeping the flooring even around the cabinets is the installation process.
If the contractor is skilled, he or she can create a flat and even floor surface where the cabinets will be. But if a contractor isn’t very skilled, it isn’t beneficial to skip the installation under the cabinets in order to save time.
In the end, it’s important to talk to the contractor about the best course of action for the particular job at hand.
What is the easiest way to remove glued down wood flooring?
The easiest way to remove glued down wood flooring is to use a chisel and a hammer to begin removing it in small sections. Start at one of the edges and place the chisel lengthwise between the flooring and the subfloor.
With a gentle tapping motion, begin loosening the adhesive underneath the boards. Once enough adhesive is loosened, use a pry bar or crowbar to lever out the boards. It may be necessary to use a putty knife to help pry the boards up.
As you’re removing each one, use the chisel to scrape off any excess adhesive. Once the boards are removed, use a damp rag to wipe any remaining adhesive off of the subfloor. Vacuum the area to get rid of any dust and debris.
Once the subfloor has been completely cleaned off, it should be ready for a new flooring installation.
Why don’t you put flooring under kitchen cabinets?
The short answer is that there is typically no need to put any type of flooring material underneath kitchen cabinets. This is because kitchen cabinets are typically installed directly onto the subfloor or a layer of plywood, and are thus already stable and secure.
Furthermore, laying down any type of flooring material below the cabinets could potentially cause damage over time due to shifts in humidity and temperature. It could lead to squeaks, warping, or even buckling of the flooring material.
Additionally, kitchen cabinets are usually installed in such a way that the finished floor is level with the location of the bottom of the cabinets. This eliminates potential problems with water damage, drafts or air leaks, or dust that may accumulate beneath the cabinet.
Furthermore, the flooring under kitchen cabinets is usually in a spot that is difficult to clean or is often obstructed by other appliances or cabinetry. This means that if flooring was installed, it may be difficult to sweep or mop underneath the cabinets without having to move things around.
In conclusion, there is no need to put flooring under kitchen cabinets as the cabinets are already secure and installed in such a way that obscures any potential dust or moisture from getting to the floor.
What dissolves flooring glue?
Depending on the type of glue. Generally speaking, isopropyl alcohol, mineral spirits, and acetone are all effective solutions that can be used to dissolve most types of flooring glue.
Isopropyl alcohol, otherwise known as rubbing alcohol, can be used to dissolve most common types of flooring glue. Isopropyl alcohol is an all-purpose cleaning product that’s readily available and known for its strong solvency properties.
It is important to use it in a well-ventilated room, as the fumes can be hazardous.
Mineral spirits can also be used to dissolve many types of flooring glue. Mineral spirits are petroleum-based products that are designed to cut through tough petroleum-based oils and greases. They are also a powerful yet safe solvent that can be used to dissolve many types of flooring adhesives.
Acetone is a powerful solvent that is often used to dissolve various types of flooring glue, including flooring tiles and PVC adhesive. Acetone is the active ingredient in nail polish remover, but can also be purchased in a pure form.
It should be used in a well-ventilated area as the fumes can be hazardous.
Whichever option you choose, it is important to test it out on a small area of the flooring first before using it on the whole surface. This will help to ensure that the solution does not damage the flooring or cause discoloration.
Additionally, make sure to wear protective clothing and goggles when using any of these dissolution solutions.
Does WD 40 Remove floor adhesive?
Yes, WD-40 can be used to remove floor adhesive. WD-40 is a multi-purpose product that has a multitude of uses. As a solvent, it can be used to loosen and dissolve tough adhesives, like floor adhesive, sealants, and other sticky substances.
So if you have any stubborn residue left over from ripping up old linoleum or carpet, you can use WD-40 to break down the adhesive and make it easier to remove.
To use WD-40 to remove floor adhesive, start by dampening a cloth or soft brush with WD-40 and then use it to scrub away the adhesive. Once you’ve broken down the adhesive, use a putty knife to scrape away any remaining residue.
When you’re done, you can use a damp cloth to wipe away any remaining residue. It’s critical to remember to wear gloves and old clothes, and also open any windows to make sure the area is ventilated.
WD-40 is a great way to remove floor adhesive, but it’s important to note that, while it can be effective, it may take some elbow grease, so patience is key. It may also take multiple attempts and, if you’re dealing with any kind of major adhesive job, using professional floor strippers may be a better solution.
Do cabinets sit on top of flooring?
Yes, cabinets generally sit on top of the flooring. Although it is possible to install cabinets before laying the flooring, it is often easier to install the cabinets after the floor has been laid. This is because the flooring can give the cabinets a flat and even surface upon which to rest, making them easier to install.
Furthermore, if the cabinets do not have levelling feet, the floor can help make sure they are level. Of course, it may be necessary to use a different type of foundation to make sure that the cabinets are properly secured to the floor and won’t move when someone opens or closes a door or drawer.
Is it better to install tile flooring under kitchen cabinets or not?
It depends on the specific situation and the specific tile being used. Tile is a great choice for kitchen flooring, as it’s both durable and easy to clean. Generally speaking, tile should be installed after kitchen cabinets as this allows for easier cleaning and maintenance of the space.
Installing the tile before the cabinets can also increase the chance of cracked or uneven tiles due to the heavier weight of the cabinets. Additionally, tile installed before cabinets may be more difficult to replace or repair in the future.
Overall, when deciding whether or not to install the tile before kitchen cabinets, it’s important to consider what type of tile is being used, the type of substrate it is being applied to, and the expected weight of the cabinets as well as any future maintenance needs that may arise.
Why do people put tile under cabinets?
Tile under cabinets is a popular choice for many homeowners and interior designers because of its versatility and ability to create a custom look in a kitchen or bathroom. Tile is a hard, water-resistant material that is easy to clean, making it the ideal surface for areas where liquids and moisture are present such as under the cabinets.
Additionally, tile can be used to make kitchens and bathrooms appear larger, create a textured feel, or just make any space more inviting and attractive. The tile can also be easily cut and shaped to fit around corners and archways to create unique designs.
Furthermore, with the wide variety of colors, materials, textures and sizes available, homeowners can easily find the perfect tile to suit their tastes and space. Lastly, tile lasts a long time without requiring much upkeep, ensuring that the cabinets and the area around them look great for years.
How do you dissolve wooden floor glue?
Removing wooden floor glue is a fairly straightforward process. The first thing to do is to determine the type of glue that is currently on the floor. If it is an oil-based glue, you will need a specialized cleaner specifically designed to dissolve the glue.
If it is a water-based glue, you can use a mixture of warm water and dish soap or even a combination of warm water, vinegar, and baking soda.
Once you know what type of glue you are dealing with, you can start the process of dissolving the glue. If it is oil-based glue, start by spreading the cleaner over the area of glue and then allowing it to sit for a few minutes to allow the chemical to break down and soften the glue.
After a few minutes, you should be able to use a scraper or a putty knife to scrape the glue from the floor.
If the glue you need to dissolve is a water-based glue, start by mixing together a solution of warm water and either dish soap or a combination of vinegar and baking soda. Then spread the mixture over the glue and allow it to sit for a few minutes.
When the glues become soft, you can use a scrub brush or a putty knife to remove the glue from the floor.
Some people may find it helpful to use a steam cleaner to dissolve the glue as well. Just be sure that the steam cleaner is the correct temperature to not damage the floor and that the steam of the cleaner is strong enough to soften the glue.
The best way to make sure that you’re successful in removing wooden floor glue is to use the right tools and products. Being patient, following the instructions, and taking your time will also help ensure that you get the job done right.
How to remove glued down wood flooring from plywood subfloor?
Removing glued down wood flooring from plywood subfloor is not always a straightforward task, but it can be done if you follow the correct steps. First, you must be sure that the wood flooring is in fact glued down, as some flooring may have simply been nailed onto the plywood.
To confirm if the wood is glued, you can carefully pry up a small corner of the wood flooring, and if you see that it has been glued, you can then proceed with removal.
Next, you should cover the area with plastic sheeting to protect any other flooring in the area, such as carpet. Once this is done, use some type of long stripping tool to start at one end of the flooring and work your way across the entire space.
This will allow you to score the adhesive and loosen it up. Once the adhesive is scoring, you can begin to lift the flooring off of the plywood. It is also possible to use a heat gun to soften the glue and make removal easier.
If you have scored the adhesive from the floor and have not had success with removal, you may need to use a chemical stripper. If this is the case, it is important to read the instructions for the chemical stripper carefully and follow all safety instructions.
The chemical stripper should be applied to the glued floor, and after a period of time, scrubbed to ensure all of the adhesive has been removed. Once all of the adhesive has been removed using either method, use a shop vacuum or damp mop to remove all dust and residue.
Removing glued down wood flooring from plywood subfloor can be a strenuous task, but with the correct steps, it can be accomplished. Be sure to be patient and take caution when using any type of stripping tools or chemical strippers.
Once the flooring has been removed, you can then proceed with the installation of your new flooring.
How do you lift glued flooring?
When lifting glued flooring, the best way is to use a combination of heat, specialized tools and patience. You should start by using a heat gun or hair dryer to slowly heat up the area you’re trying to remove.
This will help to weaken the adhesive bond and make it easier to remove the flooring. Be sure not to overheat the area, as this can cause damage to the floor.
You’ll also want to use a scraper or chisel to help remove the glued flooring. Position the scraper at an angle and gently chip away at the flooring material. As you become more proficient at this, you can apply more force to speed up the removal process.
Lastly, use a vacuum cleaner or shop vac to remove the glue. A vacuum will suck up the glue and other debris in the area and make it easier to clean. You may have to repeat the heat-scraping-vacuum process several times to completely remove the glued flooring.
With patience and the right tools, you should be able to remove the glued flooring without causing any damage to the surface.
How much does it cost to remove glued down hardwood floors?
Removing glued down hardwood floors can be a difficult and time-consuming process, and it can also be quite expensive. Depending on the size of the area being worked on and the condition of the floor, the cost to remove glued down hardwood floors can range from a few hundred dollars to several thousand.
This is due to the fact that the labor involved can be quite extensive.
In most cases, the labor involved in removing glued down hardwood floors includes removing the baseboards, cutting and prying the floorboards apart with a crowbar, carefully removing and demolishing any damaged boards, and finally, grinding away any remaining adhesive with a grinder or sander, as well as refilling any gaps in the flooring.
The cost of this labor can range from $2. 50 to $5. 50 per square foot, depending on the complexity of the job and the number of specialists needed. Additionally, you will also likely need to purchase various tools, materials and supplies such as a floor scraper, crowbar, sander, and nails, glue, and screws needed to repair the areas where the floorboards were removed.
The cost of these materials can range from $0. 50 to $2. 00 per square foot.
Ultimately, the total cost to remove glued down hardwood floors will depend on the size and condition of the floors, the complexity of the job, and the number of specialists and materials needed. Additionally, the cost may be lower if the homeowner is willing to complete some of the preparatory work, such as removing baseboards and nails.
Should I remove tile under kitchen cabinets?
Removing tile under kitchen cabinets is generally not recommended unless you’re planning to replace the flooring or make a significant renovation. If you’re looking to make a minor change to the look of your kitchen, you’re better off installing wallpaper or a back splash to freshen up the area.
Removing the tile is a labor-intensive task that can harm the flooring along the way. Furthermore, cabinet installation typically rests on the existing tile, which may shift when you disturb the flooring.
Doing the tile removal yourself requires a tiling chisel, hammer, and safety equipment. You should also be prepared to dispose of the broken tile on your own. It’s best to consult with a professional contractor who can provide a detailed assessment of potential problems and costs before proceeding with a major project such as replacing tile under kitchen cabinets.
Is it better to remove tile or tile over?
It depends on a variety of factors to determine whether it is better to remove tile or tile over. Generally speaking, it is better to remove the tiles if there is something wrong with the existing tile such as a crack, loose grout, visible mildew and discoloration, or if the existing tiles are peeling off.
Removing tiles will also allow you to assess any possible underlying issues that could be causing the tile to be in a degraded state in the first place. Tiling over existing tiles should be done only after the underlying issue has been addressed.
In certain cases, tiling over existing tile is an acceptable solution. For example, if you want to change the color of the tile or there is a slight bump, tiling over is an option. If you are tiling over, make sure the surface is cleaned and free of dirt, dust, and grease.
Also, you should use an appropriate, thin-set mortar and make sure the existing tile is even. In addition, using a tile patching material, such as a thin-setting cement-based patching product, can help to fill in any gaps or cracks in the existing tile.
When deciding whether it is better to remove tile or tile over, it is important to consider the condition of the existing tile, the existing space, and the desired outcome. Consulting a professional tiling contractor can help you to determine the best course of action for your project.