Measuring for a tub surround is a simple process, but it is important to take precise measurements before you begin purchasing material. Begin by measuring the width of the tub from edge to edge and the height of the walls from the top of the tub edge to the ceiling.
Make sure to also measure any angles, alcoves, or other non-standard parts of the tub. Once you have your measurements, you can begin to assess what types of materials and pieces you need for the surround itself.
Make sure to carefully measure the thickness of your existing wall substrate (such as drywall, cement board, or panel) at multiple points to ensure that the surround material you select is compatible with your existing substrate.
You will also need to measure the lengths of the shower door frames or shower curtains you haveselected before you can purchase the necessary pieces and components.
Lastly, measure any built-in shelves or recessed areas you need to consider into your tub surround design. Knowing all of these measurements prior to purchasing your materials will help to ensure that you select the correct sizes and components for your particular project.
What is the standard size of a tub surround?
The standard size of a tub surround typically depends on the size of the bathtub it is being installed around. Most tub surrounds are made to fit the standard bathtub sizes between 60 to 72 inches in length and 30 to 36 inches in width.
However, some tub surrounds can be customized in size and shape to fit the specific dimensions of any tub. It is important to measure the exact dimensions of the tub before purchasing a tub surround in order to ensure a proper fit that provides adequate coverage of the tub.
Can you put any tub surround with any tub?
No, tub surrounds and tubs must be compatible in order to be installed properly. When shopping for a tub surround, make sure to consult the sales associate to ensure that your surround will fit with the tub you are purchasing.
Tub sizes range from 36″ to 72″ in width and 18″ to 60″ in depth. Tub surrounds typically come in 3-piece or 5-piece sets and can range in various sizes and densities. The size of the surround must be slightly smaller than the size of the tub so that it can be securely installed.
Quality of the tub surround is also essential — it should fit snugly and include a waterproof sealant. Additionally, when selecting a tub surround, consider your space’s aesthetic and choose a surround that will complement the space.
Are tubs measured from the inside or outside?
The measurement of a tub generally depends on how you choose to measure. If you take an outside measurement, it would measure from the very outer surface of the tub on all sides. However, if you measure from the inside, you would measure from the inner surface of the rim of the bathtub on all sides.
Generally, when purchasing a tub, it is best to take an inside measurement of the bathtub so you know it will fit in the space you have available.
Does a tub surround go over drywall?
Yes, a tub surround can go over a drywall. Installing a tub surround system over a drywall is a fairly straightforward process, as long as you take the correct steps. First, you will want to make sure that the drywall is securely installed and is structurally sound.
This can be done by having a professional contractor inspect the drywall before installation. After the drywall has been inspected, it will need to be cleaned and primed with a bonding primer, to ensure that the tub surround adheres properly to the drywall surface.
In addition to cleaning and priming, it is recommended to also add a layer of water-resistant drywall compound to the entire surface.
Once the drywall is ready, you will need to begin placing your tub surround panels. Depending on the type of tub surround you choose, you may need to install caulk around the perimeter, as the panels may not fit the wall perfectly.
At this stage, you will also want to reinforce the panels with a layer of fiberglass mesh. Once the panels are in place, you can finish them with a layer of grout or caulk, depending on the type of surround you have chosen.
Finally, with all of the installation steps complete, the tub surround is ready to be used. Keep in mind that it is important to periodically check the caulk and any exposed grout to make sure it is not deteriorating or cracking.
Furthermore, if the tub surround gets wet, it is important to dry it out as soon as possible, to prevent any further damage to the drywall.
How wide should a tub wall be?
The width of an appropriate tub wall depends on the size of your bathroom and personal preferences. In general, you want to leave approximately 15-18 inches of space from the outside of the tub to the wall.
This provides enough space to comfortably enter and exit the tub as well as enough room for shelving and any other accessories you may want. Be sure to measure your bathroom to ensure that your tub wall does not encroach too far into the available space.
The standard width for a tub wall is typically 4 feet, ranging up to 6 feet. It’s also important to consider the height of your tub wall, as taller walls may need an additional 18 inches to provide comfortable entry.
Ultimately, the width of your tub wall will depend on the size of your bathroom, so be sure to plan accordingly.
What are the bath panel sizes?
The size of the bath panel required is based on the size of the bathtub. Generally, a standard bath panel size is 1700mm long and the average height is 550mm. However, this may vary depending on the type of bathtub and the layout of the bathroom.
For example, if the bathtub has been installed close to a wall, the bath panel may be slightly shorter. Additionally, if the bathtub is positioned within a corner, the bath panel may need to be longer or even two separate pieces of paneling.
It is important to ensure that the bath panel fits securely in place and covers the entire bottom of the bathtub. Furthermore, if the bath panel is being used in a freestanding setting, the panel should be long enough to extend from one side of the bathtub to the other.
What is the rough in dimensions for a tub shower combo?
The rough in dimensions for a tub shower combo will depend on a few factors, such as the type of tub and the type of shower unit that are being installed. For example, an alcove tub with an acrylic surround requires a rough in width of at least 24″ and a minimum height of 30″.
If a drop-in tub is being used, then a minimum width of 54″ and minimum height of 72″ is required for the rough in. If a whirlpool tub is being used, then a minimum width of 60″ and minimum height of 72″ is required for the rough in.
In addition, the type of shower unit used will also affect the rough in dimensions. For example, a one-piece tub shower unit requires a rough in that is at least 24″ wide and at least 60″ tall. However, if a tub and shower combination with separate tub and shower units is used, then a minimum rough in of 30″ x 60″ is required.
How far should wall stick out past tub?
When it comes to the question of how far the wall should stick out past the tub, the answer depends on the needs and preferences of the homeowner. Generally, for aesthetic purposes, a wall should extend about one inch past the edge of the bathtub.
This gap allows for the addition of tile or other protective covering, as well as a finished look around the tub. The size of the gap can be adjusted and customized as needed to accommodate any type of flooring material, such as carpet, tile, vinyl, or wood.
Additionally, some homeowners may opt to have the wall extend further if they choose to install a shower curtain rod and don’t want the fabric to touch the tub. Ultimately, the amount that a wall extends past the tub comes down to the preferences of the homeowner.
How much clearance do you need around a bathtub?
The amount of clearance space you should leave around a bathtub will depend on the type of tub you have. For example, alcove tubs require at least 16 inches of clearance on the sides, 22” in the front and 15” in the back.
Freestanding tubs may require up to 24-30 inches on the sides, 36” in the back and 32” in the front, while drop-in tubs usually require 18-20” on the sides, 28” in the back and 24-26” in the front. However, leaving additional clearance can provide for easier installation and movement around the tub during cleaning.
Additionally, you may want to leave extra room for any shelving or storage you need. The best way to determine how much clearance you will need for a bathtub is to consult with a professional, such as a contractor or installer.
They can help you determine the best number of inches needed for your tub and surrounding area.
What goes behind a tub surround?
When installing a tub surround, there should be a few things that go behind it to ensure proper installation. First, you will need a waterproof moisture barrier such as a plastic sheet or a waterproof paint.
This should go around the perimeter of the tub and up the walls. Make sure to overlap seams and seal with a good waterproof sealant. You should also have a wall backer material such as cement board or greenboard.
This goes along the walls and over the waterproof sheet. Use a bathroom grade adhesive to secure it in place. Finally, you’ll need the actual tub surround panels, which should be secured with adhesive.
Once the panels are in place, finish the edges around the tub with trim or tile. To ensure a good seal and reduce the risk of water leakage, you should caulk all of the seams around the tub.
Do you need cement board behind tub surround?
It depends on what type of tub surround you are installing. If you are using a three-sided tub surround, made of one material, such as vinyl or acrylic, then you may not need a cement board behind it.
However, if you are using a four-sided tub surround, made of multiple materials, such as tile and wood, then you will need to install a cement board behind it to protect the materials from moisture damage.
Additionally, some one-piece tub surrounds also require a cement board to be installed behind them.
Installing a cement board behind your tub surround is important as it provides an extra layer of protection against moisture that could damage your tub surround materials. It also ensures that you have a level and stable surface to work on, making it easier to lay out and install the tub surround materials.
When installing a cement board behind your tub surround, you will want to use cement board screws to affix the cement board to the wall studs, and you will also want to use thinset mortar and not just drywall compound to fill in any gaps or seams between the cement board and wall studs.
Should you caulk between tub and surround?
Yes, you should caulk between the tub and the surround. This is essential in order to prevent water from seeping through the joint and into the wall cavity behind the surround or tile. Caulking also serves to seal and protect the joint from potential damage due to expansion and contraction.
When caulking, be sure to use a mildew-resistant and waterproof caulk. Also, be sure to use the correct size and color of caulk, and take special care when cleaning and preparing the joint before caulking.
Make sure to push the caulk into the joint and evenly spread it with the finger or a tool designed for the purpose. Finally, be sure to wipe away any excess caulk.
Are all tub surrounds the same size?
No, not all tub surrounds are the same size. Tub surrounds come in a wide variety of shapes and sizes, so there is sure to be one that fits your needs. The most popular size for a tub surround is 60″ x 60″, although you can find larger, square surrounds, as well as oddly shaped ones that are more specific to certain shower and bathtub sizes.
Depending on the style and type of surround you choose, you can also find ones which are adjustable – meaning they can be cut and shaped to fit whatever tub size or shape you have. You can also find surround kits that are designed to fit various sizes so that you have the option of customizing it if necessary.
What is the standard tub shower size?
The standard tub shower size is typically 60 inches (152 cm) in length and 32 to 42 inches (81-106 cm) in width, with the height of the walls being between 60 to 72 inches (152-183 cm). Some showers can go as wide as 48 inches (122 cm) wide, but this is not the standard size.
The standard size of a shower stall is 36 inches (91 cm) wide and 72 inches (183 cm) in length, but many showers are smaller than that. A common size range for showers is 30 to 36 inches (76-91 cm) wide and 60 to 72 inches (152-183 cm) in length.
The wall height of the tub shower is typically around 82 to 90 inches (208-229 cm). The minimum height from floor to the top of the tub shower wall is 60 inches (152 cm).