Yes, you can set a toilet on top of tile. It is possible to place a toilet on top of any solid surface that is structurally sound, including tile. When setting a toilet on top of tile or any other surface, it is important to make sure it is securely attached.
A toilet flange and wax seal should be installed, as well as mounting bolts to secure the toilet to the floor. The wax seal will help to keep the toilet in place and prevent any water from leaking beneath it.
Also, the tile should be completely dry and level before the toilet is set, so that it sits securely. Following proper installation procedures and making sure the toilet is securely attached will ensure that it is set properly.
Should I install toilet before or after tile?
Generally speaking, it is best to install the toilet before laying the tile. This will save you from having to cut the tile around the toilet which can be a tedious job and can be tricky to get right.
Additionally, it will be easier and cleaner to install the toilet before laying the tile as the floor itself will not yet be tiled. Additionally, it can be better to install the toilet before the tile in order to ensure that the surface of the floor is as level and even as possible, as laying tile over an uneven surface can create problems and potential issues.
Should toilet flange sit on top of tile?
No, a toilet flange should not sit on top of tile. The toilet flange should be attached to the floor and be flush with the tile/floor surface. If the toilet flange is sitting on top of the tile, it will create a risk of leak and damage to the floor.
Installing a toilet properly requires proper alignment and secure fastening of the toilet flange to the floor. Proper installation techniques are necessary to prevent a leaking toilet and moisture damage to the surrounding areas.
Toilet flanges should be secured to the floor and then sealed with plumbers putty. Once the putty is dry and the surrounding areas clean, the tile should be laid and cut around the flange to ensure proper alignment.
If your toilet flange is already sitting on top of tile, you may need to remove the tile, adjust the flange and re-tile the floor. It is best to consult a professional if you have any doubts about installing a toilet flange properly.
Do you put flooring down before toilet?
In general, it is best to put the flooring down before installing the toilet in order to ensure that the floor is level and even. If a floor has an uneven foundation, then it may cause the toilet to become unaligned or leak.
If the flooring is installed before the toilet, then it will give a uniform base for the toilet to be placed. Additionally, when installing vinyl flooring, it is necessary to install a subflooring layer beneath it.
When installing a subflooring layer, it can be difficult to do if the toilet is already in place. Pulling up and cutting out the existing vinyl around the base of the toilet can cause damage, as can the installation of screws.
Therefore, it is best to put the flooring before the toilet.
It is also important to seal the floor around the base of the toilet to prevent water from seeping underneath. This can help to protect the subflooring and prevent possible rot. Sealing the floor before the toilet is installed makes it much easier to apply a proper sealant and is one of the most important steps in properly installing a toilet.
In conclusion, it is recommended to install the flooring before placing the toilet in order to ensure a level and even foundation as well as to facilitate the sealing of the floor. Doing so can also help to protect the subfloor and prevent damage caused by installing the toilet over an existing subfloor or vinyl floor.
Does toilet go on top of flooring?
When installing a toilet, the floor flange should be installed first. The flange is the part that attaches to the floor and provides a secure connection between the floor and the base of the toilet. The flange should be level and sealed with plumbers putty or a similar material, and should be secured to the floor with screws.
After the flange is installed, the toilet can then be set onto the flange. It should be secured with two or three bolts, which should be tightened to ensure a secure hold. If the toilet has a wax ring, the wax ring should be placed between the flange and the bottom of the toilet and then the toilet should be gently pressed down and secured with the bolts.
Finally, the flooring can then be installed around the toilet, up to the base of the toilet. The flooring should be cut around the flange so that the edges are flush with the flange.
How do you install a toilet flange over tile?
Installing a toilet flange over tile is a relatively simple but slightly tedious process. Here are the steps to follow in order to successfully install a toilet flange over tile:
1. Start by shutting off the water supply to the toilet and flushing the toilet until the bowl is empty. Unscrew the tank bolts and remove the tank. Carefully lift the toilet out of the floor with one hand under the bowl, followed by the other hand under the back half.
2. Remove any old wax or caulk from the toilet flange area. Carefully remove the old flange with a screwdriver or chisel and clean the area with a wet cloth or plastic scraper. Use a level to check if the floor is level, then use shims or a grout line to make sure the flange is level.
3. Place the new flange on the floor. Then, mark the flanges mounting holes on the tile. Use a hammer and chisel to chip away the tile where the mounting holes are marked, then chisel away the grout.
The hole should be large enough to fit the flanges mounting bolts.
4. Place the flange over the hole and drive the mounting bolts through the mounting holes. Make sure the flange is level, then use plumbers putty around the base of the flange to make a waterproof seal.
Tighten the bolts with a wrench.
5. Place some plumbers tape around the inside of the flange. Then, reinstall the bowl and tank back into the flange. Connect the water supply to the bottom of the tank and the closet bolts to the base of the bowl.
Turn the water supply on and check for any leaks.
Once everything is installed and tightened, you can use your wet cloth or plastic scraper to clean off any new caulk or putty on the flange. If there are any leaks, you may need to reapply the putty and tape or replace the flange completely.
Should you tile behind a toilet?
Yes, you should tile behind a toilet. Tiling the wall behind a toilet will create a visually appealing and hygienic environment for your bathroom. It gives the wall a finished look and provides protection from moisture and humidity which can be a problem in bathroom areas.
Tiling also makes it easier to clean, as it is waterproof, and can prevent mold growth. There are a variety of options available to suit different budgets, styles, and functions. It is also easy to install yourself as long as you follow manufacturer guidelines.
How long after laying tile can you install toilet?
It is generally best to wait at least 48 hours before installing a toilet after laying tile, to ensure that the tile is properly settled and that there is no risk of creating additional damage. The adhesive used for tiling needs time to fully cure and harden before heavy or concentrated loads are placed on it, and installing a toilet immediately after laying the tile may potentially cause cracking or other damage.
Additionally, if the toilet is shifted or moved during the installation process, it could cause disruption to the newly laid tile. Therefore, it is highly recommended that you wait at least 48 hours after tiling before installing a toilet.
How far below tile can toilet flange be?
The toilet flange, also known as a closet flange, should be installed at or slightly above the finished floor level. However, depending on the specific installation requirements, the toilet flange can be installed as much as 1/4 inch below the substrate and still maintain a sound seal.
It is important to note, however, that the flange should never be installed further than 1/4 inch below the substrate as the wax seal may not be able to compensate for any lower installment and a leak may occur.
Additionally, the flange should never be installed higher than the finished floor level as this could make it more difficult to install and secure the toilet.
For best practices, it is best to consult with a professional plumber to determine the most optimal installation requirements for your specific space. An experienced plumber will be able to accurately assess the installation space and provide the best guidance on how far below the tile the flange can be installed.
What do you do if the toilet flange is above the floor?
If the toilet flange is located above the floor, there are several potential solutions depending on your particular plumbing setup. The most common solution is to cut away a small portion of the flooring around the toilet flange, allowing the flange to fit flush with the floor.
This can be done by using a jigsaw or other appropriate saw. Once the flooring has been cut away, the flange can be secured with screws. Alternatively, if there are access points beneath the floor, the flange can be attached directly to the floor joists.
If the access points are too narrow for the flange, a raised flange adapter can be installed. It’s a specialized flange that fits on top of the old flange, providing an elevated surface for the toilet’s seal to attach to.
Finally, the flange can be extended by installing a piece of pipe. A thin, elongated pipe is attached to the top of the existing flange, providing a surface that is even with the floor. Before taking on any of these projects, it is important to consult with a professional plumber to ensure that you are taking the correct steps to safely correct the issue.
Does a toilet flange need to be anchored to the floor?
Yes, it is important for a toilet flange to be securely anchored to the floor. The flange is the part of the toilet directly connected to the sewer drain and is secured to the floor with screws or metal bolts.
If the flange is not properly secured, the toilet may rock and could eventually leak. Proper anchoring of the flange will ensure that the toilet is secure and functioning properly. It is advised to check the flange and secure it when replacing plumbing components or even when the floor is being replaced.
Can you reposition a toilet flange?
Yes, you can reposition a toilet flange. To do so, you will need to first reduce the height of the floor flange so that it is level with the finished floor surface and then you can reposition it. To do this you will need to use a circular saw to make the cuts, then use a non-shrinking grout and a putty knife to position the flange when it is level.
Be sure to leave about a quarter of an inch between the edge of the flange and the finished floor material for the best result. Once the flange is positioned correctly, you can use either sealant or plumbers putty to seal the flange and secure it in place.
It is also a good idea to use a wax ring that fits the size of the toilet and size of the flange when securing the toilet to the flange so that it is watertight.
Does it matter if toilet flange is not level?
Yes, it is important that toilet flange is level. If the flange isn’t level, it can cause the toilet to have an uneven, wobbly seal that can cause leaks. Additionally, the toilet won’t sit flush with the floor or drain properly.
To ensure the integrity of the toilet, seal and drain, it’s important that the toilet flange is level. To properly level the flange, use a level to check for any variance then use plastic shims to correct the level.
If necessary, you may also need to adjust the wax ring that is between the toilet and the flange to ensure secure fit.
How do I keep my toilet from rocking on tile?
The simplest and easiest solution is to add shims under the toilet. Shims come in various sizes and shapes and can be very effective at keeping the toilet level and stable. Another option is to use a toilet anchor.
This is a metal plate that you secure directly to the tile and then you attach the toilet bolts to the anchor plate. Both of these solutions should only take a few minutes to complete and can make your toilet much more stable and secure.
Additionally, when installing a new toilet, it’s important to ensure the base of the toilet is adequately sealed and make sure that you use the correct amount of bolts when bolting the toilet down. If these steps are properly taken, then your toilet should stay stable and secure from rocking on the tile.
What do you put under a toilet to level it?
When installing a toilet, it is important that it sits level. This can be done by placing one or more shims (thin pieces of wood) under the toilet. The shims should cover the entire area where the toilet base meets the floor.
Start by inserting the shims around the toilet, making sure that the surface is completely supported and level. Then, fill in any spaces with additional shims as necessary. Make sure to check that the shims are evenly spread for an even and level toilet installation.
Toilet shims are easily accessible at home improvement and hardware stores.