When planning a renovation, the order of installation for some elements can be important in ensuring a professional finish. In general, the rule of thumb is that all installations should go in before any flooring is installed.
This includes toilets, sinks, and any other fixtures that may be found in a bathroom, as well as electrical outlet boxes, baseboards, and other installations.
In the case of a toilet specifically, it is important that the toilet is installed before the flooring. When a toilet is correctly installed, it will rest on a wax seal that is set into the flange. This wax seal prevents water and bacteria from seeping into the cracks in the floor.
If the floor is installed first and the toilet is set on top of the flooring, the wax seal may not work properly and water may leak from the connection. This could cause more serious damage, including water damage and mold, if not taken care of immediately.
Therefore, to ensure that all elements in a bathroom or any other area of the home are correctly and securely installed, it is important that all installations are done before any flooring is installed.
Do you install flooring before or after toilet?
Typically, installing flooring before the toilet is recommended. This allows for the weight of the toilet to be supported by the floor, rather than the toilet being installed first and the flooring being expected to support the weight.
Installing the floor first also ensures that the toilet is properly sealed to the flooring to prevent leakage. Additionally, it is easier to install flooring around the toilet with it already in place, and since the toilet will remain stationary, you can focus on making sure the floor fits snugly against the base of the toilet instead of worrying about positioning it perfectly.
Do floor installers remove toilets?
Yes, floor installers are able to remove toilets. Toilet removal typically involves turning off the water, disconnecting the supply line to the toilet, disconnecting the wax ring and bolts, and using a pry bar to loosen and remove the toilet from the floor.
Depending on the type of toilet, a level may also be required to ensure the bowl is properly supported. Floor installers have the necessary skills and experience to handle such delicate tasks, and can ensure the toilet is removed without damaging the adjacent floors or walls.
Should vinyl flooring go under toilet?
Yes, it is recommended that vinyl flooring go under the toilet in bathrooms. Vinyl is a great choice for bathroom flooring because it is water-resistant and easy to clean. This makes it an ideal option for bathroom floors, where moisture and spills are likely.
Additionally, vinyl flooring is available is a variety of textures and finishes, so it can be customized to fit your home’s aesthetic. When installing vinyl flooring, it should be laid over a plywood underlayment to provide a level and stable surface for the vinyl to adhere to.
After the underlayment is installed, the vinyl should be placed around the toilet but not underneath it. Once the toilet is set in place, it should be sealed properly and the area around it should be caulked to help prevent leaks and warping.
This will help keep moisture from becoming trapped beneath the toilet, which can damage not only the vinyl flooring but also the subfloor.
Do toilets sit on top of tile?
Yes, toilets can sit on top of tile. Tiles are an ideal surface for a toilet, as they are highly durable and easy to clean. The majority of toilets will be able to rest securely on top of a ceramic tile floor, as long as the floor is completely level and the tile adhesive that holds the tiles down is strong enough.
Even if the surface isn’t perfectly level, small adjustments can be made to the toilet’s base to make sure it sits flush and secure on the tiled surface. It’s also important to use a quality wax ring seal when installing the toilet, to ensure an airtight seal is achieved and prevent any potential leaking problems.
Should toilet flange be installed before or after tile?
The toilet flange should always be installed before the tile is put in place. This is because a toilet flange needs to be properly connected to the floor of the bathroom in order to provide a sturdy base for the toilet and support for the toilet’s weight.
If the toilet flange is installed after the tile has been laid, the flange will not be level, and the seal between the flange and the toilet bowl will not be sufficient to keep the toilet firmly connected to the floor.
Additionally, installing the flange before the tile allows you to check that the flange is properly aligned with the drain and make any necessary adjustment.
Does a toilet flange go inside or outside the drain pipe?
The answer to this question depends on the type of toilet flange you are using. A toilet flange is typically a round metal or plastic ring that is part of the toilet installation. Its purpose is to secure the toilet to the floor and also to connect the toilet drain to the drain pipe.
For traditional toilet flanges, they are secured to the floor and protrude into the drain pipe, thus the toilet flange is located inside the drain pipe. This type of toilet flange is secured to the flange of the drain pipe via screws and provides a tight seal.
In recent years, a new type of toilet flange has been developed which can be placed outside the drain pipe. This flange looks very similar to a regular flange but is designed to fit over the outside circumference of the drain pipe.
It prefers to the floor with screws and can be tightened for a secure fit with a wrench. This type of flange is much more convenient to install since it does not require you to reach into the drain pipe.
The type of flange that you should use depends on the type of toilet, as well as the type of floor and drain pipe. If you’re not sure, then it’s best to consult a professional plumber.
Does toilet flange go over finished floor?
No, the toilet flange should not be placed directly over a finished floor. Instead, it should be installed on the subfloor beneath the finished floor with the bottom of the flange being flush with the top of the subfloor.
If installing a new toilet flange, or replacing an existing toilet flange, make sure to use a quality wax ring when connecting the flange to the underside of the toilet. It’s also important to properly seal the flange to the subfloor and around the toilet horn with a high-quality caulk that is specifically designed for use in bathrooms.
How do you install a toilet flange over tile?
Installing a toilet flange over tile can seem like a daunting task, but with the right tools and materials, the process can be completed in a few steps. The first step is to get the right flange fittings.
Be sure to get one that is compatible with the current drainpipe. Once you have the correct fitting, you will need to prepare the tile. Depending on the tile you have, you might need to use a specific type of drill bit.
In most cases, you will need to use a masonry bit to get through the tile. You should mark the hole you are drilling with a felt-tip pen and pre-drill using a sharp drill bit to ensure it is the right size.
Next, you will need to drill a larger hole in the tile to fit the toilet flange in place. Make sure the fit is snug by gently tapping the flange with a hammer. The next step is to caulk around the flange to ensure a tight seal.
Be sure to leave the flange above the tile by about one-sixteenth of an inch to prevent any water from seeping out. Lastly, you will need to attach the new flange bolt kit to the pipes and secure it with the proper anchors.
With these steps, you should have no issues installing your toilet flange over tile. Following these instructions will help make the process a breeze.
Do I have to remove toilet to tile floor?
It is possible to tile a floor that already has a toilet in place, although some additional prep work may be necessary. Start by sealing off the toilet to the floor, creating a waterproof barrier either with caulk or a specialized toilet sealant.
Next, make sure the area below the toilet is completely clean, removing any residual dirt and grime. Then install the tile, cutting it around the edges of the toilet as necessary. Once finished, make sure to use a waterproof grout with flexible properties to finish the job.
Although this can be a bit tricky, choosing the right materials is key for long-term success. If you are uncomfortable taking on this type of project it is always recommended to consult with a professional for advice.
Should you tile behind a toilet?
Yes, it is important to tile behind a toilet as it helps to protect the wall from moisture and potential damage like water spots, mold and mildew. Tile also helps to prevent stains and can make cleaning easier.
The tile also helps to create a beautiful and finished look in the bathroom. If you are installing a new toilet, many manufacturers recommend that their products be installed on tile for optimal performance and drainage.
However, if you are replacing an existing toilet, you may not need to tile behind it if the wall is in good condition and the toilet is properly seated.
What comes first toilet or tiles?
When it comes to remodeling a bathroom, it is important to consider the installation of both a toilet and tiles in order to properly complete the project. To determine which should come first, a number of factors must be taken into account.
If the floor of the bathroom is being completely redone, the tiles should be installed first. This allows a level and even surface to be created before the toilet is placed, which will help ensure it is properly secured and fitted.
However, if the bathroom has a solid, existing floor, then it can be beneficial for the toilet to be placed first as it can serve as the anchor for the overall space. Once the toilet is firmly in place, the tiles can be added around it.
Finally, the finishing touches can be added, such as grout and sealant, to ensure the toilet and tiles remain in place for years to come.
What do you put between tile and toilet?
The main thing you need to put between the tile and toilet of a bathroom installation is a watertight sealant, such as a silicone caulk or a special adhesive specifically designed for bathrooms and wet areas.
Additionally, for extra security and stability, a piece of plywood or cement board can be added beneath the toilet to hold it in place and provide extra support. The plywood/cement board should fit snugly against the floor and be secured to it, leaving a gap between it and the tile for the silicone sealant to go.
Once the sealant has completely dried, the toilet should be placed over the area and screwed securely into the plywood/cement board. Finally, an additional layer of sealant should be applied around the edges of the toilet where it meets the tile, to ensure a watertight seal.
What goes around the toilet on the floor?
The area around the toilet on the floor typically consists of some type of flooring material such as tile, linoleum, wood, or carpet. Depending on the type of flooring and personal preference, a baseboard may be used along the perimeter of the toilet to create a more finished look.
In bathrooms with tile floors, it is common for a grout line to be located just inside the baseboard. For extra protection, a sealant or caulk can be applied around the base of the toilet and along any grout lines to protect them from water damage.
Additionally, in bathrooms equipped with carpeted floors, it is important to have a waterproof barrier around the toilet to minimize the risk of water damage and keep the carpet intact.
What is the base under the toilet called?
The base underneath the toilet is called a toilet flange. It is a fitting that is usually made out of plastic or metal and is used to seal the connection between the toilet and the ground. It connects to the sewer pipe and the bottom of the toilet bowl and typically includes a hole for the waste line to pass through.
The flange needs to be securely attached to the floor because it provides stability to the toilet and also helps to prevent water from leaking out. It is also important to make sure that the flange is level with the floor so that the toilet is properly balanced.