If you are unsure of what drain stopper you have, you’ll need to take a look at the opening of the drain. Generally, drain stoppers come in two different varieties: popup drain stoppers, and lift-and-turn drain stoppers.
Once you’ve determined what type of drain stopper you have and you need to identify it for replacement, you may need to look for identifying marks on the body of the drain.
Popup drain stoppers are referred to as such because when the lever is engaged, a circular stopper inside the pipe tube will “pop up” and flow water into the pipe. Popup stoppers also have a bar that extends from the drain and will stretch all the way to the arm lever.
The bar is used primarily to attach the inner stopper and provide leverage in the engaged and disengaged position. These stoppers may be stamped with the manufacturer’s logo on the side or the underside.
Lift-and-turn drain stoppers are simple to identify because they have a lever that needs to be both lifted and turned. When the lever is lifted, a circular stopper is exposed and when it is turned it engages the popup stopper into place.
These drain stoppers will usually have the manufacturer’s logo stamped into the handle.
Once you’ve identified the manufacturer, you can begin searching for the replacement stoppers. Be sure to take careful measurements of the height, width, and length of the existing stopper so you are sure to install the correct size.
Are all drain stoppers the same?
No, all drain stoppers are not the same. There is a wide range of drain stoppers available on the market, including a variety of sizes, materials, and shapes. Generally, the most common type of drain stopper is the pop-up stopper, which can come in several different designs.
There are also silicone stoppers, hinged stoppers, basket strainers, lift-and-turn stoppers, as well as in-wall or invisible stoppers. Depending on the application, different drain stoppers may be more suitable.
For example, a putty stopper may be better in a kitchen sink than a pop-up stopper, or a silicone stopper may be better in a bathroom sink than a lift-and-turn stopper. It’s important to also know the size of the drain opening before selecting a drain stopper to ensure that the chosen stopper fits properly.
Can you replace the drain stopper in a bathtub?
Yes, it is possible to replace the drain stopper in a bathtub. It is a relatively simple project that can generally be finished in under an hour. The first step is to purchase the new stopper. You can either take the old one with you to the store or purchase one that is close in size or shape.
You can purchase these at most hardware stores or online.
Once you have the new stopper you should look under the tub and locate the lever that operates the stopper system. You will also need to locate the pivot rod as this will need to be removed as well. To do this you’ll need to remove the screw that holds the stopper linkage in place.
After that you will need to unscrew the nut that holds the pivot rod to the drain. Depending on your type of stopper, there may also be a cap on the top of the pivot rod that will need to be removed as well.
You can then slide the old stopper out and slide the new replacement in.
Finally, reassemble the linkage by replacing the screw and pivot rod nut, followed by reattaching the lever. Make sure to test the stopper to make sure it is functioning properly before replacing any of the trim pieces.
And that is it! With a little effort and some basic hand tools, you can replace the drain stopper in your bathtub.
Can a tub stopper be replaced?
Yes, a tub stopper can be replaced. Depending on the type of stopper, replacement can often be done in a few simple steps. A popular type of stopper is the toe-tapped type, which is opened and closed with your foot.
Replacing these types of stoppers involves removing the existing stopper, cleaning out the drain to ensure it is clear of debris, replacing any ball valves needed, purchasing the new stopper, aligning the components by following the directions from the manufacturer, and testing to make sure it opens and closes properly.
Other types of stoppers, like trip lever style or flip-cap type, will also require similar steps for replacing them properly. In either case, it is often feasible to replace the stopper yourself but if you have any doubts or questions it is advised to contact a professional.
What size bathtub drain stopper do I need?
When purchasing a new bathtub drain stopper for your bathroom, the size you need depends on the type of materials used on your existing drain and the size of the drain itself. To know what size you need, you can measure the overall size (from the top to the bottom) of the drain with a ruler or measuring tape and compare that size to the stoppers on the market.
Generally, most stoppers come in either a 2. 5 or 2. 75 inch size, so make sure you get the right one for your drain. Additionally, some models have adjustable sizes to make it easier to fit a variety of drain sizes, which can save you time if your drain measurements don’t match up with the standard dimensions.
Additionally, make sure to pay attention to the type of task the plunger is designed for; if you need a stopper for long, deep baths, make sure to get one that matches the size of your tub. It’s also important to make sure there are no loose parts or signs of damage when installing a new bathtub drain stopper.
It should be easy to insert and remove from the drain as well as securely connect to the linkage. Most importantly, make sure the stopper fits tightly and remains visible when pulled out of the drain.
What size is a standard tub stopper?
A standard tub stopper typically measures 2 inches in diameter and is designed to fit the standard size bathtub drain, which is usually 2 inches in diameter as well. Although most tub stoppers come in this standard size, they do come in a variety of shapes and sizes in order to fit different types of drains.
Examples of alternative sizes and shapes include 3-inch round tub stoppers, 2½-inch square universal fit stoppers, knotted hair catcher stoppers, push-button stoppers and flat stoppers. If you need help finding the right size for your bathtub drain, a local home improvement store likely has a variety of sizes and shapes that can accommodate most bathtub drains.
What are the different types of bathtub drain stoppers?
Bathtub drain stoppers come in a variety of different types, all designed to stop water from exiting the bathtub. The most common type is a Pop-up Stopper. This type of stopper features a dome-shaped faceplate with a knob that operates a stopper in the drain.
When the knob is turned one way, the stopper is released and water can travel down the drain. When it is turned the other way, the stopper seals the drain and traps water in the bathtub.
Another type of stopper is the Trip Lever Stopper. This type of stopper is often found in commercial bathrooms, and it works using a level to lift or close the stopper. This type of stopper is considered more hygienic because its flat faceplate makes it easy to wipe down the drain.
Another type of stopper is the Push-pull Stopper. This type of stopper is more appropriate for home use because it is more compact. To use this stopper, you push it into the drain to seal it when you are done using the bathtub.
To release it, you pull it back out of the drain.
The final type of bathtub drain stopper is the Lift and Turn Stopper. This type of stopper features two knobs connected to the flap inside the drain. Turning the knobs one direction opens the flap and releases the water, while turning them the other direction closes the flap and traps the water.
Are bath plugs standard size?
No, bath plugs are not standard size – there are several different sizes available to fit different types of bath. Generally, there are three common sizes: ‘small’ or ‘basin’ size, ‘medium’ or ‘shower’ size, and ‘large’ or ‘bath’ size.
The small or basin size fits most basins, the medium or shower size fits most showers, and the large or bath size fits most baths. When selecting a bath plug it is important to measure the hole accurately beforehand to make sure the plug you purchase will fit the hole correctly.
It is also important to consider the type of bath being used and the drilling, as some baths require a different type of plug due to the material used or the size of the hole. If you are in any doubt as to which size bath plug to purchase it is best to consult a professional to ensure the correct fit and to avoid any future problems.
How to unclog a bathroom sink drain with a non removable stopper?
Unclogging a bathroom sink drain with a non removable stopper can be challenging as it requires a bit of maneuvering by the person attempting to unclog it. This is why it is important to be patient and take your time when trying to unclog the sink.
The first step would be to locate the source of the blockage. This can be done by taking off the bottom part of the stopper and feeling around the areas near the drain with your hands or a plumbing snake.
Once you have identified the location of the blockage, try to place the plunger over the drain and pump it vigorously. This can dislodge any minor blockages.
Alternatively, you can use a chemical drain cleaning solution by pouring it into the sink and letting it sit for a while. This should help to dissolve any residue or grease that has accumulated in the drain.
If the drain is still clogged after trying the above methods, you can use a plumbing snake or auger by placing it into the drain and turning the handle until it reaches the blockage. This should be done with extra care, as introducing too much force may cause damage to the drain.
Once the blockage has been removed, run plenty of warm water through the sink to help clear out any remaining debris or residue. You should also check for any cracks or damage in the drain and get any necessary repairs or replacements done if necessary.
How do you remove a pop up drain stopper?
Removing a pop up drain stopper is a relatively simple process that can be done in a few easy steps. First, you will need to locate the linkage bar that is connected to the stopper. This bar can usually be found behind the drain.
Once you have found the linkage bar, pull up on it so that the stopper is released from the drain. Depending on the kind of stopper you have, you may need to rotate the knob on the linkage bar to loosen it from the drain.
Once you have done this, the stopper should be able to be lifted out from the drain. Then, you can use a wrench to unscrew the remaining pieces and remove them from the drain. After everything has been removed, you should be able to simply clean and replace your pop up stopper.
How much does it cost to replace a stopper in the bathtub?
The cost to replace a stopper in the bathtub depends on the type of stopper and the complexity of the installation. A simple rubber or plastic stopper can cost less than $10 to replace, while more complex designs, like toe-touch stoppers or push-pull stoppers, can cost up to $50.
In addition to the cost of the stopper, you may need to purchase other supplies, such as a shower rod, a screwdriver, and plumbing tools. It may also be necessary to call a plumber to install the new stopper, which can add even more to the overall cost.
If you choose to tackle the installation on your own, you also need to consider the costs of any damage you may cause when attempting the repair.
How does a toe touch drain work?
A toe touch drain is an efficient and convenient way to open and close a sink or bathtub drain. It operates using a simple lever-style switch, triggered when a person’s toe touches it. When the lever is pressed down by the toe, it engages the drain’s internal components, which then activate the drain.
This system prevents water from draining, or allows it to drain, depending on the lever’s position. Toe touch drains are sometimes preferred by those who have less reach or strength, including people in confined spaces or those with certain disabilities.
They require minimal effort to activate, since the user need only touch the toe lever to switch the drainage on and off. Additionally, they may be configured to support both surface and floor drains.
How does the drain in a bathtub work?
The drain in a bathtub works by allowing water to leave the tub through a pipe connected to the water system. This drainage pipe is typically connected to the sewer line, which carries excess water away to the main sewage system.
The drain will normally be located at the lowest point of the bathtub; this allows gravity to pull the water out.
The drain is usually blocked with a stopper to prevent water from getting out. This stopper can vary in design, but is typically opened or closed with a handle or lever. The stopper can be removed to allow water to flow out of the bathtub when it is time to drain it.
The lever or handle will also have an overflow hole that lets out any excess water that may have accumulated in the tub. Additionally, many bathtubs have a drain cover which can help prevent objects, hair, and soap scum from clogging the drain.
The entire drainage system is under pressure, so when the stopper is released, the water pressure is released, allowing the water to be pulled out of the bathtub by the main drainage pipe. If the system becomes clogged, the water will no longer flow freely, causing it to become backed up, so it is important to make sure the drain is clear and free of any debris.
Does bath water go down the same drain as toilet?
No, bath water should not go down the same drain as toilet water. This is because when waste such as feces and urine is flushed through a toilet, feces-laden water enters the drain, and this same water could back up into the bathtub and contaminate the bath water if it is on the same drain.
Furthermore, toilet and bath drains have are designed differently, so bath water which may contain soap, oils, hair, and other solids, can block the toilet drain because the pipes are too narrow. Plumbers also advise against using the same drain because drains can become clogged and even overflow from a buildup of soap and dirt particles.
What will dissolve hair in drain?
The best way to dissolve hair in a drain is by using a liquid drain cleaner. Generally speaking, these products contain natural enzymes that help break down and dissolve organic matter, such as fats and proteins.
Additionally, some brands include lactic acid, which helps to further break down and remove the hair. Pour the drain cleaner directly into the affected drain, let it sit for at least 15 minutes and then flush with hot water.
If the blockage does not clear, use a tool like a drain snake to help clear away the clog. Additionally, preventative measures like using a drain screen or strainer can help minimize the chance of a clog forming.