When installing a toilet flange to a bathroom wall, you should start by measuring the distance between the rear floor drain and the wall. It is typically recommended to leave at least 1/2 inch of space between the edge of the flange and the wall to allow for room for adequate wax ring compression around the flange once the toilet is installed.
Therefore, the rough-in for the toilet flange should be approximately 1/2 inch from the wall. This can vary depending on the size of the flange and the thickness of the wax ring. When in doubt, it is best to measure the distance for each specific project to ensure a successful installation.
How much room do you need from wall to toilet flange?
The standard distance from the wall to the toilet flange is 12 inches. This measurement should be taken from the back of the toilet to the wall. This distance may vary slightly depending on the type of toilet you have; most floor-mounted toilets require a 12″ minimum gap from the wall, while wall-mounted toilets require 14″ or more.
It is important to ensure that you leave enough room between the wall and the flange, as this can affect the fitting and performance of your toilet. You should also make sure to measure the clearance beneath your toilet, as this determines the height of the flange.
The clearance necessary for a toilet flange should generally be 2 inches, but be sure to refer to the instructions of the toilet you are installing to ensure the correct measurement.
How do I know if my toilet is a 10 or 12 rough?
To determine if you have a 10 or 12 rough toilet, you’ll need to measure the distance between the wall and the center of the toilet’s drain hole. This measurement is known as the rough-in and is typically 10 or 12 inches.
If you don’t find this measurement marked on the toilet or in the installation instructions, you can easily measure it yourself with a tape measure or ruler. Begin by placing your tape measure or ruler on the wall and extending it out until it touches the edge of the drain hole.
This will give you an accurate measurement of your rough-in, indicating if you have a 10 or 12 inch toilet. Knowing this dimension is important when selecting a new toilet as you’ll need one specifically designed for your rough-in size.
Is my toilet 10 or 12-inch?
The standard size for most modern toilets is a 12-inch rough-in. The rough-in is an industry term that measures the distance between the drainpipe and the wall. To determine the size of your toilet, you need to measure from the bathroom wall to the center of the closet bolt ( the long bolt that holds the toilet to the floor ).
If it is 10 inches, then you have a 10-inch rough-in toilet. If it is 12 inches, then you have a 12-inch rough-in toilet.
How do I know the rough in size of my toilet?
In order to determine the rough in size of your toilet, you need to measure the distance from the wall behind the toilet to the center of the waste outlet on the toilet. You can do this by measuring in a straight line from the back wall to the center of the waste outlet.
This measurement typically falls between 8 to 14 inches and is most commonly 12-inches. If your toilet does not have a waste outlet, you can measure the distance from the mounting bolts on the bowl. The standard toilet typically has two nuts located 12-inches from the back wall on either side of the bowl.
Knowing the rough in size is important to make sure that you purchase the correct size toilet for your bathroom.
Are all toilets 12 inches from wall?
No, not all toilets are 12 inches from the wall. The standard distance between the toilet and the wall is generally about 15 inches, although the exact measurement may vary slightly depending on the make and model of the toilet.
It’s important to measure the exact distance between the toilet and the wall before beginning any plumbing work. This will ensure that the necessary components, such as the toilet flange and toilet bowl, fit properly and are level.